Touratech Shock Absorber Suspension BASIC - SET for BMW R1200GS Model 2004-2012
Product number:
1021-01-044-5848-0
Product information "Touratech Shock Absorber Suspension BASIC - SET for BMW R1200GS Model 2004-2012"
The Touratech Suspension Level2 Set is the right choice for long-distance and touring use on the BMW R1200GS. These shock absorbers offer a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to implement your individual requirements for riding comfort.
Important points at a glance:
=> The suspension set is configured and ready to ride based on our experiences for the BMW R1200GS (K25).
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorbers mentioned here are designed for a rider weight of up to 100kg including travel luggage.
=> In this SET, the rear and front areas of the motorcycle are adjusted and in perfect balance.
A suspension set that allows you to easily and comfortably respond to different loading conditions of your motorcycle.
The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.
Scope of delivery:
- Ready-to-install front shock absorber Type Level1
- Ready-to-install rear shock absorber Type Level2
- ABE documents
- Installation instructions / User manual ONLINE
Do you have further questions? We are happy to advise you personally, please contact us
Important points at a glance:
=> The suspension set is configured and ready to ride based on our experiences for the BMW R1200GS (K25).
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorbers mentioned here are designed for a rider weight of up to 100kg including travel luggage.
=> In this SET, the rear and front areas of the motorcycle are adjusted and in perfect balance.
A suspension set that allows you to easily and comfortably respond to different loading conditions of your motorcycle.
The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.
Scope of delivery:
- Ready-to-install front shock absorber Type Level1
- Ready-to-install rear shock absorber Type Level2
- ABE documents
- Installation instructions / User manual ONLINE
Do you have further questions? We are happy to advise you personally, please contact us
Login
Similar Items
Touratech Suspension Lowering -30mm for BMW R1200GS 2006 - 2012
€229.00*
Lowering Replacement Springs by -30mm for BMW R 1200 GS 2006 - 2012 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.