Touratech Lowering 50mm Replacement Springs for BMW F800GS + Adventure from 2013
Product number:
1021-01-048-5832-0
Product information "Touratech Lowering 50mm Replacement Springs for BMW F800GS + Adventure from 2013"
The Touratech Suspension Lowering Kit from the Dutch suspension specialist Hyperpro. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of 50mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS / Adventure. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.
Info: Fits only for * BMW F800GS / Adventure from 2013*
The replacement springs can be used with or without ESA equipment.
Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.
Our recommendation: Have the conversion carried out by a specialist workshop.
Note:
For the safe stand of your BMW F800GS / Adventure after lowering, we recommend the shortened side stand and/or optionally the shortened center stand. These components can be obtained from your BMW dealer.
Info: Fits only for * BMW F800GS / Adventure from 2013*
The replacement springs can be used with or without ESA equipment.
Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.
Our recommendation: Have the conversion carried out by a specialist workshop.
Note:
For the safe stand of your BMW F800GS / Adventure after lowering, we recommend the shortened side stand and/or optionally the shortened center stand. These components can be obtained from your BMW dealer.
Login
Accessory Items
SKF Fork Seal + Dust Cap WP43 suitable for BMW F800GS + Adventure from 2013
€39.90*
Simmerring and Dust Cap from SKF:- Less friction (approx. -20%) compared to conventional sealing rings- Use of a self-lubricating material- Less stick-slip - (Stick-slip = breakaway force caused by static friction)- Significantly improved sealing effect - Less air entry into the fork- Less dirt entry into the fork - thus less wear on sliding bushings and oil - thus maintaining the optimal sliding properties of the fork- Increased long-term tightness - Excellent water, dirt, and air tightness. UV resistantDimensions:Fork sealing ring Ø43 x 52.9 x 9.5mm / Wiper Ø43 x 53.4 x 5.8 mmScope of delivery:1 piece sealing ring1 piece dust cap(Two sets are required for a complete fork)
Similar Items
Touratech Suspension Replacement Springs for BMW F800GS Factory Lowered 2013 - 2018
€279.00*
Progressive Springs for Fork and Shock Absorber for BMW F 800 GS Factory lowered 2013 - 2018 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.
Touratech Suspension Lowering -40mm for BMW F800GS 2013 - 2018 Factory lowered
€279.00*
Lowering replacement springs by -40mm for BMW F 800 GS Factory lowered 2013 - 2018 The Touratech Suspension lowering kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.