Superseal 2-Pole Connector - Set Including Blind Plug
Product number:
1021-01-015-0090-0
Product information "Superseal 2-Pole Connector - Set Including Blind Plug"
The AMP SUPERSEAL 1.5 SERIES connectors have been developed to meet the higher technical demands for connectors in terms of waterproofing and reliability.
The AMP SUPERSEAL 1.5 SERIES connectors comply with the regulations of IEC 529 and DIN 40050 IP 67, making them suitable for use in the automotive industry, agriculture, and mechanical engineering. This system is also suitable for use with sensors.
Features:
waterproof up to IP 67
max. 14A
max. 24V DC
-40°C to +125°C
Insulation diameter 1.2-3.3mm FLR
Housing, PA 6.6 glass fiber reinforced, black
Secondary contact retention, PA 6.6 glass fiber reinforced, red
UL certified
Scope of delivery:
1x AMP Superseal socket housing 2-pole
1x AMP Superseal pin housing 2-pole
1x AMP Superseal blind plug 2-pole
3x AMP Superseal socket contact 0.75-1.5mm²
3x AMP Superseal pin contact 0.75-1.5mm²
4x AMP Superseal single wire seal yellow for outer diameter 1.8-2.4mm
4x AMP Superseal single wire seal green for outer diameter 1.4-1.7mm
The AMP SUPERSEAL 1.5 SERIES connectors comply with the regulations of IEC 529 and DIN 40050 IP 67, making them suitable for use in the automotive industry, agriculture, and mechanical engineering. This system is also suitable for use with sensors.
Features:
waterproof up to IP 67
max. 14A
max. 24V DC
-40°C to +125°C
Insulation diameter 1.2-3.3mm FLR
Housing, PA 6.6 glass fiber reinforced, black
Secondary contact retention, PA 6.6 glass fiber reinforced, red
UL certified
Scope of delivery:
1x AMP Superseal socket housing 2-pole
1x AMP Superseal pin housing 2-pole
1x AMP Superseal blind plug 2-pole
3x AMP Superseal socket contact 0.75-1.5mm²
3x AMP Superseal pin contact 0.75-1.5mm²
4x AMP Superseal single wire seal yellow for outer diameter 1.8-2.4mm
4x AMP Superseal single wire seal green for outer diameter 1.4-1.7mm
Login
Accessory Items
Power Cable BMW CAN-BUS with Open Ends
€29.90*
For connecting devices such as GPS units to the original BMW CAN-BUS connector.This adapter cable is connected to the optional device-specific power cable using the open wire ends (+/-).Alternatively, optionally available Superseal connectors (01-015-0090-0) can be installed.
Similar Items
Garmin Tread Bike & Car Set including Group Ride Tracker
€789.90*
The complete package to use the Garmin Tread on the motorcycle and in the car. The extensive features of the Garmin Tread are complemented by the lockable and vibration-dampened Touratech handlebar mount, as well as the car mount with suction cup and charging plug.The set consists of the following items:- Garmin Tread including Group Ride Tracker- TOURATECH lockable handlebar mount for Garmin Tread- Car mount with suction cup and charging plug- Screw set for RamMount spacers