EVO High Beam HeadlightThe tightly bundled light of the EVO high beam headlights has an exceptionally long range. This ensures that the field of vision is optimally illuminated, enhancing safety on and off the road. For the development of the new EVO headlights, SW-MOTECH sought a strong partner and relies on the expertise of a long-standing top manufacturer from the automotive sector. The focus of the development was on a compact design and meeting the highest quality standards: the EVO high beam headlights are waterproof and dustproof according to protection class IP69. The nearly wear-free LEDs of the premium headlights ensure excellent visibility for years.Maintenance-free operation due to nearly wear-free LED, significantly reduced power consumptionPower: 12 W per headlightLuminous flux: 800 LM per headlightECE approval mark: ECE R113 Rev.2Tightly bundled light, shining far into the distanceCompact size with a diameter of 7.1 cmWaterproof and dustproof (protection class: IP69)Voltage: 12 V. Wiring harness for easy connection to the motorcycle battery is included, no modifications to the motorcycle's electrical system requiredSpray-proof and blue illuminated handlebar switch for comfortable operation (protection class: IPX4)Mounting points on all four sidesMounting on headlight clamps for crash bars (Ø 22, 26, 27, 28 mm) or on model-specific bracketsScope of Delivery2 x EVO high beam headlights1 x handlebar switchInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.3 kgNotePlease note that the "TOP" marking must always be at the top due to the curvature of the reflector.Headlight clamps for crash bars and model-specific brackets are available separatelyPlease observe the legal regulations applicable in your country for the operation and installation of high beam headlights.Required for InstallationCrash bar clamps or model-specific headlight mountsApproval NoteThe headlights have an ECE approval mark (ECE R113 Rev.2).The ECE numbers allow installation without additional approval from a testing institute such as TÜV or DEKRA.The regulations for the lighting to be installed on the motorcycle are, at the national level in the Federal Republic of Germany, the StVZO (§ 50) and at the European level, the Directive 93/92 EEC on lighting and signaling devices on two- or three-wheeled vehicles. These state, among other things:- The installation of two headlights for high beam is permitted.- With two headlights for high beam, the distance between the two illuminated surfaces must not be greater than 200 mm.- White light must shine forward and red light must shine backward; yellow light may be used on the sides.- Paired lights must be symmetrically mounted to the vehicle center and at the same height.- The luminous intensity of the lamps must be equal.- The high beam must not be operated simultaneously with the fog light.The regulations for approval in the respective country must be clarified before purchasing the product.