Skip to main content

Touratech Suspension Lowering -25mm Cartridge Kit for Honda CRF1000L Africa Twin 2015-2017

Product information "Touratech Suspension Lowering -25mm Cartridge Kit for Honda CRF1000L Africa Twin 2015-2017"

This Cartridge Kit Extreme is perfect for reducing the seat height (-25mm) on the Honda CRF1000L Africa Twin. The Cartridge KIT is simply put a shock absorber for the fork and represents the absolute premium class in terms of suspension technology. The Closed Cartridge is installed in the original fork. This way, the fork bridge, handlebar mount, brakes, wheel guidance, and steering geometry remain fully intact. No additional modifications to the fork are required. This Cartridge is designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme demands.

 

This means for you:

Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The spring preload, rebound, and compression damping are fully adjustable from the top. The damping oil is contained in a closed cartridge, allowing for precise oil quantity dosing. This results in the Closed Cartridge offering a significantly finer and more pleasant response of the fork. The very finely adjustable damping allows for an effective, precise, and personalized suspension setting for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long trips with large luggage, or a sporty, ambitious riding style. Should exceptionally harsh road conditions affect the front wheel, the integrated "Hydraulic Endstop" prevents mechanical bottoming out of the fork.

 

Note:

For the safe stand of your Honda CRF1000L Africa Twin after lowering, we recommend shortening the side stand.

 

Scope of delivery:

- 2x Closed Cartridge -25mm

- with damping adjustment, (1x) rebound, (1x) compression.

- with spring preload adjustment (using a 22mm wrench)

- Adjustment tool for damping

- Installation tool for the cap.

- Ready to install and filled with pre-assembled fork spring.

- 1 liter of oil (for fork installation)

- User manual and installation instructions

- 2x fork protection stickers.

 

The basic setup is tailored for the demanding adventure rider with luggage.

Adjustments for exceptional requirements are possible. The shock absorber will then be individually adapted to your needs with a spring of the appropriate spring rate and further configurations.

 

Do you have further questions?

We are happy to advise you personally, please contact us.

Email: [email protected] Phone +49 (0)7728-9279-1555

 

Please use our suspension check form and send us the completed form.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar Items

Touratech Suspension Lowering -25mm Honda CRF1000L Africa Twin 15-17 Type Extreme
This shock absorber is perfect for reducing the seat height (-25mm) for the Honda CRF1000L. At the same time, your Honda CRF 1000 L Africa Twin remains well-tuned and very suitable for touring. This shock absorber is designed for touring and riding with frequently and heavily changing loads and riding conditions or extreme demands. The extreme shock absorber features PDS, a hydraulic bottoming protection through the use of a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping works based on the travel. In the predominant riding operation, the shock absorber is comfortably and power-saving adjusted, before the PDS engages in the last part of the shock absorber's travel. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the Honda CRF1000L.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps. This severely negatively affects the motorcycle's handling.Note:For the safe stand of your Honda CRF1000L Africa Twin after lowering, we recommend shortening the side stand. Scope of delivery: - Ready-to-install shock absorber -25mm.- ABE documents- Installation instructions / user manualDo you have further questions? We are happy to advise you personally, please contact us

€1,489.00*
Touratech Suspension Replacement Springs for Honda CRF1000L (also ABS / DCT) 2018 - 2019
These progressive replacement springs achieve + 20mm more ground clearance, sportier response behavior, and higher reserves in the limit range with the original spring elements. The springs are perfectly tuned to the original shock absorber and fork of the Honda CRF1000L Africa Twin . Your motorcycle will have a cost-effective and optimized setup after the conversion, tailored to the demands of off-road motorcycle travel. Info: Fits only for *Honda CRF1000L Africa Twin 2018-2019 with original spring elements* Our recommendation: Have the conversion carried out by a specialist workshop. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€279.00*
Touratech Suspension E1 Shock Absorber for Honda CRF 1000 L (also ABS / DCT) 2016 - 2017
Touratech Suspension E1 Mono Shock Absorber for Honda CRF 1000 L (also ABS / DCT) 2016 - 2017 The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber carried out by a specialist workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€549.00*