Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the appearance of your motorcycle, but also emphasize the off-road look. effective protection against stone chips and run-overs high-quality technical workmanship made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle including mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

On-Road or Off-Road, with the R1300GS, BMW has once again improved the true all-rounder. However, the protection of the engine can still be individually optimized. With the Touratech Engine Protection Expedition, the heart of the machine is effectively protected, no matter where the journey leads. Professional protection for the engine and exhaust header. The Touratech Engine Protection "Expedition" offers optimal protection for your motorcycle. Dirt or stones kicked up by the front wheel do not reach the engine and header. Unpleasant damages, such as dents in the header or even holes in the engine block, are effectively avoided by the Touratech Engine Protection. For maximum stability, the multiple indented recesses in the 4 mm thick aluminum base plate play a key role. Additionally, the force of an impact is widely distributed thanks to the extra 3 mm stainless steel mounting plate on the engine. Ground clearance is not noticeably restricted in the process. The Touratech Engine Protection *Expedition* is thus one of the most robust on the market. Additionally, plastic rails at the lower part of the base plate ensure that the already recessed screw heads are completely covered. Almost incidentally, they also prevent dirt from settling. This means that the engine protection can still be easily disassembled even after heavy off-road use. Last but not least, the combination of a continuous underside and fiberglass-reinforced plastic rails facilitates the "sliding over" of stones, rocks, or tree stumps. A product that meets the highest technical demands and is visually an absolute highlight! Details: - made from 4mm thick aluminum reinforced with 3mm thick stainless steel - best protection for engine and header - plastic rails facilitate the "sliding over" of stones, rocks, or tree stumps - ground clearance is hardly affected - designed for optimal force distribution - easy to install - complete mounting material included - detailed installation instructions All in all, the large Touratech Engine Protection for the BMW R 1300 GS is a product that meets the highest technical demands and is visually an absolute "highlight"!

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle includes mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

ABE in preparation The Carbon fuel injector cover for the BMW R 1300 GS gives your motorcycle a unique. sporty-luxurious look. The high-quality carbon component is mounted directly on the cylinders of the boxer engine and is therefore clearly visible. The striking. exposed position of the carbon part emphasizes the noble appearance of your motorcycle and gives it a personal touch. The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component. The expertise gained from this flows into each of our products. improving every single component.The facts: Production in our own facility according to ISO 9001 Including ABE - Part is legal to use on the street Use of prepreg specially developed for Ilmberger Manufacturing in autoclave for maximum strength and perfect surfaces Unique plastic powder coating for protection and a special depth effect Hand lamination by experts with years of experience Precise edge cutting by robot High-gloss clear coat layer for a flawless surface No aging of parts thanks to multi-layer protection against UV light Delivery in ready-to-install condition TÜV-certified quality

This is a new part being offered Vehicle: R1300GS + Adventure Manufacturer: BMW Condition: New Description: sold as shownPart number: 11127109366

Der Zylinderkopfhaubenschutz aus Edelstahl schützt die Zylinderkopfhaube vor Kratzern und Steinschlägen. Zusätzlich ist er innen mit einem großflächigen Gummipuffer ausgestattet. Optisch ist der Zylinderkopfhaubenschutz perfekt auf das Design und die Linie des Boxermotors abgestimmt. Schutz der Zylinderkopfhaube vor Kratzern und Steinschlägen Optische Aufwertung und Veredlung  

ABE in preparation The Ilmberger Carbon Lower Engine Guard for the BMW R 1300 GS is the perfect upgrade for those who value optimal protection and a sporty-luxurious look. Thanks to experiences from trialsport. this engine guard offers the highest level of safety and reliability. The lightweight carbon material ensures maximum protection and gives your motorcycle an breathtaking look at the same time. Trust in the quality of Ilmberger Carbon and take your BMW R 1300 GS to a new level.The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component. The expertise gained from this flows into each of our products. improving every single component.The facts: Production in our own facility according to ISO 9001 Including ABE - Part is legal to use on the street Use of prepreg specially developed for Ilmberger Manufacturing in autoclave for maximum strength and perfect surfaces Unique plastic powder coating for protection and a special depth effect Hand lamination by experts with years of experience Precise edge cutting by robot High-gloss clear coat layer for a flawless surface No aging of parts thanks to multi-layer protection against UV light Delivery in ready-to-install condition TÜV-certified quality

The most comprehensive all-round protection ever for boxer engines!The Touratech Engine Crash Bar is there where it is needed to prevent damage!This also applies to the boxer engine of the BMW R 1300 GS with its favorable center of gravity but widely protruding cylinders. The high-load construction with its 4 independent mounting points forms a "cage" and completely encloses the components. This creates the most effective protection for cylinders, valve covers, and the sensitive lambda sensors! The 25x2 mm stainless steel pipes are for the first time supported by 3 mm thick, 3-dimensional formed stainless steel plates. These fit perfectly in both technology and design with the frame of the R1300GS. Because even there, the advantages of the formed plates with their significantly higher load capacity while maintaining low weight are utilized. The 3D formed plates of the Touratech Engine Crash Bar wrap protectively around the particularly vulnerable front area of the valve cover and secure it forward and to the side. By the way, it fits perfectly into the new flatter design language of the large "GS" and visually makes the crash bar a part of the motorcycle. The forces occurring in a fall or crash are safely absorbed, distributed and effectively redirected to suitable points of the construction and gently dissipated. Numerous predetermined bending points prevent overloads and thus protect the frame and engine. Made exclusively from robust electropolished stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their terror and can be easily polished out. The distance of the crash bars to the vehicle has been chosen to be as close-fitting as possible. There is no noticeable impact on ground or lean angle clearance, yet there remains enough space "to work". Installation is simple and quick through perfectly matched mounting points for the motorcycle. Complete mounting material is, of course, included in the delivery. In short: - complete protection of the cylinders, also to the rear and above - safe dissipation of occurring forces without damaging the frame and engine - no restrictions on lean angle or ground clearance - made from 25/2 mm stainless steel pipes and 3D formed components - Made in Germany TIP for perfect all-round protection: The ideal complement to the engine crash bar is our Fairing Crash Bar for the BMW R 1300 GS (035-5161).Also fits with "Option 719" / "Tramuntana".

Touratech Engine Crash Bar "Street" - the sporty protection for the cylinder and valve cover of your BMW R 1300 GS! The core of the Touratech Engine Crash Bar "Street" is the integrated sliding protection. This is perfectly contoured to the valve cover of the 1300 Boxer and positioned exactly where it needs to be! In the event of a "tip-over" or "slip," the bar absorbs the forces generated and distributes them gently. The sliding pad can support itself broadly against the valve cover in a serious situation. The close-to-engine routing of the bars ensures that ground clearance is not affected. The Touratech Engine Crash Bar "Street" is an effective combination of 25 mm thick electropolished stainless steel tubing and extremely durable plastic elements. In short: - effective protection for the cylinder and valve cover - efficient combination of electropolished stainless steel tubing and fiberglass-reinforced plastic sliding pads - lightweight, safe, and easy to install By reducing the lengths of the tubes, the weight has been reduced by almost 50%! (Weight compared to engine crash bar 035-5160)

Whether on-road or off-road, BMW has once again improved the true all-rounder with the R1300GS. However, the protection of the engine can still be individually optimized. With the Touratech Engine Guard Expedition, the heart of the machine is effectively protected, no matter where the journey leads.   Professional protection for engine and exhaust header. The Touratech Engine Guard "Expedition" offers optimal protection for your motorcycle. Dirt or stones kicked up by the front wheel do not reach the engine and header. Unpleasant damages, such as dents in the header or even holes in the engine block, are effectively avoided by the Touratech Engine Guard. For maximum stability, the multiple recessed contours in the 4 mm thick aluminum base plate play a key role. Additionally, the force of an impact is widely distributed thanks to the extra 3 mm stainless steel mounting plate on the engine. The ground clearance is not noticeably restricted. Thus, the Touratech Engine Guard *Expedition* is one of the most robust on the market.   Furthermore, plastic rails at the lower part of the base plate ensure that the already recessed screw heads are completely covered. Almost incidentally, they also prevent dirt from settling. This makes it easy to disassemble the engine guard even after heavy off-road use. Last but not least, the combination of a continuous underside and fiberglass-reinforced plastic rails facilitates the "sliding over" of stones, rocks, or tree stumps. A product that meets the highest technical demands and is visually an absolute highlight!   Details: - made from 4mm thick aluminum reinforced with 3mm thick stainless steel - best protection for engine and header - plastic rails facilitate the "sliding over" of stones, rocks, or tree stumps. - ground clearance is hardly affected - designed for optimal force distribution - easy to install - complete mounting material included in the set - detailed installation instructions   All in all, the large Touratech Engine Guard for the BMW R 1300 GS is a product that meets the highest technical demands and is visually an absolute "highlight"!