Touratech Handlebar Risers 25mm Black for KTM 1050 1090 1190 Adventure 1290 Super Adventure
Product number:
1021-01-371-5255-0
Product information "Touratech Handlebar Risers 25mm Black for KTM 1050 1090 1190 Adventure 1290 Super Adventure"
Often, it's the little things that make the difference! This is also true for the Touratech handlebar riser for the KTM 1050, 1090, 1190, and 1290.
The 25 mm rise of the handlebars results in a more upright and significantly more relaxed seating position. The adjustment range of the handlebar angle is increased, which further enhances comfort.
Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages, especially for taller riders.
Overall, this leads to a noticeable increase in endurance and concentration. Long highway stretches lose their intimidation, and even fast and challenging sections off-road become easier to handle.
The simple installation can be completed in just a few minutes. No longer cables or brake lines are necessary!
Material: black anodized aluminum
The 25 mm rise of the handlebars results in a more upright and significantly more relaxed seating position. The adjustment range of the handlebar angle is increased, which further enhances comfort.
Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages, especially for taller riders.
Overall, this leads to a noticeable increase in endurance and concentration. Long highway stretches lose their intimidation, and even fast and challenging sections off-road become easier to handle.
The simple installation can be completed in just a few minutes. No longer cables or brake lines are necessary!
Material: black anodized aluminum
Login
Accessory Items
Touratech GPS Mounting Adapter over Instruments black for KTM 1050 1090 1190 Adventure + R
€89.90*
What good is the best GPS device if the mount breaks at the crucial moment! With our GPS mounting adapter, it is no longer a problem to install a GPS device in the cockpit of the Adventure, ready for the track.A sturdy stainless steel frame is securely bolted directly under the speedometer unit and withstands even the strongest vibrations. This frame supports the 12mm strut to which all Touratech GPS mounts can be attached. The position of the strut has been chosen as high as possible! You won't have to take your eyes off the track to look at the GPS, nor will the important instruments be covered.With mounting elements in black.
Touratech GPS Mounting Adapter over Instruments orange KTM 1190 Adventure R / 1190 Adventure
€89.90*
What good is the best GPS device if the mount breaks at the crucial moment! With our GPS mounting adapter, it is no longer a problem to install a GPS device in the cockpit of the Adventure, ready for the track.A sturdy stainless steel frame is securely bolted directly under the speedometer unit and withstands even the strongest vibrations. This frame supports the 12mm strut to which all Touratech GPS mounts can be attached. The position of the strut has been chosen to be as high as possible! You won't have to take your eyes off the track to look at the GPS, nor will the important instruments be covered.With mounting elements in KTM orange.
Touratech Brems- und Kupplunghebel einstellbar klapp- und längenverstellbar KTM 1050 Adv / 1090 Adv
€189.90*
Die Touratech Hebel werden aus hochfestem Aluminium wie im Flugzeugbau aus dem Vollen gefräst. Sie sind 6-fach verstellbar und klappbar. Das hat den Vorteil bei einem Umfaller, dass der Hebel hochklappen kann, ohne das er abbricht. Im Normalbetrieb sind die Hebel durch einen Mechanismus gegen hochklappen geschützt.Die Hebel sind in der Länge mittels Schwalbenschwanzverbindung um 35mm verstellbar. Die Eloxierung entspricht den höchsten Qualitätsnormen. Alle Schraubenverbindungen entsprechen der DIN Norm und werden vor Auslieferung mit dem Drehmomentschlüssel angezogen.Die CNC Hebel werden mit deutscher ABE (Allgemeine Betriebserlaubnis) ausgeliefert und sind somit eintragungsfrei.
Touratech Adjustable Short Brake and Clutch Levers for KTM 1050 Adv / 1090 Adv / R
€149.90*
CNC machined high-tech levers in a short version, approximately 17cm long, making them ideal for the so-called "two-finger brake system." High-strength aluminum (material: T6063 T6), which is also used in aircraft construction, machined from solid material, weight only about 250g (on both sides). We use a high-quality anodizing process that is tested for durability and corrosion resistance. The levers are adjustable in six increments from the handlebar using an adjustment lever.
Similar Items
Touratech Handlebar Center Brace 22/25 290 for Vehicles with Tube Handlebars, e.g. BMW K25 R1200GS + Adventure
€44.90*
Many enduros have been forgoing the handlebar cross brace for some time now.Even on many street motorcycles with high handlebars, a brace might be needed;for the installation of:- Roadbook holders- GPS devices- Motorcycle computers- Map bags- and moreWith our cross braces, we have filled this gap.No complicated handlebar change is required. The brace is simply bolted on afterwards. The braces are universally applicable to handlebars with a diameter of 22-28 mm - standard handlebars made of steel or aluminum and Magura or ProTaper handlebars that taper. Finally, something can be mounted on the handlebars again. The ideal solution for occasional use or for motorcycles with unstable handlebars.The brace is 290 mm long and anodized aluminum in its natural state.- does not fit BMW 1200GS with I-ABS 2, e.g., R1200GS ADV - year: 2007Also suitable for KTM Super Adventure S, R, T (from 2017)
Touratech Fairing Crash Bars Orange for KTM 1290 Super Adventure S / R from 2021
€329.90*
The ideal protection for the fairing of the KTM 1290 Super Adventure.The crash bar extension from Touratech offers optimal protection for the expensive plastic parts of the fairing. It fits both technically and visually perfectly on the original KTM crash bar of the Super Adventure. For all 1290 riders who use their motorcycle "properly," the crash bar extension is very sensible.A novel connection technology allows for a force-locking installation of the extension on the original bar. In the event of a fall, the forces that occur are distributed as effectively as possible. The tank fairing and ultimately the tank itself are safe.The design of the extension perfectly follows the visual line of the machine and gives it an individual appearance.Material: Stainless steel