Touratech Progressive Springs for Fork and Shock Absorber for KTM 890 Adventure R from 2021 Replacement Springs

These progressive fork springs are perfectly tailored to the requirements of the fork for the KTM 890 Adventure R. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for “KTM 890 Adventure R (2021-2023)   For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable components for the rear of the KTM 890 Adventure R in our accessory recommendation. When replacing only one component, optimal handling will not be achieved.   Our recommendation: Have the conversion carried out by a specialist workshop.   Scope of delivery: - Replacement spring for the original fork. - Suitable fork oil. - Paste to improve the glide properties of the inner tubes. - Including detailed installation instructions.   Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -30mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the KTM 890 Adventure R. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “KTM 890 Adventure R (2021-2023)   Scope of delivery: - Fork springs for the original fork -30mm - Replacement spring for original shock absorber -30mm - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes.   Our recommendation: Have the conversion carried out by a specialist workshop. Installation note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.   Info: The side stand and main stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.