Touratech Hard Part Steering Stop Black for BMW R1250GS Adventure R1200GS Adventure LC

BMW has been using water cooling for new boxer engines since 2013. This allows for optimal performance combined with high durability. Technically implemented perfectly, the system has only one weak point: the sensitive water cooler.The Touratech radiator guard protects the vulnerable fins of the cooler from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey becomes much safer with minimal effort!Visually understated yet unmistakably in the Touratech style, the radiator guard made of laser-cut, electropolished stainless steel integrates perfectly into the design of the GS.Material: electropolished stainless steel blackColor: silverScope of delivery: 2 parts (left and right)For tough off-road use, the radiator guard can additionally be secured with the included cable ties.Note: Covering the radiator can cause temperature problems for the engine under unfavorable conditions, at high outside temperatures, and at full load. Please pay attention to your water temperature gauge.

Take advantage of all the benefits of modern LED technology on your motorcycle!With the Touratech LED auxiliary headlights, you hit several birds with one stone:higher active safety- better illumination of the field of vision with a clear light-dark boundary - minimal light cone scattering in height, with fan-shaped illumination in width- improved contrasts due to white, daylight-like LED lighthigher passive safety- low power consumption, meaning that even with weak alternators or many consumers, the auxiliary headlights can be operated continuously- maintenance-free LED elements with an extremely long lifespan make replacement bulbs unnecessaryAll of this combined with a Touratech mount specifically tailored for the BMW GS!Scope of delivery:- Installation instructions- Wiring harness- vehicle-specific mount for headlights and control parts- 2x LED auxiliary headlights "Fog" with control partsNo registration required thanks to ECE and SAE approval!More safety through more light and innovative technology, better aesthetics of the motorcycle thanks to "adventure design," all in proven Touratech quality. You just have to ride it yourself!The headlights are very lightweight. Thanks to the special aluminum housing and the lens made of hardened plastic, they are still highly stable! They have a very low installation depth of only 55mm, which significantly simplifies installation without compromising the design.The LED technology has even more advantages: The excellent light output is made possible by the latest lighting technology and high-performance LEDs with increased efficiency. Power consumption is only 13 watts per headlight! (Halogen: ~55 watts)We use innovative LED headlights with a diameter of 70mm for our auxiliary headlights.

Even in minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts can also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.The stainless steel part is coated in black plastic powder.The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.Not suitable for special model R1250GS "HP" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.- Weight: approx. 250 g- Dimensions: approx. 175 mm x 85 mm x 55 mm

Protects the starter from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

Even with minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts may also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.The stainless steel part is coated in yellow plastic powder.The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.Suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension".Suitable for special model R1250GS "HP" with special equipment "Sport Suspension".Not suitable for original BMW lowered suspension. Please use 01-045-5297-0 for that.- Weight: approx. 250 g- Dimensions: approx. 175 mm x 85 mm x 55 mm

In rainy rides, the rear wheel often splashes dirt and water directly onto your boots and legs. These high-quality, super lightweight plastic parts prevent this effect and also look great. Sold as a set for both sides.

Protects the brake caliper from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.- Made from 2 mm aluminum- Anodized black surface- Easy installation- Simple removal for maintenance- Custom-fit manufacturing