Touratech Suspension Replacement Springs for BMW F800GS Factory Lowered 2013 - 2018

The Touratech Suspension Lowering Kit from the Dutch suspension specialist Hyperpro. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of 50mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS / Adventure. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.Info: Fits only for * BMW F800GS / Adventure from 2013*The replacement springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Note:For the safe stand of your BMW F800GS / Adventure after lowering, we recommend the shortened side stand and/or optionally the shortened center stand. These components can be obtained from your BMW dealer.

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -50mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS. After the conversion, the suspension offers significantly improved responsiveness and higher safety in critical situations. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “BMW F800GS (2008-2012)“   Scope of delivery: - Fork springs for the original fork -50mm - Replacement spring for original shock absorber -50mm - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes.   Our recommendation: Have the conversion carried out by a professional workshop. Installation note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.   Info: The side stand and main stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly matched to the fork and shock absorber of the BMW F800GS. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.The replacement springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of 50mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS / Adventure and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for *BMW F800GS / Adventure*The replacement springs can be used with or without ESA equipment.For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the BMW F800GS / Adventure are:=> Touratech Suspension shock absorber *rear* BMW F800GS *lowering* 01-048-5864-0=> Touratech Suspension shock absorber *rear* BMW F800GS Adventure *lowering* 01-048-5884-0=> When replacing only one component, optimal handling is not achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Note:For the safe stand of your BMW F800GS after lowering, we recommend the shortened side stand and/or optionally the shortened center stand. These components can be obtained from your BMW dealer.

The Inline Extreme Shock Absorber is unique in its compact design and yet absolute premium class in terms of suspension technology. This extreme shock absorber has been specifically developed for the limited space conditions of the BMW F800GS. This shock absorber is perfect for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme requirements. Even with this compact design, our PDS is installed. A hydraulic bottoming protection that prevents bottoming out even under the most extreme trail conditions with full luggage. Mechanical overload of the shock absorber is prevented. The damping works depending on the conditions. In the predominant riding operation, the shock absorber responds finely and is tuned for comfort and energy efficiency.This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the extreme adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping in the shock absorber allows for an effective, precise, and personalized suspension setting for every road condition and purpose.An absolute WORLD INNOVATION for a completely new riding experience with your motorcycle.Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW F800GS.=> Parameters are: Vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100 kg including travel luggage.=> In all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW F800 GS is here:=> Touratech Suspension Progressive Fork Springs, BMW F800GS 01-040-7408-0=> Replacing only one component will not achieve optimal riding behavior.Features of the Touratech Suspension Extreme Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => All components are designed for intensive use with heavy touring motorcycles. => Special, low-friction seals are installed*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings are installed in the shock absorber eye for the mounting screws. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** This results in finer response of the shock absorber, *** high, precise damping performance even at very high damping frequencies (bad roads, trails),*** better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic "Extreme" preload adjustment via a conveniently positioned hand wheel. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> "Extreme" compression damping adjustment is always separately adjustable in high speed and low speed*** This allows for very individual adjustment of the compression/rebound stage. Ideal adaptation to changing requirements.=> The complete damping group is housed in the shock absorber.*** No additional seals. Direct quick response of the damping*** This results in higher load capacity and longer lifespan of the shock absorber.=> QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Information on the basic setting of the shock absorber is always retrievable. Reset possible in case of incorrect setting. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally, please contact us

Progressive Springs for Fork and Shock Absorber for BMW F 800 GS (BIGTANK) 2008 - 2012 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle travel. You will also experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering replacement springs by -40mm for BMW F 800 GS Factory lowered 2013 - 2018 The Touratech Suspension lowering kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.