Touratech Suspension Lowering -25mm for BMW R 1250 GS LC ADVENTURE factory low ESA
Product number:
1021-01-037-8003-0
Product information "Touratech Suspension Lowering -25mm for BMW R 1250 GS LC ADVENTURE factory low ESA"
Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS Adventure with original factory lowering adjustment. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS Adventure. The suspension continues to offer good responsiveness and high safety in critical situations after the modification. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.
Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering”
Our recommendation: Have the modification carried out by a professional workshop.
Scope of delivery:
- Replacement spring -25mm front for original shock absorber with factory lowering.
- Replacement spring -25mm rear for original shock absorber with factory lowering.
- Installation instructions.
Info: Side stand and center stand may need to be adjusted in length.
Do you have further questions?
We are happy to advise you personally; please contact us.
Email: [email protected] Phone +49 (0)7728-9279-1555
Please use our suspension check form and send us the completed form.
Login
Similar Items
Touratech Suspension E1 Replacement Springs for BMW R 1250 GS LC ADVENTURE ESA
€219.00*
Progressive Springs for Fork and Shock Absorber for BMW R 1250 GS LC ADVENTURE ESA 2018 - 2021 These progressive replacement springs are perfectly matched to the shock absorbers of your motorcycle. This results in better tuning for the demands of motorcycle travel. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Replacement spring for original front shock absorber. - Replacement spring for original rear shock absorber. - including detailed installation instructions. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.
Touratech Suspension E1 Lowering -20mm for BMW R 1250 GS LC ADVENTURE ESA
€229.00*
Lowering Kit -20mm perfectly tuned to the original shock absorbers of the BMW R1250GS Adventure . With this spring kit, you achieve a sensible lowering of -20mm while maintaining consistently good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS Adventure. The suspension continues to offer good responsiveness and high safety in critical situations after the conversion. By replacing the springs at the front and rear, the balance of your motorcycle is preserved. Info: Fits only for “BMW R1250GS Adventure from 2018-2024 with BMW Dynamic ESA” Our recommendation: Have the conversion carried out by a professional workshop. Scope of delivery: - Replacement spring -20mm front for original shock absorber. - Replacement spring -20mm rear for original shock absorber. - Installation instructions. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Replacement Springs for BMW R1250GS LC ESA 2018 - 2020
€219.00*
Progressive Springs for Fork and Shock Absorber for BMW R 1250 GS LC ESA 2018 - 2022 These progressive replacement springs are perfectly matched to the shock absorbers of your motorcycle. This results in better tuning for the demands of motorcycle travel. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Replacement spring for original front shock absorber. - Replacement spring for original rear shock absorber. - including detailed installation instructions. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Replacement Springs for BMW R1250GS LC Factory Low ESA 2018 - 2020
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. You will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Replacement Springs for BMW R1250GS Adventure LC factory low ESA 2018 - 2020
€229.00*
These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS Adventure model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Lowering -20mm for BMW R 1250 GS LC ESA 2018 - 2020
€229.00*
Lowering Replacement Springs by -20mm for BMW R 1250 GS LC ESA 2018 - 2022 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Lowering -25mm for BMW R1250GS LC factory low ESA 2018 - 2020
€229.00*
Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS with original factory lowering adjusted. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS. The suspension continues to offer good responsiveness and high safety in critical situations after the conversion. By replacing the springs front and rear, the balance of your motorcycle is maintained. Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: Have the conversion performed by a professional workshop. Scope of delivery: - Replacement spring -25mm front for original shock absorber with factory lowering. - Replacement spring -25mm rear for original shock absorber with factory lowering. - Installation instructions. Info: Side stand and center stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.