Touratech Suspension Shock Absorber for Honda XRV750 Africa Twin from 1993 Type Level 1
Product number:
1021-01-058-0010-0
Product information "Touratech Suspension Shock Absorber for Honda XRV750 Africa Twin from 1993 Type Level 1"
This shock absorber is the right choice for the Honda XRV750 Africa Twin during normal touring operations. The shock absorber type offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design and finely adjustable damping allow for a more precise adjustment and balance than is possible with the series components of motorcycle manufacturers. The spring preload can be adjusted with a tool to accommodate the large travel luggage. The damping adjustment of this Level 1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.
Important points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Honda XRV750 Africa Twin.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> The suitable component for the front of the Honda XRV750 Africa Twin is:
=> Progressive fork springs, Hyperpro Honda XRV750 Africa Twin 01-040-7415-0
=> When replacing only one component, optimal riding behavior will not be achieved.
The equipment installed here with its adjustment options is sufficient if the suspension only needs to be adjusted for different loading conditions rarely.
Features of the Touratech Suspension Level 1 Shock Absorber:
=> The shock absorber housing is made of aluminum.
*** This results in the lowest possible weight.
=> Special, low-friction seals are installed.
*** This results in very low wear and a long lifespan of the shock absorber.
=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye.
*** This ensures a stable, play-free fit of the mounting screw even under the highest loads.
=> All components are designed for intensive use with heavy touring motorcycles.
=> The damping settings were developed based on the experiences and requirements of Touratech.
*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.
=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.
*** Finer response of the shock absorber.
*** High, precise damping performance even at very high damping frequencies (bad roads, tracks).
*** Better cooling of the shock absorber.
*** Minimal restrictions on the installation position of the shock absorber in the motorcycle.
=> QR code on the shock absorber with individual shock absorber information.
*** This allows easy retrieval of shock-specific information by scanning with a smartphone.
*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings.
If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.
Do you have further questions? We are happy to advise you personally, please contact us.
Important points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Honda XRV750 Africa Twin.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> The suitable component for the front of the Honda XRV750 Africa Twin is:
=> Progressive fork springs, Hyperpro Honda XRV750 Africa Twin 01-040-7415-0
=> When replacing only one component, optimal riding behavior will not be achieved.
The equipment installed here with its adjustment options is sufficient if the suspension only needs to be adjusted for different loading conditions rarely.
Features of the Touratech Suspension Level 1 Shock Absorber:
=> The shock absorber housing is made of aluminum.
*** This results in the lowest possible weight.
=> Special, low-friction seals are installed.
*** This results in very low wear and a long lifespan of the shock absorber.
=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye.
*** This ensures a stable, play-free fit of the mounting screw even under the highest loads.
=> All components are designed for intensive use with heavy touring motorcycles.
=> The damping settings were developed based on the experiences and requirements of Touratech.
*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.
=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.
*** Finer response of the shock absorber.
*** High, precise damping performance even at very high damping frequencies (bad roads, tracks).
*** Better cooling of the shock absorber.
*** Minimal restrictions on the installation position of the shock absorber in the motorcycle.
=> QR code on the shock absorber with individual shock absorber information.
*** This allows easy retrieval of shock-specific information by scanning with a smartphone.
*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings.
If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.
Do you have further questions? We are happy to advise you personally, please contact us.
Login
Similar Items
Touratech Suspension E1 Shock Absorber for Honda XRV 750 AFRICA TWIN 1993 -
€549.00*
Touratech Suspension E1 Mono Shock Absorber for Honda XRV 750 AFRICA TWIN 1993 - The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The Facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (Online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.