Touratech Suspension E1 Shock Absorber for Yamaha XT 1200 Z Super Tenere (Not ZE/ES) 2010 -

The Level 2 Shock Absorber is the right choice for long-distance and touring use for the Yamaha XT1200Z Tenere. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic spring preload, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly adjusted by hand via the hydraulic spring preload. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha XT1200Z Tenere.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the Yamaha XT1200Z Tenere from 2010 is:=> Progressive fork springs, Yamaha XT1200Z Tenere part no. 01-046-0307-0Replacing only one component will not achieve optimal handling.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.Features of the Touratech Suspension Level 2 Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic high-end spring preload via a conveniently positioned handwheel. => QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings. The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustmentsfor higher rider weights (more than 100kg) and/or for predominantly passenger operation / with travel luggage arepossible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us

These progressive fork springs are perfectly tuned to the requirements of the fork for the Yamaha XT1200Z Super Tenere. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Not suitable for Yamaha XT1200ZE Super TenereFor all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Yamaha XT1200Z Super Tenere are:=> Touratech Suspension shock absorber *rear* for Yamaha XT1200Z Super Tenere type *Level2* 01-046-5880-0=> When replacing only one component, optimal handling will not be achieved.Tip for adjusting the original fork with these fork springs:Rebound: 10 clicks / Compression: 7 clicks / Spring preload: 5 rings visibleDelivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the Yamaha XT1200Z Super Tenere. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Not suitable for Yamaha XT1200ZE Super TenereTip for adjusting the original fork with these fork springs:Rebound: 10 clicks / Compression: 7 clicks / Spring preload: 5 rings visibleDelivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us.

The Touratech Suspension Extreme Shock Absorber represents the absolute premium class in suspension technology. This Extreme Shock Absorber for the Yamaha XT1200Z Super Tenere is perfectly designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme demands. The Extreme Shock Absorber features PDS, a hydraulic bottoming protection achieved through the use of a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping operates based on the position. In the majority of riding situations, the shock absorber is comfortably and power-saving adjusted, before the PDS engages in the final part of the shock stroke.This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for an effective, precise, and personalized suspension setting for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or a sporty, ambitious riding style. You will experience a completely new riding sensation with your motorcycle.Important points at a glance:Not suitable for Yamaha XT1200ZE Super Tenere=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha XT1200Z Super Tenere.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100 kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the Yamaha XT1200Z Super Tenere is here:=> Progressive fork springs, Yamaha XT1200Z Super Tenere Type: 01-046-0307-0=> Replacing only one component will not achieve optimal riding behavior.Info button on the Touratech Suspension microsite (still in development) Features of the Touratech Suspension Extreme Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => All components are designed for intensive use with heavy touring motorcycles. => Special, low-friction seals are used*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings are installed in the shock eye for the mounting screws. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** This results in finer response of the shock absorber, *** high, precise damping performance even at very high damping frequencies (poor roads, trails),*** better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic "Extreme" preload adjustment via a conveniently positioned hand wheel. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> "Extreme" compression damping adjustment is always separately adjustable in high speed and low speed*** This allows for very individual adjustment of the compression/rebound stage. Ideal adaptation to changing requirements.=> Separate "Extreme" reservoir in the damping group of the shock absorber.*** This results in better cooling of the damping during operation.*** This leads to higher load capacity and longer lifespan of the shock absorber.=> QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Information on the basic setting of the shock absorber is always retrievable. Reset possible in case of incorrect setting. The basic setup provided here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us

Lowering replacement springs by -35mm for Yamaha XT 1200 Z Super Tenere (Not ZE/ES) 2010 - 2019 The Touratech Suspension lowering kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.