Skip to main content

Touratech Suspension Lowering -20mm Triumph Tiger 900 Rallye Pro from 2020 Type Extreme

Product information "Touratech Suspension Lowering -20mm Triumph Tiger 900 Rallye Pro from 2020 Type Extreme"

This shock absorber is perfect for reducing the seat height (-20mm) on the Triumph Tiger 900 Rallye Pro. At the same time, your Triumph Tiger 900 Rallye Pro remains well-tuned and very suitable for touring. This shock absorber is designed for touring and riding with frequently and heavily changing loads and riding conditions or extreme requirements. The Extreme shock absorber features PDS, a hydraulic bottoming protection achieved by using a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping is dependent on the travel. In the predominant riding operation, the shock absorber is adjusted for comfort and energy-saving, before the PDS engages in the last part of the shock travel.

 

Important points at a glance:

- The shock absorber is configured and ready to ride based on our experiences for the Triumph Tiger 900 Rallye Pro.

- Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.

- The shock absorber mentioned here is designed for a rider weight of up to 100kg including luggage.

- For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.

- IMPORTANT: We strongly advise against bottoming out the fork tubes at the fork clamp.

  This would severely impair the motorcycle's handling.

 

Note:

For the safe stand of your Triumph Tiger 900 Rallye Pro after lowering, we recommend shortening the side stand.

 

The basic setup installed here is tuned for riders up to 100 kg plus luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.

 

Please use our suspension check form and send us the completed document.

 

Scope of delivery:

- Ready-to-install shock absorber -20mm.

- ABE documents

- Installation instructions / user manual

 

Do you have further questions?

We are happy to advise you personally, please contact us.

Email: [email protected] Phone +49 (0)7728-9279-1555

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar Items

Touratech Suspension Replacement Springs for Triumph TIGER 900 1991 - 1997
Progressive Springs for Fork and Shock Absorber for Triumph TIGER 900 1991 - 1997 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

€279.00*