Touratech Suspension Replacement Springs for Triumph TIGER 900 1991 - 1997

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the Tiger 900 Rally / Rally Pro model. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “Tiger 900 Rally / Rally Pro (2020-2022)“Scope of delivery: - Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed document.

These progressive fork springs are perfectly tailored to the requirements of the fork for the Tiger 900 Rally. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for “Tiger 900 Rally / Rally Pro (2020-2022)”   For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable components for the rear of the Tiger 900 Rally in our accessory recommendations. Replacing only one component will not achieve optimal handling. Our recommendation: Have the conversion carried out by a professional workshop. Scope of delivery: - Replacement spring for the original fork. - Suitable fork oil. - Paste to improve the glide properties of the inner tubes. - Including detailed installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.  

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -20mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the Tiger 900 Rally / Rally Pro.  The suspension offers significantly improved responsiveness and higher safety in the limit range after the conversion. By replacing the springs front and rear, the balance of your motorcycle is preserved. Info: Fits only for “Tiger 900 Rally / Rally Pro (2020-2023)“ Scope of delivery:- Fork springs for the original fork.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a professional workshop.Info: Side stand and center stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

A lowering of the front with fork springs from Touratech Suspension. With this spring set, you achieve a sensible lowering of -20mm without compromising the riding characteristics. Of course, some ground clearance is lost. The continuously progressive springs are perfectly tuned to the Tiger 900 Rally / Rally Pro and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs.   Info: Fits only for “Tiger 900 Rally / Rally Pro (2020-2022)“   For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal riding behavior is not achieved. - You can find the matching components for your Tiger 900 Rally / Rally Pro in the accessories of this item. “Please scroll down”   Delivery includes: - Fork springs -20mm - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Installation instructions with setup information,   Our recommendation: Have the conversion carried out by a specialist workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.  

The Touratech Suspension Cartridge Kit Extreme is simply put a shock absorber for the fork and the absolute premium class in terms of suspension technology. The Closed Cartridge is installed in the original fork. This way, the fork bridge/handlebar mount, brakes, wheel guidance, and steering geometry remain fully intact. No additional modifications to the fork are required. This Close Cartridge is perfectly designed for touring and riding operations with frequently and significantly changing loads and riding conditions or extreme demands.   This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The spring preload, rebound, and compression damping are fully adjustable from the top. The damping oil is contained in a closed cartridge, allowing for precise dosing of the oil quantity. This results in the Close Cartridge offering a significantly finer and more pleasant response behavior of the fork. The very finely adjustable damping allows for an effective, precise, and personalized suspension setup for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or a spirited, ambitious riding style. Should exceptionally severe road conditions affect the front wheel, the integrated "Hydraulic Endstop" prevents mechanical bottoming out of the fork.   You will experience a completely new riding sensation with your motorcycle.   The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. Please use our suspension check form and send us the completed document.   Scope of delivery: - 2x Closed Cartridge - with damping adjustment, (1x) rebound, (1x) compression. - with spring preload adjustment (using a 22mm wrench) - Adjustment tool for damping - Installation tool for the cap. - Ready to install and filled with pre-assembled fork spring. - 1 liter of oil (for fork installation) - User manual and installation instructions - 2x fork protection stickers.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555

The Level2 shock absorber is the right choice for long-distance and touring use on the Triumph Tiger 900 Rallye Pro. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.   Key points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the Triumph Tiger 900 Rallye Pro. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.   A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs by us. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

The Touratech Suspension Extreme Shock Absorber represents the absolute premium class in suspension technology. This Extreme Shock Absorber for the Triumph Tiger 900 Rallye Pro is perfectly designed for touring and riding operations with frequently and significantly changing loads and riding conditions or extreme demands. The Extreme Shock Absorber features PDS, a hydraulic bottoming protection achieved through the use of a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping operates based on the degree of travel. In the majority of riding situations, the shock absorber is adjusted for comfort and energy efficiency, before the PDS engages in the final part of the shock absorber's travel.   This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The balance of the motorcycle can be easily and quickly restored by you using the hydraulic preload adjustment via the handwheel. The very finely adjustable damping at the reservoir allows for an effective, precise, and personalized suspension setting for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or spirited, ambitious riding style.   You will experience a completely new riding sensation with your motorcycle.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   The base setup installed here is tuned for riders up to 100 kg plus luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

This shock absorber is perfect for reducing the seat height (-20mm) on the Triumph Tiger 900 Rallye Pro. At the same time, your Triumph Tiger 900 Rallye Pro remains well-tuned and very suitable for touring. More performance and comfort for your Tiger 900 Rallye Pro with the Touratech Suspension Shock Absorber Type Level2. The Level2 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. Even with this design the PDS is installed. A hydraulic bottoming protection that prevents bottoming out even under the most extreme trail conditions with full luggage. Mechanical overload of the shock absorber is prevented. The damping works depending on the terrain. In the majority of driving situations, the shock absorber responds finely and is tuned for comfort and energy efficiency.   Important points at a glance: - The shock absorber is configured based on our experiences for the Triumph Tiger 900 Rallye Pro and is ready to ride. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - IMPORTANT: We strongly advise against bottoming out the fork tubes at the fork clamp.   This would severely impair the motorcycle's handling.   Note: For the safe stand of your Triumph Tiger 900 Rallye Pro after lowering, we recommend shortening the side stand.   Scope of delivery: - Ready-to-install shock absorber -20mm. - ABE documents - Installation instructions / user manual   The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

This Cartridge Kit Extreme is perfect for reducing the seat height (-20mm) for the Triumph Tiger 900 Rallye Pro. The Cartridge KIT is simply put a shock absorber for the fork and represents the absolute premium class in terms of suspension technology. The Closed Cartridge is installed in the original fork. This way, the fork bridge, handlebar mount, brakes, wheel guidance, and steering geometry remain fully intact. No additional modifications to the fork are required. This Closed Cartridge is designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme demands.   Important points at a glance: - Cartridge Kit Extreme -20mm is configured based on our experiences for the Triumph Tiger 900 Rallye Pro and is pre-set for -20mm. - With this suspension solution, the rear and front areas of the motorcycle must be adjusted together.   The basic setup is tailored for the demanding adventure rider with luggage. Adjustments for exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of the appropriate spring rate and further configurations.   Scope of delivery: - 2x Closed Cartridge -20mm - with damping adjustment, (1x) rebound stage, (1x) compression stage. - with spring preload adjustment (using a 22mm wrench) - Adjustment tool for damping - Installation tool for closure cap. - Ready for installation and filled with pre-assembled fork spring. - 1 liter of oil (for fork installation) - User manual and installation instructions - 2x fork protection stickers.   Important note: With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your Triumph Tiger 900 Rallye Pro, the side stand and/or center stand must be adjusted.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

This shock absorber is perfect for reducing the seat height (-20mm) on the Triumph Tiger 900 Rallye Pro. At the same time, your Triumph Tiger 900 Rallye Pro remains well-tuned and very suitable for touring. This shock absorber is designed for touring and riding with frequently and heavily changing loads and riding conditions or extreme requirements. The Extreme shock absorber features PDS, a hydraulic bottoming protection achieved by using a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping is dependent on the travel. In the predominant riding operation, the shock absorber is adjusted for comfort and energy-saving, before the PDS engages in the last part of the shock travel.   Important points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the Triumph Tiger 900 Rallye Pro. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - The shock absorber mentioned here is designed for a rider weight of up to 100kg including luggage. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - IMPORTANT: We strongly advise against bottoming out the fork tubes at the fork clamp.   This would severely impair the motorcycle's handling.   Note: For the safe stand of your Triumph Tiger 900 Rallye Pro after lowering, we recommend shortening the side stand.   The basic setup installed here is tuned for riders up to 100 kg plus luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Please use our suspension check form and send us the completed document.   Scope of delivery: - Ready-to-install shock absorber -20mm. - ABE documents - Installation instructions / user manual   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555

Progressive Springs for Fork and Shock Absorber for Triumph TIGER 900 1998 - These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.