The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

Our headlight guard has proven itself thousands of times over the years. Even larger debris cannot harm the headlight of your machine!With quick release! This allows you to clip on or remove the headlight guard as needed. Only the side struts are securely and firmly bolted.The Makrolon disc is nearly indestructible and shatterproof!Of course, everything necessary for installation is included in the delivery.- Super suitable for full LED headlights with daytime running lights, as it does not affect cooling.- Suitable for all headlight types of this vehicle model.The headlight guard has been developed for off-road use and is not permitted under the scope of the German Road Traffic Regulations (StVO). Please check your national regulations!

The cockpit cover 2 encloses the instrument cluster of the R1200GS. Additionally, two sockets with a fuse unit are integrated. This allows devices such as mobile phones or GPS units to be plugged directly into the cockpit, eliminating the need for the connection cable to be routed around the motorcycle. Thanks to the secured direct connection, charging is also possible with the ignition turned off, which is otherwise a problem with the R1200GS. This cover is made from black powder-coated aluminum combined with stainless steel fasteners. Everything fits perfectly; the unit can be mounted either alone or together with cockpit cover 1 (item number 044-0552).- due to design reasons, it is not compatible with internally mounted GPS brackets (e.g., Touratech 040-0663 / 040-0667 or BMW)

Combination of stainless steel and anodized aluminum to effectively protect the cylinder heads in the event of a fall or tip-over. Also effectively prevents the valve cover from shifting during falls.Scope of delivery:Cylinder protection left pre-assembledCylinder protection right pre-assembledMounting materialsInstallation instructions

The plastic shell is slid over the main bracket and clamped at the connection of the two aluminum components, ensuring a precise and secure fit.Those who need even more weather protection can additionally install the separately available "Extension" spoiler.Of course, the Defensa Expedition can be easily converted back to Pure.

Additional hand protection for our DEFENSA Expedition handguards.Very useful and comfortable in rain, snow, hail, and cold.Easy installation with included mounting parts.The spoilers are made of lightweight plastic.- Protector and spoiler colors can be freely combinedScope of delivery:Spoilers left and right + mounting material

With this bracket, you can combine the robust Touratech engine guard with the original Honda crash bar.

The technical design of the Lumbo-X has been developed with sports orthopedic considerations in mind. Since the Lumbo-X is made from breathable mesh material, it offers up to 80% better moisture exchange than conventional materials. The integrated stabilization straps are individually adjustable, ensuring a perfect fit and good support in any situation. The new Ortho-Tech protection system has been designed for shock absorption in the event of external force and for protection of the lumbar spine (lower back area). The link chain follows the body's forward movement but prevents overstretching of the spine. This combines maximum freedom of movement with high protective effectiveness.Back height: 24 cmWaist circumference: S - 83 cmWaist circumference: M - 93 cmWaist circumference: L - 103 cmWaist circumference: XL - 113 cmWaist circumference: XXL - 123 cmWaist circumference: 3XL + 123 cm

This is not an ordinary protector jacket; this is Nucleus. It provides a high level of CE-certified protection, looks understated and elegant, and can be worn as a standalone jacket or serve as a tactical protective base under any jacket.Motorcycle clothing distilled to its essenceWith its construction of abrasion-resistant and comfortable 3D Air-Mesh and polyester stretch, the slim-fit Nucleus motorcycle protective clothing brings protection back to its core. Key features include SEEFLEX and SEESOFT CE-Level 2 impact protectors for shoulders and elbows, as well as for the back area. A two-part SEESOFT CE-Level 1 protector secures the chest area.Comfort and style: guaranteedThe low-cut collar and the single chest pocket emphasize the intention to wear Nucleus as a base layer and combine it with a garment of your choice. Whether it’s an off-road jacket from the DIRT Series, your favorite casual jacket, or even a sweater – with Nucleus, you always look good and feel comfortable.

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts." Scratched valve covers or even holes in them are a thing of the past.Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with original BMW engine protection bars- made of 3mm thick silver anodized aluminum- easy and quick to installDelivery includes:Cylinder protection right + left, mounting materials, installation instructionsTo combine with Touratech crash bars, please order 045-5130!

Perfect protection and value retention for your GS! Our side covers fill two unsightly gaps in the rear area of the R1200GS and are not only visually appealing and perfectly shaped, but also practical!Experience over many years has shown that protecting the painted frame tubes in the boot area is absolutely necessary.Side Covers:The covers made from a mix of plastic and stainless steel are easy to install and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side covers not only protect against splash water on the road and kicked-up dirt during off-road rides, but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side cover is connected by an anodized, high-quality laser-engraved stainless steel part to form a perfect and easily removable unit. This also reduces the risk of getting caught with your boot on the vehicle frame, preventing any equipment from unintentionally snagging on the vehicle.Frame Protection:Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use can quickly make the frame unsightly as the paint wears off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Scope of delivery:- Side covers, left and right (with socket preparation) - Small frame protection, left and right- Mounting materialsColor: black

With the Touratech reinforcement strut, the BMW engine protection bar of the water-cooled R1200GS Adventure becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Developed for BMW R1200GS-Adventure 2014 - 2016 with BMW engine protection bar (series), combined with Touratech fairing crash bar extension 045-5165.Set for both sides!Does not fit the special model "Adventure Triple Black".

The AMP SUPERSEAL 1.5 SERIES connectors have been developed to meet the higher technical demands for connectors in terms of waterproofing and reliability. The AMP SUPERSEAL 1.5 SERIES connectors comply with the regulations of IEC 529 and DIN 40050 IP 67, making them suitable for use in the automotive industry, agriculture, and mechanical engineering. This system is also suitable for use with sensors. Features:waterproof up to IP 67max. 14Amax. 24V DC-40°C to +125°CInsulation diameter 1.2-3.3mm FLRHousing, PA 6.6 glass fiber reinforced, blackSecondary contact retention, PA 6.6 glass fiber reinforced, redUL certifiedScope of delivery:1x AMP Superseal socket housing 2-pole1x AMP Superseal pin housing 2-pole1x AMP Superseal blind plug 2-pole3x AMP Superseal socket contact 0.75-1.5mm²3x AMP Superseal pin contact 0.75-1.5mm²4x AMP Superseal single wire seal yellow for outer diameter 1.8-2.4mm4x AMP Superseal single wire seal green for outer diameter 1.4-1.7mm

The extremely durable paint protection film from 3M offers optimal protection against scratches on your paint. The film is particularly suitable in combination with our tank bags and tail bags to protect paint areas where the luggage variant rests directly and could rub. However, sensitive areas where the motorcycle suit rubs or stone chips occur can also be protected with this film. The film is transparent and universally applicable, and it can be cut to size as needed.Features-transparent-universally applicable-excellent resistance to UV radiation, temperature stress, chemicals, and solvents -easy installation Size: 20 x 30 cmFilm thickness: 0.1 mm

The Touratech tank pad for self-application is not only a visual highlight but also effectively protects the surface of the tank against dirt and scratches.The 3D design also offers a lot functionally. The PVC film has been reinforced in a special process to make the design and protection more durable. The sticker is resistant to gasoline. Even an extensive motorcycle wash cannot harm it.- 2 mm thick- approx. 20 cm x 10 cm- good UV resistance- weatherproof- guaranteed no bubbles- fits almost any tankProtect your tank now from scratches caused by belt buckles, dirt under the tank bag, etc. with the Touratech tank pad!

Exceptionally comfortable back protection for ZEGA Evo / ZEGA Pro top cases.A specially developed closed-pore foam ensures lasting comfort. The passenger will be thrilled!Custom cutouts on the backrest allow for easy installation on the back of the case.Also compatible with the original BMW aluminum top case as well as the Ducati Multistrada aluminum top case.Note: Leaning against the top case may exceed the maximum load of the top case and top case carrier.

BMW has been using water cooling for new boxer engines since 2013. This allows for optimal performance combined with high durability. Technically implemented perfectly, the system has only one weak point: the sensitive water cooler.The Touratech radiator guard protects the vulnerable fins of the cooler from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey becomes much safer with minimal effort!Visually understated yet unmistakably in the Touratech style, the radiator guard made of laser-cut, electropolished stainless steel integrates perfectly into the design of the GS.Material: electropolished stainless steel blackColor: silverScope of delivery: 2 parts (left and right)For tough off-road use, the radiator guard can additionally be secured with the included cable ties.Note: Covering the radiator can cause temperature problems for the engine under unfavorable conditions, at high outside temperatures, and at full load. Please pay attention to your water temperature gauge.

The practical adhesive pad to protect the tank from scratches.Length: 16.5 cm Width: maximum 9 cm, minimum 5 cmColor: black

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1200GS. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing the ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and resilient PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

Compatible with our chain guard (402-5045), we have developed an effective lower protection made from the same aluminum/stainless steel material combination. Especially off-road, it prevents branches and other objects from knocking the chain off the sprocket.The chain guard fin is sturdier and significantly more attractive than the original plastic part!The installation of the chain guard can be done easily and quickly using existing mounting points.

Extremely robust protection for your BMW G650GS / F650GSEquipped with the protection bars, even more significant falls lose their fear, and you are spared from expensive repairs.- precisely manufactured for the G650GS- quick and easy to install- made from high-quality stainless steel

Even minor falls can significantly damage the tank and fairing of your V-Strom.The costs for the tank and fairing are immense. Efficiently minimize this risk with the extremely solid Touratech tank crash bars.

Crash bars are among the most important aftermarket parts that you should consider for your motorcycle!To protect the heart of your BMW, we use solid 25mm stainless steel tubing with a wall thickness of 25mm. Additionally, the sophisticated design of the mounting elements allows for easy and hassle-free installation of the one-piece bar at the designated mounting points provided by BMW.In the "event of a fall," energy is efficiently dissipated, and the forces acting on it are optimally distributed.The electropolished surface of the stainless steel is extremely resistant; even deep scratches lose their impact, and rust is a thing of the past.Together with the Touratech crash bar extension (048-51xx), it’s the perfect combination for a long and fulfilling motorcycle life!- compatible with the Touratech crash bar extension 048-51xx- easy and quick to install- made of black electropolished stainless steel- compatible with the original BMW engine guard "large aluminum"Note: BMW F800GS for all model years!

The Touratech engine crash bar provides optimal protection for the important side covers of the engine. Its slim design allows for riding challenging single trails off-road, while it does not restrict lean angles on the road in any way. Made from durable stainless steel, the engine crash bar shines with a noble electropolished/black surface. Its design complements the sporty and aggressive lines of the Honda CRF1000L. The crash bar is made from high-quality, electropolished stainless steel and expands the range of use for your adventure touring bike. The two-part crash bar has been positioned as closely as possible to the vehicle to harmoniously integrate it into the existing vehicle design. Its special construction ensures optimal force distribution. The crash bar is easy to install, resistant to rust, and easy to maintain. Perfect for the Honda CRF1000L. Together with the Touratech crash bar fairing for your Africa Twin, the fear of "tipping over" is finally a thing of the past!Note: without DCTNot compatible with the equipment variant "Decor frame and engine protection" (Honda part number: 08P70-MKK-D00)!