Touratech Suspension Shock Absorber for Honda CRF1000L from 2018 Type Level2 / PDS
Product number:
1021-01-402-5861-0
Product information "Touratech Suspension Shock Absorber for Honda CRF1000L from 2018 Type Level2 / PDS"
More performance and comfort for your Honda CRF1000L with the Touratech Suspension Shock Absorber Type Level2/PDS. Whether you're heading out for a twisty ride or a leisurely tour with friends, the large adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Level2/PDS shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. Even in this design the PDS is installed. A hydraulic bottoming protection that prevents bottoming out even under the most extreme trail conditions with full luggage. Mechanical overload of the shock absorber is prevented. The damping works depending on the terrain. In the majority of riding situations, the shock absorber responds finely and is tuned for comfort and energy efficiency.
Key points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Honda CRF1000L.
=> Parameters include: Vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.
Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual
Do you have further questions? We are happy to advise you personally, please contact us.
Key points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Honda CRF1000L.
=> Parameters include: Vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.
Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual
Do you have further questions? We are happy to advise you personally, please contact us.
Login
Similar Items
Touratech Suspension Replacement Springs for Honda CRF1000L (also ABS / DCT) 2018 - 2019
€279.00*
These progressive replacement springs achieve + 20mm more ground clearance, sportier response behavior, and higher reserves in the limit range with the original spring elements. The springs are perfectly tuned to the original shock absorber and fork of the Honda CRF1000L Africa Twin . Your motorcycle will have a cost-effective and optimized setup after the conversion, tailored to the demands of off-road motorcycle travel. Info: Fits only for *Honda CRF1000L Africa Twin 2018-2019 with original spring elements* Our recommendation: Have the conversion carried out by a specialist workshop. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension E1 Shock Absorber for Honda CRF 1000 L (also ABS / DCT) 2016 - 2017
€549.00*
Touratech Suspension E1 Mono Shock Absorber for Honda CRF 1000 L (also ABS / DCT) 2016 - 2017 The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber carried out by a specialist workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.