A more comfortable, one-piece seat is also beneficial for the Transalp! Because even with this vehicle, long stages should not be a torment, but a pleasure on this unique machine.For this reason, we also offer the one-piece seat with all improvements such as optimized foam and modified contour as a comfortable, long-distance alternative to the rather uncomfortable stock seats.The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation and provides a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that will excite!The high-quality seat is delivered completely ready for installation and without any time loss due to reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts:- anatomically adapted contour developed in extensive riding tests in Germany- no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic, sweat-resistant cover material in "sand look" with sealed seams- hollow groove (depression) in the center of the seat for tailbone relief- different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- highest quality materials and workmanship- made in Germany- thanks to the Fresh Touch surface coating, up to 10°C temperature difference compared to the original seat coverDue to the higher padding with high-quality foams, the Touratech seats do not sag even on long tours. Thanks to an optimized geometry, the step arch is reduced, and you can still comfortably reach the ground with your feet.Height: 55 / 57 / 59 cmHeight of Transalp original seat: 54 cm(Height specifications without guarantee!) Explanations for measuring seat height can be found under "Downloads"Please use a paint protection film in the tank area, e.g., 01-101-0100-0

Comfort Seat - Comfort can also be beautiful!Elegant seat for the R1200GS/R1200GS Adventure, which can be used modularly.These seats are made from the highest quality materials and are specifically tailored to meet ergonomic requirements for long distances. Our seat largely avoids pressure points on the thigh caused by improper padding or poorly placed seams. The high-strength padding effectively protects the buttocks. "Sinking in" is not possible even after many kilometers. Furthermore, the contours of the seat are shaped to provide you with nearly perfect seating comfort. The high-quality cover fabric made of synthetic leather prevents the outlines from showing through due to the tight upholstery and the accumulation of rainwater on the seats.The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation, providing a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that will excite you!In the passenger seat variant (044-1020), it is particularly noteworthy that sliding forward during braking is largely excluded, which further perfects passenger comfort. With this seat combination, you can tackle even the longest distances comfortably, whether alone or with a passenger.You can order the passenger and rider seats separately; both seats can be easily mounted in combination with the original counterparts as well as together.The seat is waterproofRider Seat extra low R1200GS/ADV Height: 48 cmOriginal height R1200GS: 52/54 cm- Explanations for measuring seat height can be found under "Additional Information"- Thanks to the Fresh Touch surface coating, there is a temperature difference of up to 10°C compared to the original seat cover.

There’s no better way to sit!For the highest demands, we offer the proven comfort seat in our patented, breathable version!The seat construction is based on an open-pore foam core, on which a spacer fabric is applied in the seating area to allow air exchange through the highly durable, elastic, and waterproof textile cover.The result of this elaborate construction is overwhelming and ensures the highest riding comfort not only on long distances but also at high outside temperatures and extreme humidity. However, there are no disadvantages or limitations in normal everyday use. On the contrary, for example, the formation of wrinkles or creases in the undergarments is avoided from the very first kilometer due to the air exchange!The ultimate seat for rider and passenger!The high-quality seat is delivered completely ready for installation and without any time loss from reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts:- anatomically adapted contour developed in extensive riding tests in Germany- no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic cover material with sealed seams- hollow groove (depression) in the center of the seat for tailbone relief- different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- the standard adjustment of the seat height remains intact- highest quality materials and workmanship- seats can be used modularly, fitting together with the original passenger or rider seat- Explanations for measuring seat height can be found under "Additional Information"Our rider and passenger seats can only be used together on the Adventure!Height: 55/56.5 cmOriginal height R1200GS: 52/53.5 cmOriginal height BMW R1200GS Adventure from 2014: 54/55.5 cm

Comfort Seat - Comfort can also be beautiful!Elegant seat for the R1200GS, which can be used modularly.These seats are made from the highest quality materials and are specifically tailored to meet ergonomic requirements for long distances. Our seat largely avoids pressure points on the thigh caused by improper padding or poorly placed seams. The high-strength padding effectively protects the buttocks. "Sinking in" is not possible even after many kilometers. Furthermore, the contours of the seat are shaped to provide you with nearly perfect seating comfort. The high-quality cover fabric made of synthetic leather prevents the outlines from showing through due to the tight upholstery and the accumulation of rainwater on the seats.The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation, providing a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that will excite you!In the variant for the passenger seat (044-1020), it is particularly noteworthy that sliding forward during braking is largely excluded, which further perfects passenger comfort. With this seat combination, you can comfortably tackle even the longest distances, whether alone or with a passenger.You can order the passenger and rider seats separately; both seats can be easily mounted in combination with the original counterparts as well as together.The seat is waterproofHeight: 50 / 52 cm; 51 / 53 cm; 54 / 56 cmOriginal height R1200GS: 52/54 cm- Explanations for measuring seat height can be found under "Additional Information"- Thanks to the Fresh Touch surface coating, there is a temperature difference of up to 10°C compared to the original seat cover

Honda's interpretation of a large travel enduro already provides almost untroubled long-distance comfort for both rider and passenger right from the factory. However, the seat is a point of criticism, as it causes pain and pressure points on longer journeys due to the use of too soft foam and a suboptimal contour. Our comfort seat eliminates these weaknesses with optimized seating surfaces, high-quality foam in three different heights, and a slip-resistant, sweat-resistant cover material in "sand look." Thus, the Africa Twin becomes the perfect travel companion for both rider and passenger! The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation, providing a more pleasant and cooler feeling when sitting on a motorcycle parked in the sun. An additional, exclusive comfort gain that creates enthusiasm!The high-quality seat is delivered completely ready for installation and without any time loss from reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts: - anatomically adapted contour developed in extensive riding tests in Germany - no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic, sweat-resistant cover material with sealed seams- hollow groove in the center of the seat for tailbone relief- special contour of the passenger seat surface provides secure grip during braking and acceleration - different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- the seat is waterproof- highest quality materials and workmanship in top quality- made in Germany- thanks to the Fresh Touch surface coating, up to 10°C temperature difference compared to the original seat coverExplanations for measuring seat height can be found under "Additional Information".Height: 50/52 cmOriginal height CRF 1000L: 52/54 cm

You will feel the difference!The GS models of the first 4V generation have brought their owners much joy over countless kilometers, but gradually, noticeable discomfort creeps in during longer rides. You become tense, experience unexplained back pain, and have issues in the knee and tailbone areas. A common reason for this is worn, aged, or sagging foam in the original seats. The initially positive attributes such as seating comfort, elasticity, optimal hardness, and rider posture diminish, and it is high time for a new seat for the rider and passenger to restore the joy of riding! We offer for the R850GS, R1100GS, and R1150GS (not Adventure) the "better" seat: anatomically optimized, with a high-strength foam core in various heights and a non-slip, bi-elastic, and waterproof cover in "sand look".Note: not for R1150GS AdventureThe comfort seats surpass even new, original seats with their outstanding properties and give the rider back the joy of their "GS"!The seat is waterproofThe high-quality seat is delivered completely ready for installation and without any delay from reupholstering; no modifications to the vehicle are necessary, and you can keep your original seat.Facts:- anatomically adapted contour developed in extensive riding tests in Germany- no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic, sweat-resistant cover material in "sand look" with sealed seams- hollow groove (depression) in the center of the seat for tailbone relief- special contour of the passenger seat surface provides secure hold during braking and acceleration- different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- highest quality materials and workmanship- seats can be used modularly, fitting together with the original passenger or rider seat- made in Germany- the standard seat height adjustment remains intact- the rubber buffers on the underside of the seat must be transferred from the original seat or can be ordered from your authorized dealer- the locking mechanism of the original seat must be modified

Yamaha's interpretation of a large adventure touring bike already provides almost untroubled long-distance comfort for both rider and passenger right from the factory. However, the seat is a point of criticism, as it can cause pain and pressure points on longer journeys due to the use of too soft foam and a suboptimal contour. Our comfort seat eliminates these weaknesses with optimized seating surfaces, high-quality foam in three different heights, and a slip-resistant, sweat-resistant cover material in "sand look." Thus, the Super Ténéré becomes the perfect travel companion for both rider and passenger! The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation, providing a more pleasant and cooler feeling when sitting on a motorcycle parked in the sun. An additional, exclusive comfort gain that creates enthusiasm!The high-quality seat is delivered completely ready for installation without any time loss from reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts: - anatomically adapted contour developed through extensive riding tests in Germany - no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic, sweat-resistant cover material with sealed seams- hollow groove in the center of the seat for tailbone relief- special contour of the passenger seat surface provides secure hold during braking and acceleration - different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- the seat is 100% waterproof- the rubber buffers on the underside of the seat must be transferred from the original seat or can be ordered from your authorized dealer- highest quality materials and workmanship- made in Germany- thanks to the Fresh Touch surface coating, up to 10°C temperature difference compared to the original seat coverHeight: 54/56 cmExplanations for measuring seat height can be found under "Additional Information".

You want to take advantage of the original Touratech Fresh Touch seats for your motorcycle, but we don't have your model in our program?No problem: With our Fresh Touch seat cover, you can have your seat reupholstered by an upholsterer of your choice or do it yourself.The seat cover measures 110 x 69 cm and is universally applicable! Thanks to the Fresh Touch surface coating, you can achieve a temperature difference of up to 10°C compared to the original seat cover.