Touratech Lowering by 20mm for BMW F800GS + Adventure from 2013 Replacement Springs
Product number:
1021-01-048-5834-0
Product information "Touratech Lowering by 20mm for BMW F800GS + Adventure from 2013 Replacement Springs"
The Touratech Suspension Lowering Kit from the Dutch suspension specialist Hyperpro. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of 20mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.
The replacement springs can be used with or without ESA equipment.
Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.
Our recommendation: Have the conversion carried out by a professional workshop.
Info: The side stand and center stand can be used without modifications.
The replacement springs can be used with or without ESA equipment.
Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.
Our recommendation: Have the conversion carried out by a professional workshop.
Info: The side stand and center stand can be used without modifications.
Login
Accessory Items
SKF Fork Seal + Dust Cap WP43 suitable for BMW F800GS + Adventure from 2013
€39.90*
Simmerring and Dust Cap from SKF:- Less friction (approx. -20%) compared to conventional sealing rings- Use of a self-lubricating material- Less stick-slip - (Stick-slip = breakaway force caused by static friction)- Significantly improved sealing effect - Less air entry into the fork- Less dirt entry into the fork - thus less wear on sliding bushings and oil - thus maintaining the optimal sliding properties of the fork- Increased long-term tightness - Excellent water, dirt, and air tightness. UV resistantDimensions:Fork sealing ring Ø43 x 52.9 x 9.5mm / Wiper Ø43 x 53.4 x 5.8 mmScope of delivery:1 piece sealing ring1 piece dust cap(Two sets are required for a complete fork)