Skip to main content

Touratech Suspension Shock Absorber for Honda NC750X 2013-2015 Type Level2/ExploreHP

Product information "Touratech Suspension Shock Absorber for Honda NC750X 2013-2015 Type Level2/ExploreHP"

The Level 2 Shock Absorber is the right choice for long-distance and touring use for the Honda NC750X. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the stock components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by handwheel via the hydraulic preload adjustment. The damping settings of this Level 2 shock absorber allow for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.

Important points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Honda NC750X.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> In all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
Replacing only one component will not achieve optimal handling.

A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.



Features of the Touratech Suspension Level 2 Shock Absorber:
=> The shock absorber housing is made of aluminum, resulting in the lowest possible weight.
=> Special, low-friction seals are installed.
=> This results in very low wear and a long lifespan of the shock absorber.
=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye.
=> This ensures a stable, play-free fit of the mounting screw even under the highest loads.
=> All components are designed for intensive use with heavy touring motorcycles.
=> The damping settings were developed based on the experiences and requirements of Touratech.
=> The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.
=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.
=> Finer response of the shock absorber.
=> High, precise damping performance even at very high damping frequencies (bad roads, tracks).
=> Better cooling of the shock absorber. Minimal restrictions on the installation position of the shock absorber in the motorcycle.
=> Hydraulic high-end preload adjustment via a conveniently positioned handwheel.
=> QR code on the shock absorber with individual shock absorber information.
=> This allows for easy retrieval of shock-specific information by scanning with a smartphone.
=> Always accessible information on the basic settings of the shock absorber. Reset possible in case of incorrect settings.



The basic setup installed here is tuned for riders up to 100kg including travel luggage.
Adjustments for higher rider weights (more than 100kg) and/or predominantly passenger operation / with travel luggage are
possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.

Do you have further questions? We are happy to advise you personally, please contact us

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar Items

Touratech Suspension Replacement Springs for Honda NC750X 2016 - 2017
Progressive Springs for Fork and Shock Absorber for Honda NC 750 X 2016 - 2017 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€279.00*
Touratech Suspension Replacement Springs for Honda NC750X 2018 - 2020
Progressive Springs for Fork and Shock Absorber for Honda NC 750 X 2018 - 2020 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€279.00*
Touratech Suspension E1 Shock Absorber for Honda NC 750 X 2016 - 2019
Touratech Suspension E1 Mono Shock Absorber for Honda NC 750 X 2016 - 2019 The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The Facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only an upgrade of the suspension from the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

€549.00*