Skip to main content

Touratech Suspension Shock Absorber for Triumph Tiger 800 XC 2011-2015 Type Level 2

Product information "Touratech Suspension Shock Absorber for Triumph Tiger 800 XC 2011-2015 Type Level 2"

The Level2 shock absorber is the right choice for long-distance and touring use on the Triumph Tiger 800 XC. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.




Important points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Triumph Tiger 800 XC.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.

A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.



The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.

Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual

Do you have further questions? We are happy to advise you personally, please contact us

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessory Items

Touratech Progressive Fork Springs Triumph Tiger 800XC 2011-2014
These progressive fork springs are perfectly tuned to the requirements of the fork for the Triumph Tiger 800XC. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for Triumph Tiger 800 XC *2011-2015*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Triumph Tiger 800XC are:=> Touratech Suspension Shock Absorber *rear* for Triumph Tiger 800XC Type *Level2* 01-420-5882-0=> Touratech Suspension Shock Absorber *rear* for Triumph Tiger 800XC Type *Level High End* 01-420-5867-0=> When replacing only one component, optimal handling will not be achieved.Do you have further questions? We are happy to advise you personally, please contact usDelivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the inner tubes.

€169.00*

Similar Items

Touratech Suspension E1 Shock Absorber for Triumph TIGER 800 XC 2011 - 2014
Touratech Suspension E1 Mono Shock Absorber for Triumph TIGER 800 XC 2011 - 2014 The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the respective motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The Facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

€549.00*