Touratech Suspension Replacement Springs for BMW F850GS Factory Lowered 2018 - 2020

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -40mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F850GS/BMW F850GS Adventure. After the conversion, the suspension offers significantly improved responsiveness and higher safety in critical situations. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “BMW F850GS/BMW F850GS Adventure from 2018   Scope of delivery: - Fork springs for the original fork -40mm - Replacement spring for original shock absorber -40mm - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes.   Our recommendation: Have the conversion carried out by a specialist workshop. Installation note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.   Info: The side stand and main stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW F850GS/Adventure. The shock absorber and the fork have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * BMW F850GS/Adventure from 2018*The replacement springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

These progressive fork springs are perfectly tailored to the requirements of the fork for the BMW F850GS/Adventure. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *BMW F850GS/Adventure from 2018*The fork springs can be used with or without ESA equipment.For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable components for the rear of the BMW F850GS/Adventure in our accessory recommendations. When replacing only one component, optimal handling is not achieved.Our recommendation: Have the conversion carried out by a specialist workshop.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.Do you have further questions? We are happy to advise you personally, please contact us

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of 40mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F850GS/Adventure and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for *BMW F850GS/Adventure from 2018*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.=> You can find the matching components for your BMW F850GS/Adventure in the accessories of this article. "Please scroll down"Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in terms of suspension technology for your BMW F850GS with BMW DDC equipment. This premium shock absorber is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adjusts to your adventure. You just have to ride. This Touratech Suspension DDA / Plug & Travel shock absorber is made with the same precision components and parts that have already proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important note:- We recommend revising the rear and front areas together with this suspension solution.- Only then can the best possible handling be achieved with this premium suspension. Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber "Rear"- Ready for installation with connection plug and wiring.The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

The Touratech Suspension Closed Cartridge is simply put a shock absorber for the fork. The Closed Cartridge is installed on the right side of the original fork. This way, the fork bridge/handlebar mount, brakes, wheel guidance, and steering geometry remain fully intact. No additional modifications to the left fork leg are required. This Closed Cartridge is specifically designed for the intensive touring riding of the BMW F850GS, which often experiences significant changes in load and riding conditions. Our Closed Cartridge elevates the front of the BMW F850GS to a new level of riding pleasure and performance. This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the adjustment ranges of spring preload, rebound, and compression. The cartridge is fully adjustable from the top. In a closed cartridge (Cartridge), oil and nitrogen are separated by a bladder, which guarantees constant and temperature-independent damping. This results in the Closed Cartridge providing a significantly finer and more pleasant response of the fork. The combined rebound/compression adjustment allows for an effective, precise, and personalized suspension setup that suits your riding style at any time. Built for every road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or spirited, ambitious riding style. Should exceptionally harsh road conditions affect the front wheel, the integrated "Hydraulic Endstop" prevents mechanical bottoming out of the fork.You will experience a completely new riding sensation with your motorcycle. The basic setup is tailored for the demanding adventure rider with luggage. Adjustments for exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs with a spring of the appropriate spring rate and further configurations. Scope of delivery: - 1x Closed Cartridge (right side)- 1x Sticker for original cap (left side)- Combined rebound/compression adjustment.- Spring preload adjustment (via 22mm wrench)- Adjustment tool for damping- Assembly tool for closure cap.- Installed and ready to ride, filled with pre-mounted fork spring. - 1 liter of oil (for fork installation)- User manual and installation instructionsDo you have further questions? We are happy to advise you personally, please contact us.

The lowering by -25mm is the absolute top class in terms of suspension technology for your BMW F850GS with BMW DDC equipment. This premium shock absorber is consistently designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just have to ride off. The absolute top class in terms of suspension technologyThis Touratech Suspension DDA / Plug & Travel shock absorber is made with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important note:- When lowering by -25mm, both the rear and front areas must be modified together. - Please refer to our accessories here in the web shop. Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber -25mm- Ready for installation with connection plug and wiring.Note:For the safe stand of your BMW F850GS after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally, please contact us

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of -25mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F850GS/BMW F850GS Adventure and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for *BMW F850GS/BMW F850GS Adventure from 2018*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.=> You can find the matching components for your BMW F850GS/BMW F850GS Adventure in the accessories of this item. “Please scroll down”Delivery includes:- Fork springs.- Replacement spring for original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes. - Installation instructions with setup information, Our recommendation: Have the conversion carried out by a professional workshop.Do you have further questions? We are happy to advise you personally, please contact us

The Touratech Suspension Lowering Kit from the Dutch suspension specialist Hyperpro. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -25mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F850GS / BMW F850GS Adventure. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.Info: Fits only for *BMW F850GS / BMW F850GS Adventure from 2018*The replacement springs can be used with or without ESA equipment.Scope of delivery:- Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Info: Side stand and center stand can be used without modifications.Do you have further questions? We are happy to advise you personally, please contact us

The Level2 shock absorber is the right choice for long-distance and touring use on the BMW F850GS. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW F850GS.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.Scope of delivery:- Ready-to-install shock absorber.- ABE documents- Installation instructions / user manualDo you have further questions? We are happy to advise you personally, please contact us.

This shock absorber is perfect for reducing the seat height by -25mm for the BMW F850GS. At the same time, your BMW F850GS remains well-tuned and very suitable for touring. The shock absorber of type Level2 offers a large adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F850GS, suitable fork springs must be installed for compensation. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.Important points at a glance:=> The shock absorber is configured based on our experience for the BMW F850GS and is ready to ride.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.Scope of delivery: - Ready-to-install shock absorber.- ABE documents- Installation instructions / user manualNote:For the safe stand of your BMW F850GS after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.Do you have further questions? We are happy to advise you personally, please contact us.