Touratech Suspension Replacement Springs for BMW R1250GS LC ESA 2018 - 2020

The Touratech Suspension *CSC* Steering Damper is specially developed for the BMW R1200GS/R1250GS Adventure (LC) from 2014 and is adjustable. The riding stability of your BMW R1200GS/R1250GS Adventure (LC) is effectively optimized and can be individually and finely adjusted over 24 clicks. Whether on trails and touring with high loads or during cornering, you are always on the road with your personal setup. The original BMW steering damper is not adjustable. We have found that the linear Touratech Suspension *CSC* (Constant Safety Control) steering damper, with its permanently supportive effect, opens up completely new riding dimensions.What the Touratech Suspension *CSC* Steering Damper does:- No more strong steering input when navigating slow corners with high loads.- Minimization of disturbances transmitted to the handlebars by the rider.- Example: Wind hitting the motorcycle clothing and/or disturbances from a truck or van ahead.- Minimization of disturbances caused by ruts on highways, country roads, and trails.- The smaller front wheel with knobby tires during trail or sand riding is noticeably stabilized.- Less fatigue on long distances due to permanently higher riding stability.Your motorcycle can be significantly more stable, less fatiguing, and safer with the *CSC* steering damper.Additional features:- The Touratech Suspension CSC steering damper fits the mounting points of the BMW stock steering damper.- Damping individually and finely adjustable over 24 clicks - The Touratech CSC steering damper is delivered complete with the appropriate mounting kit. - Made from high-quality aircraft aluminum 7075 CNC machined. - Optimal response behavior for maximum safety- Elegant Touratech design and 68 mm stroke- With ABE Scope of delivery:- Touratech Suspension *CSC* Steering Damper - Appropriate mounting kit for the BMW R1200GS (LC) from 2014 BMW R1200GS (LC) Rallye BMW R1200GS Adventure (LC) from 2014 BMW R1250GS from 2018 BMW R1250GS Rallye from 2018 BMW R1250GS Adventure from 2019- Installation instructions

The Touratech Suspension Extreme Shock Absorber. The name says it all. With the "Extreme," the suspension is not automatically and continuously adjusted. The necessary adjustments are made manually, balancing the motorcycle according to the load. The hydraulic bottoming protection PDS ensures that the spring elements do not "bottom out," even under the most challenging terrain conditions and with heavy luggage. The "Extreme" suspension from Touratech Suspension for the BMW R1200GS (LC) provides more stability and comfort even in the toughest terrain and on thousands of kilometers of trails, resulting in greater safety and riding pleasure. A suspension that is uncompromisingly tuned for your world tour. INFO: Does not fit BMW ESA Next Generation "Autolevelling" from 2018For the BMW R1200GS (LC) without DDC suspension (Dynamic Damping Control), Touratech Suspension offers a "conventional" alternative. The "Extreme" shock absorber has been manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the harshest conditions in our suspensions. This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for an effective, precise, and personalized suspension setting at any time. The hydraulic bottoming protection PDS also effectively prevents mechanical bottoming at the end of the suspension travel. NOTE: Do you want to install an Extreme suspension in your BMW R1200GS (LC) 2013-2017 with DDC?To avoid error messages on the display regarding the DDC system (Dynamic Damping Control) when switching to the Touratech Suspension Extreme suspension, Touratech has developed an "optional" deactivation plug (01-045-5879-0) for BMW. This ensures that the riding modes: - ASC, ABS, and DTC continue to function perfectly. The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

The Touratech Suspension Extreme Shock Absorber. The name says it all. With the "Extreme," the suspension is not automatically and continuously adjusted. The necessary adjustments are made manually, and the shock absorber is set accordingly. The hydraulic bottoming protection PDS ensures that the Telelever system does not "bottom out" even under the most challenging off-road conditions. The "Extreme" suspension from Touratech Suspension for the BMW R 1200 GS provides more stability and comfort even in the toughest terrain and on thousands of kilometers of trails, resulting in increased safety and riding pleasure. A suspension that is uncompromisingly tuned for your world tour. INFO: Does not fit BMW ESA Next Generation "Autolevelling" from 2018For the BMW R1200 GS from 2013 without DDC suspension (Dynamic Damping Control), Touratech Suspension offers a "conventional" alternative. The "Extreme" shock absorber has been manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the harshest conditions in our suspensions. NOTE: Do you want to install an Extreme suspension in your BMW R1200GS (LC) 2013-2017 with DDC?To avoid error messages on the display regarding the DDC system (Dynamic Damping Control) when switching to the Touratech Suspension Extreme suspension, Touratech has developed an "optional" deactivation plug (01-045-5879-0) for the BMW. This ensures that ASC, ABS, and DTC continue to function perfectly. The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in suspension technology for your BMW R1200GS (LC) equipped with BMW DDC. This premium shock absorber is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW rear shock absorber. The Touratech suspension adapts to your adventure. You just have to ride.   This Touratech Suspension DDA / Plug & Travel shock absorber is made with the same precision components and parts that have already proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Important Note: - We recommend replacing both the rear and front shock absorbers together with this suspension solution. - Only then can the best possible handling be achieved with this premium suspension.   Scope of delivery: - Touratech Suspension DDA Plug & Travel shock absorber “front" - Ready for installation with connection plug and wiring.   The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate.   Please use our suspension check form and send us the completed form.   Do you have further questions? We are happy to advise you personally contact us

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in chassis technology for your BMW R1200GS equipped with BMW DDC. This premium shock absorber is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride.   This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Important Note: - We recommend replacing both the rear and front shock absorbers together with this suspension solution. - Only then can the best possible handling be achieved with this premium suspension.   Scope of delivery: - Touratech Suspension DDA Plug & Travel shock absorber “Rear" - Ready for installation with connection plug and wiring.   The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.   Do you have further questions? We are happy to advise you personally contact us

The Touratech Suspension DDA / Plug & Travel Suspension is the absolute top class in suspension technology for your BMW R1200GS (LC) equipped with BMW DDC. This premium suspension is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC suspension. The existing connectors and switches on the handlebars are utilized. This way, the Touratech suspension is integrated into the motorcycle via the original BMW control unit. You can continue to use all standard pre-settings for the various riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just need to ride.   This Touratech Suspension DDA / Plug & Travel Suspension is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this suspension is the high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any riding situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Scope of delivery: - Touratech Suspension DDA Plug & Travel front shock absorber - Touratech Suspension DDA Plug & Travel rear shock absorber - Ready for installation with connection plug and wiring.   The basic setup provided here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC)/R1250GS. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC)/R1250GS 2013-2023 without BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC)/R1250GS. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC)/R1250GS 2013-2023 with BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring for the front original shock absorber.- Replacement spring for the rear original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC). The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC) 2017 -2018 with BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

Lowering Kit -20mm perfectly tuned to the original shock absorbers of the BMW R1200GS(LC). With this spring set, you achieve a sensible lowering of -20mm while maintaining consistently good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1200GS(LC). After the conversion, the suspension still offers good responsiveness and high safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.Info: Fits only for *BMW R1200GS(LC) 2017-2018 with BMW Dynamic ESA *Our recommendation: Have the conversion carried out by a specialist workshop.Scope of delivery:- Replacement spring -20mm front for original shock absorber.- Replacement spring -20mm rear for original shock absorber.- Installation instructions.Info: Side stand and center stand can be used without modifications.Do you have further questions? We are happy to advise you personally, please contact us

The Touratech Suspension DDA / Plug & Travel Suspension is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium suspension is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC suspension. The existing connectors and switches on the handlebars are utilized. Thus, the Touratech suspension is integrated into the motorcycle via the original BMW control unit. You can continue to use all standard pre-settings for different riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel Suspension is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this suspension is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any riding situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber- Touratech Suspension DDA Plug & Travel rear shock absorber- Ready for installation with connection plug and wiring. The basic setup provided here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

The lowering by 50mm for your BMW R1200GS/R1250GS with BMW DDC auto-leveling equipment. This Touratech Suspension DDA / Plug & Travel Premium chassis is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adapts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -50mm- Touratech Suspension DDA Plug & Travel rear shock absorber -50mm- Ready for installation with connection plug and wiring. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS/R1250GS, the side stand and/or center stand must be adjusted.The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium shock absorber is specifically designed for long-distance travel with heavy luggage, on any road surface, including off-road stages . This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this shock absorber is the high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important Note:- We recommend replacing both the rear and front shock absorbers together with this suspension solution.- Only then can the best possible handling be achieved with this premium suspension.Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber “Rear"- Ready for installation with connection plug and wiring. The basic setup here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted by us with a spring of higher spring rate to meet your needs. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally contact us

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in terms of suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium shock absorber is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW rear shock absorber. The Touratech suspension adapts to your adventure. You just have to ride.   This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Important Note: - We recommend replacing both the rear and front shock absorbers together with this suspension solution. - Only then can the best possible handling be achieved with this premium suspension.   Scope of delivery: - Touratech Suspension DDA Plug & Travel shock absorber “front" - Ready for installation with connection plug and wiring.   The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.   Do you have further questions? We are happy to advise you personally contact us

These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. You will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering Replacement Springs by -20mm for BMW R 1250 GS LC ESA 2018 - 2022 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS with original factory lowering adjusted. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS. The suspension continues to offer good responsiveness and high safety in critical situations after the conversion. By replacing the springs front and rear, the balance of your motorcycle is maintained.   Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering”   Our recommendation: Have the conversion performed by a professional workshop.   Scope of delivery: - Replacement spring -25mm front for original shock absorber with factory lowering. - Replacement spring -25mm rear for original shock absorber with factory lowering. - Installation instructions.   Info: Side stand and center stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.                        

Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS Adventure with original factory lowering adjustment. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS Adventure. The suspension continues to offer good responsiveness and high safety in critical situations after the modification. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering”   Our recommendation: Have the modification carried out by a professional workshop.   Scope of delivery: - Replacement spring -25mm front for original shock absorber with factory lowering. - Replacement spring -25mm rear for original shock absorber with factory lowering. - Installation instructions.   Info: Side stand and center stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.