Touratech Professional Tool Set for KTM and Ducati Motorcycles, 68 pieces

The professional motorcycle tool for KTM, Husqvarna, and Ducati motorcycles for on-the-go and for the workshop at home. Whether on a long motorcycle trip or a short ride, this 68-piece motorcycle tool kit allows you to perform necessary tasks at any time.

The sturdy double-layer roll bag, weighing only 2.45 kg, comes with a professional motorcycle tool set made from the best materials: the S2 bits with black phosphate rust protection. The sockets and wrenches are Cr-V satin chrome plated. With its compact dimensions, this motorcycle tool bag in Touratech design always finds a place on your bike.

With MIT socket system (metric, inch, Torx): suitable for square, 6- or 12-point, star, spline, and damaged nuts.

Touratech Professional Tool Set for KTM, Husqvarna and Ducati motorcycles, 68 pieces, includes:

• 3-in-1 multifunction tool: T-handle - 1/4" hex bit ratchet - 11 mm ratchet

• Extension "Turbo Sleeve" for 1/4" hex bit ratchet

• Socket adapter 6mm square to 1/4"

• 13mm ratchet wrench (ring/open-end wrench)

• Socket adapter 13mm to 3/8"

• Bit set internal hex T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, Phillips PH3, slotted 5mm (drive: 1/4" = 6.35mm, length: 25 mm)

• Bit set internal hex H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, Phillips PH2 (drive: 1/4" = 6.35mm, length: 25 mm)

• Socket MIT: 6 mm (1/4, E8) with drive: 1/4" = 6.35mm

• Socket MIT: 8 mm (5/16, E10)

• Socket MIT: 10 mm (3/8, E12)

• Socket MIT: 11 mm (7/16, E14)

• Socket MIT: 12 mm (15/32, -)

• Socket MIT: 13 mm (1/2, -)

• Socket MIT: 14 mm (9/16, E18)

• Socket MIT: 15 mm (19/32, -)

• Socket MIT: 17 mm (11/16, -)

• Socket holder (7 x 1/4" & 2 x 3/8")

• 8 mm ring/open-end wrench, MIT on the ring side

• 10 mm ring/open-end wrench, MIT on the ring side

• 12 mm ring/open-end wrench, MIT on the ring side

• 14 mm ring/open-end wrench, MIT on the ring side

• 16 mm ring/open-end wrench, MIT on the ring side

• Small tire pressure gauge up to 3.5 Bar (kg) or 50 psi

• Locking pliers, 169 mm long

• 10x cable ties, 100 mm long

• 14 mm spark plug socket 3/8"

• 16 mm spark plug socket 3/8"

• Poplock extension 3/8" with 16 mm external hex, 125 mm long

• 3/8" 72-Tooth Super Light Matt Finishing Ratchet

• Socket MIT: 22 mm (7/8, -)

• Hex Bit 27mm
• Hex Bit 32mm
  

• Adapter 3/8" socket to 1/4" bits

• 17 mm ring/open-end wrench, MIT on the ring side
• High-quality roll bag in Touratech design
  210 Den nylon bag (19 x 35 cm)

Weight: 2.45 kg
Dimensions open: W 49cm x H 26.5cm
Dimensions rolled: Ø 9 x 26.5cm