Touratech Suspension Shock Absorber for Yamaha MT 09 Tracer from 2015 Type Level1/Explore
Product number:
1021-01-630-5860-0
Product information "Touratech Suspension Shock Absorber for Yamaha MT 09 Tracer from 2015 Type Level1/Explore"
More performance and comfort for your Yamaha MT 09 Tracer with the Touratech Suspension Shock Absorber Type Level1. Whether you're heading out for a twisty ride or a leisurely tour with friends, the large adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Level1 shock absorber in emulsion design can be adjusted for load adaptation to accommodate large travel luggage using an adjustment tool. The rebound adjustment allows for the necessary fine-tuning for any road condition and purpose. Whether it's highways, federal roads, small country roads, or a spirited, ambitious riding style.
The new suspension dimension for your Yamaha MT 09 Tracer.
Key points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha MT 09 Tracer.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
Features of the Touratech Suspension Level1 Shock Absorber:
=> The shock absorber housing is made of aluminum.
*** This results in the lowest possible weight.
=> It features low-friction special seals with an integrated Teflon support ring for low
*** wear and long service life of the shock absorbers.
=> Emulsion construction and finer response of the shock absorber.
=> Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability.
=> 38mm damping piston with special Touratech setup.
=> The shock eye features stable stainless steel bushings for the mounting screws.
*** This ensures a stable, play-free fit of the mounting screw even under maximum loads.
=> All components and parts are designed for intensive use in travel operations.
=> QR code on the shock absorber with individual shock absorber information.
*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.
*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings.
=> Fully serviceable. This ensures consistently high riding dynamics.
The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.
Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual
Do you have further questions? We are happy to advise you personally, please contact us
The new suspension dimension for your Yamaha MT 09 Tracer.
Key points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha MT 09 Tracer.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
Features of the Touratech Suspension Level1 Shock Absorber:
=> The shock absorber housing is made of aluminum.
*** This results in the lowest possible weight.
=> It features low-friction special seals with an integrated Teflon support ring for low
*** wear and long service life of the shock absorbers.
=> Emulsion construction and finer response of the shock absorber.
=> Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability.
=> 38mm damping piston with special Touratech setup.
=> The shock eye features stable stainless steel bushings for the mounting screws.
*** This ensures a stable, play-free fit of the mounting screw even under maximum loads.
=> All components and parts are designed for intensive use in travel operations.
=> QR code on the shock absorber with individual shock absorber information.
*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.
*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings.
=> Fully serviceable. This ensures consistently high riding dynamics.
The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.
Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual
Do you have further questions? We are happy to advise you personally, please contact us
Login
Similar Items
Touratech Suspension Replacement Springs for Yamaha MT-09 Tracer (USA: FJ-09) 2017 - 2020
€279.00*
Progressive Springs for Fork and Shock Absorber for Yamaha MT-09 Tracer (USA: FJ-09) 2017 - 2020 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Replacement Springs for Yamaha MT-09 Tracer GT 2018 - 2019
€279.00*
Progressive Springs for Fork and Shock Absorber for Yamaha MT-09 Tracer GT 2018 - 2019 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension E1 Shock Absorber for Yamaha MT-09 Tracer (USA: FJ-09)
€589.00*
Touratech Suspension E1 Mono Shock Absorber for Yamaha MT-09 Tracer (USA: FJ-09) - The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the respective motorcycle after intensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The Facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (Online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only an upgrade of the suspension from the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.
Touratech Suspension E1 Shock Absorber for Yamaha MT-09 Tracer GT 2018
€589.00*
Touratech Suspension E1 Mono Shock Absorber for Yamaha MT-09 Tracer GT 2018 - The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after intensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only an upgrade of the suspension from the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.