Touratech Suspension Lowering -30mm for BMW R1200GS Adventure 2006 - 2013
Product number:
1021-01-044-8005-0
Product information "Touratech Suspension Lowering -30mm for BMW R1200GS Adventure 2006 - 2013"
The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorbers. With this spring set, you achieve a sensible lowering of -30mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.
Info: Fits only for BMW R1200GS Adventure 2006 - 2013 with "original Showa" shock absorbers
Scope of delivery:
- Fork springs for the original fork.
- Replacement spring for the original shock absorber.
- Including detailed installation instructions.
- Suitable fork oil.
- Paste to improve the sliding properties of the inner tubes.
Our recommendation: Have the conversion carried out by a specialist workshop.
Info: The side stand and main stand may need to be adjusted in length.
Do you have further questions?
We are happy to advise you personally, please contact us.
Email: [email protected] Phone +49 (0)7728-9279-1555
Please use our suspension check form and send us the completed form.
Login
Accessory Items
Touratech Suspension Steering Damper *CSC* for BMW K25 R1200GS up to 2012 + Adventure up to 2013
€449.00*
The Touratech Suspension *CSC* Steering Damper effectively optimizes the riding stability of the BMW R1200 GS / Adventure, whether in off-road and touring operations with high loads or during cornering. We experience that the linear Touratech Suspension *CSC* (Constant Safety Control) steering damper, with its permanently supportive effect, opens up completely new riding dimensions.Depending on "individual requirements," the damping can be finely adjusted to the riding conditions over 24 clicks. Noticeable improvement in riding dynamics, even with high loads in travel trim, on long distances, on the worst roads, and/or on trails. The motorcycle can be maneuvered with the *CSC* steering damper significantly more stably, with less fatigue, and more safely.The following influences are significantly minimized:- No more strong steering input when cornering slowly with high loads.- Minimization of disturbances transmitted to the handlebars by the rider.- Example: Wind hitting the motorcycle clothing and disturbances caused by a truck or van ahead.- Minimization of disturbances from ruts on highways, country roads, and also trails.- Small front wheel with knobby tires during trail or sand riding is noticeably stabilized.- Less fatigue on long distances due to permanently higher riding stability.Features:- Touratech Suspension *CSC* steering damper for BMW R1200 GS / Adventure up to model year 2012 - Complete with the appropriate mounting kit for the motorcycle. - Made from high-quality aircraft aluminum 7075, CNC machined. - Characterized by sensitive response behavior- Maximum safety. Thus, it is perfectly suitable for "Offroad & Road." - Elegant Touratech design - Adjustable 24-click damping - With ABE - 75 mm strokeScope of delivery: - Touratech Suspension *CSC* steering damper - Suitable mounting kit for the BMW R1200GS / Adventure.- Installation instructions
Similar Items
Touratech Suspension Plug & Travel-ESA SET for BMW R1200GS Adventure Model 2010-2013
€3,219.00*
This Plug & Travel ESA suspension for the BMW R1200GS Adventure is a robust replacement for the BMW stock ESA suspension. The BMW ESA buttons function identically, but the riding characteristics are significantly better. The Plug & Travel ESA shock absorbers are specifically tuned to the original BMW ESA equipment of your BMW R1200GS ADV with the same ESA riding modes, offering top performance with the finest suspension technology for your BMW R1200GS ADV. The BMW ESA shock absorber is simply replaced completely. The existing connectors and switches on the handlebars are used as usual. Thus, the Touratech shock absorber is integrated into the motorcycle via the original BMW control. Info: Fits only for BMW R1200GS Adventure 2010-2013 with BMW-WP suspensionThe essential features and facts of the Plug & Travel shock absorber: - The Plug & Travel ESA suspension is pre-configured for installation "Out of the Box"- Special Touratech Plug & Travel setup of balance, damping, and rebound.- The Plug & Travel ESA shock absorbers are connected to the original connectors.- Unique, solid, electro-hydraulic Touratech "Extreme" spring preload.- Integrated in the shock absorber, unique Touratech Plug & Travel stepper motor for damping adjustment.- All components are operated via the BMW control unit and are thus integrated into the motorcycle.- The operation via the original BMW ESA button remains as usual.- The same ESA button - with significantly better effect.- Identical BMW ESA riding modes with better riding dynamics.- Display of the BMW ESA riding modes as usual in the BMW display.The complete - BMW ESA - replacement suspension for more riding pleasure & safety at the push of a button.Features of the Touratech Suspension Plug & Travel ESA:- The shock absorber housing is made of aluminum / steel.- All components are designed for intensive use with heavy touring motorcycles. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability- Special, low-friction seals are installed* This results in very low wear and a long lifespan of the shock absorber.- Stable stainless steel bushings are installed in the shock absorber eye for the mounting screws. * This ensures a stable, play-free fit of the mounting screw even under the highest loads- Integrated in the shock absorber, specially developed Touratech Suspension stepper motor.- Uniquely solid hydraulic "Extreme" spring preload via BMW ESA button- All adjustment options of the BMW ESA remain fully intact.- The Touratech Plug & Travel ESA is operated via the original BMW handlebar controls.- Special Touratech setup of balance, damping, and rebound.- The Plug Travel ESA shock absorber is fully serviceable. This ensures consistently high riding dynamics. The basic setup installed here is tuned for riders up to 100 kg including luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form. Scope of delivery: -Touratech Suspension Plug & Travel ESA front shock absorber-Touratech Suspension Plug & Travel ESA rear shock absorber- 2x Touratech Plug & Travel ESA electronics.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us
Touratech Suspension Plug & Travel-ESA Expedition SET for BMW R1200GS Adventure Model 2007-2010
€3,699.00*
This Plug & Travel ESA Expedition suspension for the BMW R1200GS ADV is consistently designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The BMW ESA buttons function identically, but the riding characteristics are significantly better. The Plug & Travel ESA shock absorbers are specifically tuned to the original BMW ESA equipment of your BMW R1200GS ADV with the same ESA riding modes, providing top performance with the finest suspension technology for your BMW R1200GS ADV. The BMW ESA shock absorber is simply replaced completely. The existing connectors and switches on the handlebars are used as usual. Thus, the Touratech shock absorber is integrated into the motorcycle via the original BMW control. Info: Fits only for BMW R1200GS Adventure 2007-2010 with BMW-Showa suspensionThe essential features and facts of the Plug & Travel shock absorber: - The Plug & Travel ESA suspension is pre-configured for installation "Out of the Box"- Special Touratech Plug & Travel setup of balance, damping, and rebound.- Plug & Travel ESA Expedition hydraulic bottoming protection "PDS"- Plug & Travel ESA Expedition compensating reservoir for adjusting the basic setup and for optimized cooling.- The Plug & Travel ESA shock absorbers are connected to the original connectors.- Unique, solid, electro-hydraulic Touratech "Extreme" spring preload.- Integrated in the shock absorber, unique Touratech Plug & Travel stepper motor for damping adjustment.- All components are operated via the BMW control unit and are thus integrated into the motorcycle.- The operation via the original BMW ESA button remains as usual.- The same ESA button - with significantly better effect.- Identical BMW ESA riding modes with better riding dynamics.- Display of the BMW ESA riding modes as usual in the BMW display.The Plug & Travel ESA replacement suspension for your next long-distance adventure with your BMW R1200 GS.Features of the Touratech Suspension Plug & Travel ESA:- The shock absorber housing is made of aluminum / steel.- All components are designed for intensive use with heavy touring motorcycles. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability- Special, low-friction seals are installed* This results in very low wear and a long lifespan of the shock absorber.- Stable stainless steel bushings are installed in the shock absorber eye for the mounting screws. * This ensures a stable, play-free fit of the mounting screw even under the highest loads- Integrated in the shock absorber, specially developed Touratech Suspension stepper motor.- Uniquely solid hydraulic "Extreme" spring preload via the BMW ESA button- All adjustment options of the BMW ESA remain fully intact.- The Touratech Plug & Travel ESA is operated via the original BMW handlebar controls.- Special Touratech setup of balance, damping, and rebound.- The Plug Travel ESA shock absorber is fully serviceable. This ensures consistently high riding dynamics.- The Expedition PDS is a hydraulic bottoming protection achieved by using a second * damping piston. The effect: No mechanical bottoming of the shock absorber.- The Expedition compensating reservoir allows for a larger oil volume and thus better cooling at high * damping frequencies. An additional compression damping adjustment separated into high speed * and low speed allows for very fine and extended adjustment of the Plug & Travel ESA basic setup. The basic setup provided here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form. Scope of delivery: -Touratech Suspension Plug & Travel ESA shock absorber FRONT-Touratech Suspension Plug & Travel ESA Expedition shock absorber REAR- 2x Touratech Plug & Travel ESA electronics.- Assembly instructions.Do you have further questions? We are happy to advise you personally, please contact us
Touratech Suspension Plug & Travel-ESA Expedition SET for BMW R1200GS Adventure Model 2010-2013
€3,699.00*
This Plug & Travel ESA Expedition suspension for the BMW R1200GS ADV is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages designed. The BMW ESA buttons function identically, but the riding characteristics are significantly better. The Plug & Travel ESA shock absorbers are specifically tuned to the original BMW ESA equipment of your BMW R1200GS ADV with the same ESA riding modes, providing top performance with the finest suspension technology for your BMW R1200GS ADV. The BMW ESA shock absorber is simply replaced completely. The existing connectors and switches on the handlebars are used as usual. Thus, the Touratech shock absorber is integrated into the motorcycle via the original BMW control. Info: Fits only for BMW R1200GS Adventure 2010-2013 with BMW-White Power suspensionThe essential features and facts of the Plug & Travel shock absorber: - The Plug & Travel ESA suspension is pre-configured for installation "Out of the Box"- Special Touratech Plug & Travel setup of balance, damping, and rebound.- Plug & Travel ESA Expedition hydraulic bottoming protection "PDS"- Plug & Travel ESA Expedition compensating reservoir for adjusting the basic setup and for optimized cooling.- The Plug & Travel ESA shock absorbers are connected to the original connectors.- Unique, solid, electro-hydraulic Touratech "Extreme" spring preload.- Integrated in the shock absorber, unique Touratech Plug & Travel stepper motor for damping adjustment.- All components are operated via the BMW control unit and are thus integrated into the motorcycle.- The operation via the original BMW ESA button remains as usual.- The same ESA button - with significantly better effect.- Identical BMW ESA riding modes with better riding dynamics.- Display of the BMW ESA riding modes as usual in the BMW display.The Plug & Travel ESA replacement suspension for your next long-distance adventure with your BMW R1200 GS.Features of the Touratech Suspension Plug & Travel ESA:- The shock absorber housing is made of aluminum / steel.- All components are designed for intensive use with heavy touring motorcycles. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability- Special, low-friction seals are installed* This results in very low wear and a long lifespan of the shock absorber.- Stable stainless steel bushings are installed in the shock absorber eye for the mounting screws. * This ensures a stable, play-free fit of the mounting screw even under the highest loads- Integrated in the shock absorber, specially developed Touratech Suspension stepper motor.- Uniquely solid hydraulic "Extreme" spring preload via the BMW ESA button- All adjustment options of the BMW ESA remain fully intact.- The Touratech Plug & Travel ESA is operated via the original BMW handlebar controls.- Special Touratech setup of balance, damping, and rebound.- The Plug Travel ESA shock absorber is fully serviceable. This ensures consistently high riding dynamics.- The Expedition PDS is a hydraulic bottoming protection achieved by using a second * damping piston. The effect: No mechanical bottoming of the shock absorber.- The Expedition compensating reservoir allows for a larger oil volume and thus better cooling at high * damping frequencies. An additional compression damping adjustment separated into high speed * and low speed allows for very fine and extended adjustment of the Plug & Travel ESA basic setup. The basic setup provided here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the filled-out form. Scope of delivery: - Touratech Suspension Plug & Travel ESA shock absorber FRONT- Touratech Suspension Plug & Travel ESA Expedition shock absorber REAR- 2x Touratech Plug & Travel ESA electronics.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us
Progressive replacement springs front and rear for BMW R1200GS Adventure 2006-2013 BMW original shock absorber
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS ADV. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS 2006-2013 with Showa Original BMW ADV shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us.
Progressive replacement springs front and rear for BMW R1200GS Adventure ESA 2007-2010
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS ADV ESA. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS 2007-2010 with Showa Original BMW ADV ESA shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Delivery contents:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us.
Progressive replacement springs front and rear for BMW R1200GS Adventure ESA 2010-2013
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS ADV ESA. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS 2010-2013 with WP Original BMW ADV ESA shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us