Touratech Rear Shock Absorber for Yamaha XT1200Z Tenere Type (2010-2013) Type *Level2*
Product information "Touratech Rear Shock Absorber for Yamaha XT1200Z Tenere Type (2010-2013) Type *Level2*"
The Level 2 Shock Absorber is the right choice for long-distance and touring use for the Yamaha XT1200Z Tenere. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic spring preload, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly adjusted by hand via the hydraulic spring preload. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.
Important points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha XT1200Z Tenere.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> The suitable component for the front of the Yamaha XT1200Z Tenere from 2010 is:
=> Progressive fork springs, Yamaha XT1200Z Tenere part no. 01-046-0307-0
Replacing only one component will not achieve optimal handling.
A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.
Features of the Touratech Suspension Level 2 Shock Absorber:
=> The shock absorber housing is made of aluminum.
*** This results in the lowest possible weight.
=> Special, low-friction seals are installed.
*** This results in very low wear and a long lifespan of the shock absorber.
=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye.
*** This ensures a stable, play-free fit of the mounting screw even under the highest loads.
=> All components are designed for intensive use with heavy touring motorcycles.
=> The damping settings were developed based on the experiences and requirements of Touratech.
*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.
=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.
*** Finer response of the shock absorber.
*** High, precise damping performance even at very high damping frequencies (bad roads, tracks).
*** Better cooling of the shock absorber.
*** Minimal restrictions on the installation position of the shock absorber in the motorcycle.
=> Hydraulic high-end spring preload via a conveniently positioned handwheel.
=> QR code on the shock absorber with individual shock absorber information.
*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.
*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings.
The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustments
for higher rider weights (more than 100kg) and/or for predominantly passenger operation / with travel luggage are
possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.
Do you have further questions? We are happy to advise you personally, please contact us
Important points at a glance:
=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha XT1200Z Tenere.
=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> The suitable component for the front of the Yamaha XT1200Z Tenere from 2010 is:
=> Progressive fork springs, Yamaha XT1200Z Tenere part no. 01-046-0307-0
Replacing only one component will not achieve optimal handling.
A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.
Features of the Touratech Suspension Level 2 Shock Absorber:
=> The shock absorber housing is made of aluminum.
*** This results in the lowest possible weight.
=> Special, low-friction seals are installed.
*** This results in very low wear and a long lifespan of the shock absorber.
=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye.
*** This ensures a stable, play-free fit of the mounting screw even under the highest loads.
=> All components are designed for intensive use with heavy touring motorcycles.
=> The damping settings were developed based on the experiences and requirements of Touratech.
*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.
=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.
*** Finer response of the shock absorber.
*** High, precise damping performance even at very high damping frequencies (bad roads, tracks).
*** Better cooling of the shock absorber.
*** Minimal restrictions on the installation position of the shock absorber in the motorcycle.
=> Hydraulic high-end spring preload via a conveniently positioned handwheel.
=> QR code on the shock absorber with individual shock absorber information.
*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.
*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings.
The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustments
for higher rider weights (more than 100kg) and/or for predominantly passenger operation / with travel luggage are
possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.
Do you have further questions? We are happy to advise you personally, please contact us
Login
Accessory Items
Touratech Progressive Fork Springs for Yamaha XT1200Z Super Tenere from 2010
€169.00*
These progressive fork springs are perfectly tuned to the requirements of the fork for the Yamaha XT1200Z Super Tenere. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Not suitable for Yamaha XT1200ZE Super TenereFor all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Yamaha XT1200Z Super Tenere are:=> Touratech Suspension shock absorber *rear* for Yamaha XT1200Z Super Tenere type *Level2* 01-046-5880-0=> When replacing only one component, optimal handling will not be achieved.Tip for adjusting the original fork with these fork springs:Rebound: 10 clicks / Compression: 7 clicks / Spring preload: 5 rings visibleDelivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.