Skip to main content

Touratech Suspension Lowering by 50mm for BMW F800GS up to 12 *Replacement Springs*

Product information "Touratech Suspension Lowering by 50mm for BMW F800GS up to 12 *Replacement Springs*"

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -50mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS. After the conversion, the suspension offers significantly improved responsiveness and higher safety in critical situations. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.

 

Info: Fits only for “BMW F800GS (2008-2012)“

 

Scope of delivery:

- Fork springs for the original fork -50mm

- Replacement spring for original shock absorber -50mm

- including detailed installation instructions.

- suitable fork oil.

- Paste to improve the sliding properties of the inner tubes.

 

Our recommendation: Have the conversion carried out by a professional workshop.

Installation note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.

 

Info: The side stand and main stand may need to be adjusted in length.

 

Do you have further questions?

We are happy to advise you personally, please contact us.

Email: [email protected] Phone +49 (0)7728-9279-1555

 

Please use our suspension check form and send us the completed form.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessory Items

SKF Fork Seal + Dust Cap KIT FS-45_M compatible with BMW F800GS 2006-2013 HP2
Simmerring and dust cover from SKF:- Less friction (approx. -20%) compared to conventional sealing rings- Use of a self-lubricating material- Less stick-slip- (Stick-slip = breakaway force caused by static friction)- Significantly improved sealing effect- Less air entry into the fork- Less dirt entry into the fork- thus less wear on bushings and oil- thus maintaining the optimal sliding properties of the fork- Increased long-term sealing- Excellent water, dirt, and air tightness. UV resistant For:- BMW F800GS 2006-2013 - BMW HP 2- BMW G450X- BMW G650X Dimensions:Fork sealing ring Ø45 x 58.3 x 11 mm / Wiper Ø 45 x 55.7 x 5.5 mmScope of delivery:1 piece sealing ring1 piece dust cover(Two sets are required for a complete fork)

€39.90*

Similar Items

Touratech Suspension Replacement Springs for BMW F800GS 2008-2012 (BIGTANK)
Progressive Springs for Fork and Shock Absorber for BMW F 800 GS (BIGTANK) 2008 - 2012 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle travel. You will also experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€295.00*
Touratech Suspension Replacement Springs for BMW F800GS Factory Lowered 2013 - 2018
Progressive Springs for Fork and Shock Absorber for BMW F 800 GS Factory lowered 2013 - 2018 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€279.00*