Touratech Suspension Replacement Springs for BMW F650GS FACTORY LOWERED (2 Cylinder Model)

These progressive replacement springs are perfectly tuned to the fork of the BMW F650GS (Twin). The fork spring provides a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the BMW F650GS Twin are:=> Touratech Suspension Shock Absorber *rear* for BMW F650GS (Twin) from 2008 Type *Level1* 01-048-5862-0=> Öhlins BASICLINE Shock Absorber for BMW F650GS (Twin) *rear* 01-048-0905-0=> When replacing only one component, optimal handling will not be achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the inner tubes.Our recommendation: Have the conversion carried out by a professional workshop.

This shock absorber is the right choice for normal touring use on the BMW F650GS (Twin). The shock absorber type offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design and finely adjustable damping allow for a more precise adjustment and balance than is possible with the series components from motorcycle manufacturers. The spring preload can be adjusted with a tool to accommodate the large travel luggage. The damping adjustment of this Level 1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual comfort requirements. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW F650GS (Twin).=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW F650GS (Twin) is:=> Progressive fork springs, Hyperpro BMW F650GS (Twin) 01-040-7407-0=> When replacing only one component, optimal riding behavior will not be achieved.The equipment installed here with its adjustment options is sufficient if the suspension only needs to be adjusted for different load conditions rarely.Features of the Touratech Suspension Level 1 Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> QR code on the shock absorber with individual shock absorber information.*** This allows easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

The Level2 shock absorber is the right choice for long-distance and touring use on the BMW F650GS (TWIN). This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.   Key points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the BMW F650GS (TWIN). - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.   A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.   The basic setup installed here is tailored for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   The basic setup installed here is tailored for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

The Touratech Suspension Lowering Kit from the Dutch suspension specialist Hyperpro. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of 30mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F 650 GS. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.Info: Fits only for * BMW F 650 GS (TWIN) 2008-2012*Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a professional workshop.Info: The side stand and main stand can be used without modifications.Do you have further questions? We are happy to advise you personally, please contact us