Touratech Suspension Steering Damper "CSC" for BMW R1250GS + Adventure R1200GS LC
Product number:
1021-01-045-5832-0
Product information "Touratech Suspension Steering Damper "CSC" for BMW R1250GS + Adventure R1200GS LC"
The Touratech Suspension *CSC* Steering Damper is specially developed for the BMW R1200GS/R1250GS Adventure (LC) from 2014 and is adjustable. The riding stability of your BMW R1200GS/R1250GS Adventure (LC) is effectively optimized and can be individually and finely adjusted over 24 clicks. Whether on trails and touring with high loads or during cornering, you are always on the road with your personal setup. The original BMW steering damper is not adjustable. We have found that the linear Touratech Suspension *CSC* (Constant Safety Control) steering damper, with its permanently supportive effect, opens up completely new riding dimensions.
What the Touratech Suspension *CSC* Steering Damper does:
- No more strong steering input when navigating slow corners with high loads.
- Minimization of disturbances transmitted to the handlebars by the rider.
- Example: Wind hitting the motorcycle clothing and/or disturbances from a truck or van ahead.
- Minimization of disturbances caused by ruts on highways, country roads, and trails.
- The smaller front wheel with knobby tires during trail or sand riding is noticeably stabilized.
- Less fatigue on long distances due to permanently higher riding stability.
Your motorcycle can be significantly more stable, less fatiguing, and safer with the *CSC* steering damper.
Additional features:
- The Touratech Suspension CSC steering damper fits the mounting points
of the BMW stock steering damper.
- Damping individually and finely adjustable over 24 clicks
- The Touratech CSC steering damper is delivered complete with the appropriate mounting kit.
- Made from high-quality aircraft aluminum 7075 CNC machined.
- Optimal response behavior for maximum safety
- Elegant Touratech design and 68 mm stroke
- With ABE
Scope of delivery:
- Touratech Suspension *CSC* Steering Damper
- Appropriate mounting kit for the
BMW R1200GS (LC) from 2014
BMW R1200GS (LC) Rallye
BMW R1200GS Adventure (LC) from 2014
BMW R1250GS from 2018
BMW R1250GS Rallye from 2018
BMW R1250GS Adventure from 2019
- Installation instructions
What the Touratech Suspension *CSC* Steering Damper does:
- No more strong steering input when navigating slow corners with high loads.
- Minimization of disturbances transmitted to the handlebars by the rider.
- Example: Wind hitting the motorcycle clothing and/or disturbances from a truck or van ahead.
- Minimization of disturbances caused by ruts on highways, country roads, and trails.
- The smaller front wheel with knobby tires during trail or sand riding is noticeably stabilized.
- Less fatigue on long distances due to permanently higher riding stability.
Your motorcycle can be significantly more stable, less fatiguing, and safer with the *CSC* steering damper.
Additional features:
- The Touratech Suspension CSC steering damper fits the mounting points
of the BMW stock steering damper.
- Damping individually and finely adjustable over 24 clicks
- The Touratech CSC steering damper is delivered complete with the appropriate mounting kit.
- Made from high-quality aircraft aluminum 7075 CNC machined.
- Optimal response behavior for maximum safety
- Elegant Touratech design and 68 mm stroke
- With ABE
Scope of delivery:
- Touratech Suspension *CSC* Steering Damper
- Appropriate mounting kit for the
BMW R1200GS (LC) from 2014
BMW R1200GS (LC) Rallye
BMW R1200GS Adventure (LC) from 2014
BMW R1250GS from 2018
BMW R1250GS Rallye from 2018
BMW R1250GS Adventure from 2019
- Installation instructions
Login
Accessory Items
BMW R1200 GS + Adv. LC Handlebar Riser 25mm Type 38 Handlebar Adapter R 1200 GS LC from 2013
€99.90*
Often, it's the little things that make the difference! This is also true for the Touratech handlebar riser for the BMW R1250GS/R1200GS.The 25 mm rise of the handlebars results in a more upright, significantly relaxed seating position. The adjustment range of the handlebar tilt is increased, which further enhances comfort.Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages, especially for taller riders.Overall, this leads to a noticeable increase in stamina and concentration. Long highway stretches lose their intimidation, and even fast and challenging sections off-road become easier to handle.The simple installation can be completed in just a few minutes. No longer cables or brake lines are necessary!Material: silver anodized aluminum
BMW R1200 GS + Adv. LC handlebar elevation 15mm type 36 handlebar adapter R 1200 GS LC from 2013
€99.90*
Often, it's the little things that make the difference! This is also true for the Touratech handlebar riser for the BMW R1250GS/R1200GS.The 15mm rise of the handlebars results in a more upright and significantly relaxed seating position. The adjustment range of the handlebar tilt is increased, which further enhances comfort.Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages, especially for taller riders.Overall, this leads to a noticeable increase in stamina and concentration. Long highway stretches lose their dread, and even fast and challenging sections off-road become easier to tackle.The simple installation can be completed in just a few minutes. No longer cables or brake lines are necessary!
Touratech Suspension Replacement Springs for BMW R1250GS Adventure LC factory low ESA 2018 - 2020
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS Adventure model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Similar Items
Touratech Suspension Replacement Springs for BMW R1200GS LC 2013 - 2018 Factory Low ESA
€219.00*
Progressive Springs for Fork and Shock Absorber for BMW R 1200 GS LC factory low ESA 2013 - 2018 These progressive replacement springs are perfectly matched to the shock absorbers of your motorcycle. The shock absorbers provide a better setup for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Replacement spring for original front shock absorber. - Replacement spring for original rear shock absorber. - including detailed installation instructions. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Replacement Springs for BMW R1250GS LC ESA 2018 - 2020
€219.00*
Progressive Springs for Fork and Shock Absorber for BMW R 1250 GS LC ESA 2018 - 2022 These progressive replacement springs are perfectly matched to the shock absorbers of your motorcycle. This results in better tuning for the demands of motorcycle travel. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Replacement spring for original front shock absorber. - Replacement spring for original rear shock absorber. - including detailed installation instructions. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Replacement Springs for BMW R1250GS LC Factory Low ESA 2018 - 2020
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. You will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.