Touratech Hard Part Steering Stop Black for BMW R1250GS R1200GS LC
Product number:
1021-01-045-5295-0
Product information "Touratech Hard Part Steering Stop Black for BMW R1250GS R1200GS LC"
Even in minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts can also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.
The stainless steel part is coated in black plastic powder.
The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.
Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.
Not suitable for special model R1250GS "HP" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.
- Weight: approx. 250 g
- Dimensions: approx. 175 mm x 85 mm x 55 mm
The stainless steel part is coated in black plastic powder.
The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.
Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.
Not suitable for special model R1250GS "HP" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.
- Weight: approx. 250 g
- Dimensions: approx. 175 mm x 85 mm x 55 mm
Login
Accessory Items
Touratech Black Stainless Steel Radiator Guard for BMW R1250GS R1200GS LC + Adventure LC
€119.90*
BMW has been using water cooling for new boxer engines since 2013. This allows for optimal performance combined with high durability. Technically implemented perfectly, the system has only one weak point: the sensitive water cooler.The Touratech radiator guard protects the vulnerable fins of the cooler from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey becomes much safer with minimal effort!Visually understated yet unmistakably in the Touratech style, the radiator guard made of laser-cut, electropolished stainless steel integrates perfectly into the design of the GS.Material: electropolished stainless steel blackColor: silverScope of delivery: 2 parts (left and right)For tough off-road use, the radiator guard can additionally be secured with the included cable ties.Note: Covering the radiator can cause temperature problems for the engine under unfavorable conditions, at high outside temperatures, and at full load. Please pay attention to your water temperature gauge.
Touratech Starter Protection Black for BMW R1200GS LC + Adventure LC R1250GS + Adventure
€54.90*
Protects the starter from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.
Touratech Splash Guard Passenger Footpeg Holder Set BMW R1250GS + Adventure R1200GS LC
€109.90*
In rainy rides, the rear wheel often splashes dirt and water directly onto your boots and legs. These high-quality, super lightweight plastic parts prevent this effect and also look great. Sold as a set for both sides.
Touratech Front Brake Caliper Protection Set Black BMW R1200GS LC + Adventure LC
€54.90*
Protects the brake caliper from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.- Made from 2 mm aluminum- Anodized black surface- Easy installation- Simple removal for maintenance- Custom-fit manufacturing
Similar Items
Touratech Crash Bars Stainless Steel Black for BMW R1250GS
€349.90*
No matter how the GS falls, the Touratech engine crash bar is there where it is needed. The most comprehensive all-round protection ever available for boxer engines!A "cage" made of 25mm thick, 2mm stainless steel pipes completely encloses the cylinders. Forces that occur are safely redirected and gently dissipated through effective distribution. Numerous mounting points and predetermined bending points ensure not only protection for the cylinders but also for the frame and engine of your R1250GS.Despite the impressive pipe diameters, the crash bar is mounted as close as possible to and symmetrically to the vehicle axis. It has virtually no impact on lean angle or ground clearance.It integrates perfectly into the look of the R1250GS, completing the overall appearance; it simply belongs!Made exclusively from robust stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their menace and can be easily sanded down.The mounting points are perfectly tailored to the R1250GS! Complete mounting materials are, of course, included in the delivery.In short:- complete protection of the cylinders, including rear and top- safe dissipation of occurring forces without damaging the frame and engine- no restrictions on lean angle or ground clearance- made from 25/2 mm stainless steel pipes- Made in GermanyFor combination with the Touratech cylinder protection 01-037-5130-0, 01-037-5131-0, and 01-037-5132-0, we recommend using 01-037-5169-0.Also fits with BMW "Option 719". Only the oil cap cannot be removed.
Touratech Hard Part Steering Stop Black for BMW R1250GS Adventure R1200GS Adventure LC
€119.90*
Even in minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts may also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.The stainless steel part is coated in black plastic powder.The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.Suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension".Suitable for special model R1250GS "HP" with special equipment "Sport Suspension".Not suitable for original BMW lowered suspension. Please use 01-045-5295-0 for that.- Weight: approx. 250 g- Dimensions: approx. 175 mm x 85 mm x 55 mm
Touratech Hard Part Steering Stop BMW R1250GS / R1200GS LC yellow
€119.90*
Even in minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts can also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.The stainless steel part is coated in yellow plastic powder.The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5298-0 for that.Not suitable for special model R1250GS "HP" with special equipment "Sport Suspension". Please use 01-045-5298-0 for that.- Weight: approx. 250 g- Dimensions: approx. 175 mm x 85 mm x 55 mm