Hand Protector Guard KitThe attachment of the closed aluminum bars is done at the handlebar inner threads and handlebar tube, meeting the highest standards.Protects the original hand protector and turn signalScope of Delivery2 x Hand Protector GuardsInstallation instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.0 kg

KOBRA Handguard KitThe attachment of the closed aluminum bars is done at the handlebar inner threads and handlebar and meets the highest standards.The sturdy aluminum bars of the KOBRA handguards protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA handguards can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA handguard. It integrates seamlessly into the overall look, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the handguards.Model-specific mounting kit with aluminum bars for particularly robust two-point mountingModern design, seamlessly integrates into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells on the aluminum barsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA handguard shells, left and right1 x Barkbusters handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / silverTotal weight: approx. 1.4 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

Model-specific mounting kit with aluminum brackets for robust two-point mountingHandguard Mounting KitModel-specific mounting kit with aluminum brackets for particularly robust two-point mountingCompatible with KOBRA or BBSTORM handguard shellsProtection for levers and handsEasy mounting of the hand shells to the aluminum bracketsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.1 kgWidth mounted on motorcycle: 106.0 cmNoteThe delivery includes only the aluminum brackets for the right and left side. The KOBRA or BBSTORM handguard shells are available separately.KOBRA Handguard ShellsHand shells made of impact-resistant Moplen plasticEasy screwing of the handguards to KOBRA mounting kitsModern design, seamlessly integrates into the look of the motorcycleProtection for levers and hands in off-road conditions and against weather influencesDetailsMaterial: MoplenColor: blackTotal weight: approx. 0.2 kgNoteThe delivery includes only two KOBRA hand shells. A separately available KOBRA handguard mounting kit is required for attachment.Scope of delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.4 kg

KOBRA Hand Protector KitThe attachment of the closed aluminum bars is done at the handlebar inner threads and handlebar tube, meeting the highest standards.The sturdy aluminum bars of the KOBRA hand protectors protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA hand protectors can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA hand protector. It integrates seamlessly into the overall look, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the hand protectors.Model-specific mounting kit with aluminum bars for particularly robust two-point mountingModern design, seamlessly integrates into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells to the aluminum barsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

KOBRA Hand Protector KitThe sturdy aluminum brackets of the KOBRA hand protectors protect levers and riders in the event of accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.The sturdy aluminum brackets of the KOBRA hand protectors protect levers and riders in the event of accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA hand protectors can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA hand protector. It integrates seamlessly into the design, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the hand protectors.Sturdy closed aluminum framePoint mountingModern design, integrates seamlessly into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells to the aluminum bracketsHand shells made of impact-resistant Moplen plasticKOBRA Hand Protector ShellsHand shells made of impact-resistant Moplen plasticSimple screwing of the hand protectors to KOBRA mounting kitsModern design, integrates seamlessly into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesDetailsMaterial: MoplenColor: blackTotal weight: approx. 0.2 kgNoteThe delivery includes only two KOBRA hand shells. A separately available KOBRA hand protector mounting kit is required for attachment.Hand Protector Mounting KitCompatible with KOBRA or BBSTORM hand protector shellsProtection for levers and handsEasy mounting of the hand shells to the aluminum bracketsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.0 kgNoteThe delivery includes only the aluminum brackets for the right and left sides. The KOBRA or BBSTORM hand protector shells are available separately.Scope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightInstallation instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.4 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.2 kg

KOBRA Handguard KitThe sturdy aluminum brackets of the KOBRA handguards protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA handguards can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA handguard. It integrates seamlessly into the design, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the handguards.For mounting on handlebar internal thread 6mm / 8mmTwo-point mountingModern design, integrates seamlessly into the motorcycle's aestheticsProtection for levers and hands off-road and against weather influencesEasy mounting of the hand shells on the aluminum bracketsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightInstallation instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kg

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kg

KOBRA Handguard KitThe attachment of the closed aluminum brackets is done at the handlebar inner threads and handlebar and meets the highest standards.The sturdy aluminum brackets of the KOBRA handguards protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA handguards can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA handguard. It integrates seamlessly into the overall look, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the handguards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingModern design, seamlessly integrates into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells to the aluminum bracketsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.