Touratech Suspension Lowering -30mm for BMW F750GS from 2018 Type Level2
Product number:
1021-01-082-5861-0
Product information "Touratech Suspension Lowering -30mm for BMW F750GS from 2018 Type Level2"
This shock absorber is perfect for reducing the seat height by -30mm for the BMW F750GS. At the same time, your BMW F750GS remains well-tuned and very suitable for touring. The shock absorber of type Level2 offers a large adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F750GS, suitable fork springs must be installed for compensation. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment by you. The damping adjustment of this shock absorber allows for the necessary influence on the rebound and compression stages to implement your individual requirements for riding comfort.
Important points at a glance:
=> The shock absorber is configured based on our experiences for the BMW F750GS and is ready to ride.
=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
A shock absorber with which you can easily and comfortably respond to different loading conditions of your motorcycle.
The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.
Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual
Note:
For the safe stand of your BMW F750GS after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.
Do you have further questions? We are happy to advise you personally, please contact us
Important points at a glance:
=> The shock absorber is configured based on our experiences for the BMW F750GS and is ready to ride.
=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
A shock absorber with which you can easily and comfortably respond to different loading conditions of your motorcycle.
The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.
Scope of delivery:
- Ready-to-install shock absorber.
- ABE documents
- Installation instructions / user manual
Note:
For the safe stand of your BMW F750GS after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.
Do you have further questions? We are happy to advise you personally, please contact us
Login
Similar Items
Touratech Suspension Replacement Springs for BMW F750GS Factory Lowered
€279.00*
Progressive Springs for Fork and Shock Absorber for BMW F 750 GS Factory Lowered 2018 - 2023 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.