Verstärkungsstrebe Edelstahl für Original BMW Motorschutzbügel BMW R1200GS LC bis 2016

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts." Scratched valve covers or even holes in them are a thing of the past.Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with original BMW engine protection bars- made of 3mm thick silver anodized aluminum- easy and quick to installDelivery includes:Cylinder protection right + left, mounting materials, installation instructionsTo combine with Touratech crash bars, please order 045-5130!

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick black anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5133!

BMW R1200GS LC Cylinder protection to black with combi original BMW engine guards BMW R1200GS from 2013 / BMW R1200GS Adventure from 2014 item Description  Easy to assemble + low weight + high protection to these challenges we have set ourselves and a cylinder protection develops all these criteria are met! Made from 3mm thick aluminum and attached to the designated points of the Touratech holding cylinder guard for the water-cooled R1200GS "Umfallern" as well as stronger was "strikes". Scratched valve cover or even holes in it belong to the past. Tested among others in Madagascar, the protection of its performance reliably demonstrated gestellt.Ein "must" for any boxer engine with its widely spread cylinders!  - can be used with original BMW engine guard werden- mounted from 3mm thick black anodized aluminum and easy to install in delivery quickly: Cylinder protection right + left, mounting hardware, installation instructions

Easy to install + lightweight + high protectionWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick silver anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5132!

Even better protection for adventure-seekers and their Adventure-GS. The Touratech crash bar extension made of stainless steel provides assistance when the original crash bar of the R 1200 GS Adventure is no longer sufficient. And that can happen faster than one would like. Specifically, when the motorcycle tips over beyond the crash bar, potentially damaging fairing parts or even the sensitive aluminum tank. This can not only be costly but, in the worst case, abruptly end a beautiful journey. The crash bar extension made of robust, electropolished stainless steel is easy to maintain and resistant to rust. The clever four-point bolting distributes forces occurring during a fall or impact across the frame, causing minimal damage. Even deep scratches can be easily polished out.Details:- precisely matched in design, color, and material to the original crash bar- bolts onto the original BMW engine protection bar- main mounting points are positioned to distribute forces across the frame- additional profiled stainless steel plate for increased stability and added safety- better protects the cylinder head and sensitive aluminum tank from damage - made of electropolished stainless steel, thus resistant to rust- even deep scratches can be easily polished out- unrestricted knee and leg freedom- proven, tested, and reliable in tough travel conditions- produced in-house and "Made in Germany"Note: Not compatible with the stainless steel reinforcement strut for the original BMW engine protection bar for BMW R1200GS from 2013/ BMW R1200GS Adventure from 2014 (01-045-5164-0)Additional information on mounting: The Touratech crash bar extension is bolted at two points to the main frame of the vehicle and the original crash bar to better distribute the forces during a fall or impact and protect the vehicle from serious damage. Additional stability of the crash bar extension is achieved through two more mounting points on the crash bar. All necessary parts for installation are included. No special tools required.

Due to the installed boxer engine of the R1200GS, the headers are positioned far outside, completely exposed and unprotected, unlike other motorcycles. When riding over rough terrain, there is a significant risk of scraping or getting caught on the headers, resulting in dents, scratches, or in the worst case, holes. We have the solution: The heat shield from Touratech offers optimal protection for the headers. A sensible and affordable accessory that often pays for itself after the first use. This heat shield is made from laser-cut stainless steel. The design fits perfectly into the overall look of the new R1200GS. Very simple, quick, and secure attachment.

The Touratech crash bar extension protects the sensitive radiator, the fairing, and even the tank of the new water-cooled boxer!BMW has installed the water radiators on the R1200GS as closely as possible, but unfortunately, the lower corners still protrude significantly. Just one unfortunate tip-over is enough, and the journey is over for the time being. Expensive repairs are the result. Scratches on the fairing parts, which would constantly annoy you, won't occur with the Touratech crash bar extension!Made exclusively from robust electropolished stainless steel, the extension is resistant to rust. Even deeper scratches lose their terror and can simply be sanded down.Despite the impressive pipe diameters, the crash bar is mounted as close as possible to and symmetrically to the vehicle axis. It has virtually no impact on lean angles or ground clearance. The crash bar extension is thus visually integrated as part of the motorcycle.In short:- in the event of a fall or when the machine tips over, the forces generated are absorbed and redirected through the engine crash bar to designated areas without causing significant damage - protects the rider and motorcycle with generously sized cross-sections even in the event of a frontal impact- stable multi-point attachment through high-strength clamping on the engine protection bar and bolting to the front of the vehicle - fits in conjunction with the Touratech crash bar (045-5160) and the original BMW crash bar.- gives the R1200GS a touch of "ADVENTURE"- for all BMW R1200GS models from 2013 onwardsThe protection bar is both an aesthetic enhancement and an absolutely sensible investment to protect your R1200GS from expensive damage. The ideal complement to the existing Touratech engine protection bar (045-5160)!With the Touratech adapter kit (045-5200), you can mount the original BMW LED auxiliary headlights directly onto the Touratech crash bar extension (045-5161 and 045-5163) of the R1200GS from 2013 onwards.

The Touratech cylinder protection made of stainless steel is the ideal complement to the original BMW engine protection bar, as it closes the gap between the pipes.This prevents sharp stones, for example, from finding their way to the valve cover and damaging it.Made from 2mm thick stainless steel and reinforced with ridges and curves, the stainless steel cylinder protection withstands even the toughest demands. Additionally, it is optimized with plastic grinding pads.The simple installation is done via a special clamping mechanism.A technically sensible accessory and a true visual "highlight" for your R1200GS/GSA!

Egal wie die GS fällt, der Touratech Motorsturzbügel ist da, wo er gebraucht wird. Der umfassendste Rundumschutz den es für Boxermotoren je gab!Ein "Käfig" aus 25mm starken, 2mm dicken Edelstahlrohren umschließt die Zylinder vollständig. Auftretende Kräfte werden sicher abgeleitet und durch effektive Verteilung schonend abgebaut. Zahlreiche Montagepunkte, Sollbiegestellen und die zentrale Querstrebe gewährleisten nicht nur für die Zylinder, sondern auch für Rahmen und Motor ihrer R1200GS sicheren Schutz.Trotz der beeindruckenden Rohrdurchmesser ist der Sturzbügel so nah wie möglich an und symmetrisch zur Fahrzeugachse montiert. Er hat nahezu keinen Einfluss auf die Schräglagen- oder Bodenfreiheit.Er fügt sich perfekt in die Optik der R1200GS ein, rundet das Gesamtbild ab, gehört einfach dazu!Hergestellt ausschließlich aus robustem elektropoliertem Edelstahl, ist der Sturzbügel unempfindlich gegenüber Rost. Selbst tiefere Kratzer verlieren ihren Schrecken und können einfach verschliffen werden.Die Montagepunkte sind perfekt auf die R1200GS abgestimmt! Vollständiges Montagematerial selbstverständlich im Lieferumfang.TIPP für den perfekten Rundumschutz: Die ideale Ergänzung zum Sturzbügel ist unsere Sturzbügelerweiterung für die R1200GS (045-5161).Kurz:- vollständiger Schutz der Zylinder, auch nach hinten und nach oben- sicherer Abbau auftretender Kräfte, ohne Rahmen und Motor zu schädigen- keine Einschränkungen der Schräglagen- oder Bodenfreiheit- aus 25/2 mm Edelstahlrohren- Hergestellt in Deutschland- verwendbar zusammen mit Touratech Sturzbügelerweiterung (045-5161) und Zylinderschutz (045-5130)Auch geeignet für Sondermodell R1200GS "Rallye" mit Sonderausstattung "Sportfahrwerk".

No matter how the GS falls, the Touratech engine crash bar is there where it is needed. The most comprehensive all-around protection ever available for boxer engines!A "cage" made of 25mm thick, 2mm stainless steel pipes completely encloses the cylinders. Forces that occur are safely redirected and gently dissipated through effective distribution. Numerous mounting points, predetermined bending points, and the central cross brace ensure not only protection for the cylinders but also for the frame and engine of your R1200GS.Despite the impressive pipe diameters, the crash bar is mounted as close as possible to and symmetrically to the vehicle axis. It has virtually no impact on lean angle or ground clearance.It integrates perfectly into the look of the R1200GS, completing the overall appearance; it simply belongs!Made exclusively from robust electropolished stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their menace and can be easily sanded down.The mounting points are perfectly tailored to the R1200GS! Complete mounting materials are, of course, included in the delivery.TIP for perfect all-around protection: The ideal complement to the crash bar is our crash bar extension for the R1200GS (045-5161).In short:- complete protection of the cylinders, including rear and top- safe dissipation of occurring forces without damaging the frame and engine- no restrictions on lean angle or ground clearance- made from 25/2 mm stainless steel pipes- Made in Germany- usable together with Touratech crash bar extension (045-5161) and cylinder protection (045-5130)Also suitable for the special model R1200GS "Rallye" with special equipment "Sport suspension".