Adventure Hand Protector Shell SetThe Adventure hand shells have a closed shape with increased lateral coverage. The impact-resistant plastic is flexible and provides excellent protection against wind, cold, or branches and bushes during off-road rides. The distinctive design of the shells with a matte black surface gives your bike a special look. If necessary, damaged shells can be easily replaced.The Adventure hand shells are screwed onto the aluminum bars of the hand protector mounting kits with just a few simple steps. For even more protection, separately available crash pads and the extension set for the hand shells are available.Closed shape with lateral coverageImpact-resistant plastic protects against wind, weather, and bushesDistinctive design with matte black surfaceAdditional protection with separately available CRASH PAD SETMore weather protection with separately available EXTENSION SETScope of Delivery1 x Adventure Hand Protector Shell SetInstallation instructionsMounting materialsDetailsMaterial: PlasticColor: BlackTotal weight: Approx. 0.3 kgNoteNot compatible with KOBRA or BB STORM mounting kits.

Adventure Handguard KitWhether on the road or off-road: The Adventure Handguard Kit protects the handlebar controls of your bike in case of falls and your hands from weather conditions as well as stone impacts and branches. The base consists of a sturdy aluminum bracket to which the Adventure hand shells are attached. The impact-resistant polypropylene plastic of the shells is flexible and offers excellent protection against wind and weather; during off-road rides, the hands are protected from stone impacts and contact with branches and bushes. The elegant shells with a matte black finish provide a striking look for your bike. Thanks to the closed shape of the Adventure hand shells, the handlebars and hands are also covered on the sides. For even more protection, the separately available crash pad set can be attached to the handguards. The extension set, which increases the protective area of the Adventure hand shells, provides additional weather protection.Simple two-point mounting without special toolsModel-specific aluminum bracket with high-quality powder coatingReliable protection of the handlebar controls in case of fallsAdventure hand shells made of impact-resistant plastic protect against weather, stone impacts, and branchesElegant, aerodynamic design, matte black finish.Additional protection with separately available CRASH PAD SETMore weather protection with separately available EXTENSION SETScope of Delivery1 x Handguard Mounting Kit1 x Handguard Kit Supplement1 x Adventure Handguard Shell SetInstallation instructionsMounting materialsDetailsMaterial: Plastic / AluminumColor: black / blackTotal weight: approx. 1.8 kgNoteAluminum bracket is not compatible with KOBRA or BBSTORM handguard shells.

Barkbusters STORM Handguard KitsSTORM handguards are suitable for street machines, adventure bikes, naked bikes, and scooters. The one-point mounting system allows for a high level of protection with easy installation. The handguard kit includes the plastic shells, the appropriate aluminum frames, and the mounting materials. The STORM handguards offer a particularly large protective area, providing good protection against weather conditions.Fits 22 mm handlebarsOne-point attachmentEspecially large protective areaProtection against weather conditionsFor hollow handlebarsScope of Delivery1 x Barkbusters STORM Handguard KitsInstallation instructionsMounting materialsDetailsColor: blackTotal weight: approx. 0.6 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Crash Pad Set for Adventure ShellsThe solid crash pads made of PP plastic provide additional protection for the Adventure handguards in the event of falls and tip-overs, and together with the aluminum brackets and the Adventure handguard shells, they ensure even more robust and reinforced protection. The crash pads are precisely placed at the point where the motorcycle first makes contact with the ground in the event of a fall. The durable and abrasion-resistant material protects both the hand shells and the aluminum bracket in case of an emergency. The crash pads, designed to match the Adventure handguard shells, further emphasize the Adventure look. If necessary, damaged crash pads can be easily replaced.Crash pads for existing Adventure handguard shellsProvides additional protection in case of falls and tip-oversEasy installation due to precise constructionScope of Delivery1 x Crash Pad Set for Adventure ShellsInstallation instructionsMounting materialsDetailsColor: blackTotal weight: approx. 0.1 kgNoteNot compatible with KOBRA, BBSTORM, or Sport handguard shells.

Extension Set for Adventure HandguardsThis extension made of impact-resistant plastic enlarges the protective area of the Adventure handguards. The extension is attached with two screws to the upper edge of the handguard shells. It integrates seamlessly in appearance and offers more protection for the hands against wind and weather.Extension for existing Adventure handguard shellsProvides additional protection against wind and weather influencesScope of Delivery1 x Extension Set for Adventure HandguardsInstallation instructionsMounting materialsDetailsMaterial: PlasticColor: BlackTotal weight: Approx. 0.1 kgNoteNot compatible with KOBRA, BBSTORM, or Sport handguard shells.

Hand Protector Guard KitThe attachment of the closed aluminum bars is done at the handlebar inner threads and handlebar tube, meeting the highest standards.Protects the original hand protector and turn signalScope of Delivery2 x Hand Protector GuardsInstallation instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.0 kg

Barkbusters Handguard Mounting KitThe mounting kits for handguards include the aluminum frames and the mounting materials for attaching the handguards to the motorcycle's handlebars. They can be combined with the appropriate plastic shells.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of Delivery2 x Aluminum bracketsMounting instructionsMounting materialsDetailsMaterial: AluminumColor: silverTotal weight: approx. 1.1 kg

Barkbusters Handguard Mounting KitClosed aluminum brackets with a durable two-point connection for the upper side and front fork bridge clamp bolts.The mounting kits for handguards include the aluminum frames and the mounting materials for attaching the handguards to the motorcycle's handlebars. They can be combined with the appropriate plastic shells.Model-specific mounting kit with aluminum brackets for particularly durable two-point mountingFor upper side and front fork bridge clamp boltsScope of Delivery2x aluminum bracketsMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: silverTotal weight: approx. 1.4 kgNoteNot suitable for Husqvarna (from 2013), KTM, or Husaberg.

Barkbusters Handguard Mounting KitThe mounting kits for handguards include the aluminum frames and the mounting materials for attaching the handguards to the motorcycle's handlebars. They can be combined with the appropriate plastic shells.Complete mounting materials (without shells)Scope of Delivery1 x Barkbusters Handguard Mounting KitInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: silverOverall weight: approx. 0.9 kg

Barkbusters Handguard Mounting KitThe mounting kits for handguards include the aluminum frames and the mounting materials for attaching the handguards to the motorcycle's handlebars. They can be combined with the appropriate plastic shells.Complete mounting materials (without shells)Scope of Delivery1 x Barkbusters Handguard Mounting KitInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: SilverTotal weight: Approx. 1.4 kg

Handguard Mounting KitThe robust two-point connection of the closed aluminum brackets is made to the handlebar inner threads and handlebar, meeting the highest standards.The stable aluminum brackets of the KOBRA and BBSTORM handguards protect levers and riders in accidents and falls, while the separately available hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and during off-road riding.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingCompatible with KOBRA or BBSTORM handguard shellsProtection for levers and handsEasy mounting of the hand shells to the aluminum bracketsScope of Delivery1 x Handguard Mounting Kit, left and rightMounting instructionsMounting materialsDetailsMaterial: AluminumColor: SilverTotal weight: Approx. 1.0 kgNoteThe delivery only includes the aluminum brackets for the right and left side. The KOBRA or BBSTORM handguard shells are available separately.

These mounting kits include a sturdy aluminum bracket and the mounting materials for attaching the handguards to the motorcycle's handlebars. The brackets protect the rider's levers and hands in the event of accidents and falls. They can be combined with the separately available ADVENTURE and SPORT handguard shells made of impact-resistant polypropylene plastic. These provide additional protection against weather, stone chips, and during off-road riding. The high-quality mounting elements impress with their integrative design, thoughtful execution, and detail-optimized construction.Includes sturdy bracket made of powder-coated aluminumVibration-dampening handlebar end caps made of steelEasy installation on the handlebars due to vehicle-specific designCompatible with ADVENTURE and SPORT handguard shellsProtection for levers and handsScope of Delivery1 x Installation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.1 kgNoteThe delivery includes only the aluminum brackets along with mounting materials for the right and left sides. The ADVENTURE and SPORT handguard shells are available separately.Not compatible with KOBRA or BBSTORM handguard shells.

Barkbusters Handguard Mounting KitThe robust two-point connection of the closed aluminum bars is made to the handlebar inner threads and handlebar tube, meeting the highest standards.The mounting kits for handguards include the aluminum frames and the mounting materials for attaching the handguards to the motorcycle's handlebars. They can be combined with the appropriate plastic shells.Model-specific mounting kit with aluminum bars for particularly robust two-point mountingScope of Delivery1 x Barkbusters Handguard Mounting Kit, left and rightInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: silverTotal weight: approx. 1.1 kg

Handlebar End MountsFor handlebars with a 12 mm inner diameterScope of Delivery2 x Handlebar End MountsInstallation instructionsDetailsTotal weight: approx. 0.1 kg

KOBRA Handguard KitThe attachment of the closed aluminum bars is done at the handlebar inner threads and handlebar and meets the highest standards.The sturdy aluminum bars of the KOBRA handguards protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA handguards can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA handguard. It integrates seamlessly into the overall look, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the handguards.Model-specific mounting kit with aluminum bars for particularly robust two-point mountingModern design, seamlessly integrates into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells on the aluminum barsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA handguard shells, left and right1 x Barkbusters handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / silverTotal weight: approx. 1.4 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.4 kg

Model-specific mounting kit with aluminum brackets for robust two-point mountingHandguard Mounting KitModel-specific mounting kit with aluminum brackets for particularly robust two-point mountingCompatible with KOBRA or BBSTORM handguard shellsProtection for levers and handsEasy mounting of the hand shells to the aluminum bracketsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.1 kgWidth mounted on motorcycle: 106.0 cmNoteThe delivery includes only the aluminum brackets for the right and left side. The KOBRA or BBSTORM handguard shells are available separately.KOBRA Handguard ShellsHand shells made of impact-resistant Moplen plasticEasy screwing of the handguards to KOBRA mounting kitsModern design, seamlessly integrates into the look of the motorcycleProtection for levers and hands in off-road conditions and against weather influencesDetailsMaterial: MoplenColor: blackTotal weight: approx. 0.2 kgNoteThe delivery includes only two KOBRA hand shells. A separately available KOBRA handguard mounting kit is required for attachment.Scope of delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.4 kg

KOBRA Hand Protector KitThe attachment of the closed aluminum bars is done at the handlebar inner threads and handlebar tube, meeting the highest standards.The sturdy aluminum bars of the KOBRA hand protectors protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA hand protectors can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA hand protector. It integrates seamlessly into the overall look, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the hand protectors.Model-specific mounting kit with aluminum bars for particularly robust two-point mountingModern design, seamlessly integrates into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells to the aluminum barsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

KOBRA Hand Protector KitThe sturdy aluminum brackets of the KOBRA hand protectors protect levers and riders in the event of accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.The sturdy aluminum brackets of the KOBRA hand protectors protect levers and riders in the event of accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA hand protectors can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA hand protector. It integrates seamlessly into the design, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the hand protectors.Sturdy closed aluminum framePoint mountingModern design, integrates seamlessly into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells to the aluminum bracketsHand shells made of impact-resistant Moplen plasticKOBRA Hand Protector ShellsHand shells made of impact-resistant Moplen plasticSimple screwing of the hand protectors to KOBRA mounting kitsModern design, integrates seamlessly into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesDetailsMaterial: MoplenColor: blackTotal weight: approx. 0.2 kgNoteThe delivery includes only two KOBRA hand shells. A separately available KOBRA hand protector mounting kit is required for attachment.Hand Protector Mounting KitCompatible with KOBRA or BBSTORM hand protector shellsProtection for levers and handsEasy mounting of the hand shells to the aluminum bracketsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.0 kgNoteThe delivery includes only the aluminum brackets for the right and left sides. The KOBRA or BBSTORM hand protector shells are available separately.Scope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightInstallation instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.4 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of Delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.2 kg

KOBRA Handguard KitThe sturdy aluminum brackets of the KOBRA handguards protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA handguards can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA handguard. It integrates seamlessly into the design, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the handguards.For mounting on handlebar internal thread 6mm / 8mmTwo-point mountingModern design, integrates seamlessly into the motorcycle's aestheticsProtection for levers and hands off-road and against weather influencesEasy mounting of the hand shells on the aluminum bracketsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightInstallation instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kg

The attachment of the closed aluminum brackets is done to the handlebar inner threads and handlebar tube, meeting the highest standards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingScope of delivery2 x KOBRA hand protector shells, left and right1 x hand protector mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kg

KOBRA Handguard KitThe attachment of the closed aluminum brackets is done at the handlebar inner threads and handlebar and meets the highest standards.The sturdy aluminum brackets of the KOBRA handguards protect levers and riders in accidents and falls, while the interchangeable hand shells made of impact-resistant polypropylene plastic provide additional protection against weather, stone chips, and off-road riding.Even more protection and safety!The protective area of the KOBRA handguards can be enlarged if necessary with optional EXTENSIONS made of impact-resistant plastic. The extension is screwed onto the upper edge of the KOBRA handguard. It integrates seamlessly into the overall look, but offers significantly more protection for the hands against wind and weather, as it increases the protective area by another 50%.Increased visibility in traffic is provided by separately available LED TURN SIGNALS, which can be easily inserted into the cutouts of the handguards.Model-specific mounting kit with aluminum brackets for particularly robust two-point mountingModern design, seamlessly integrates into the motorcycle's aestheticsProtection for levers and hands in off-road conditions and against weather influencesEasy mounting of the hand shells to the aluminum bracketsHand shells made of impact-resistant Moplen plasticScope of Delivery2 x KOBRA handguard shells, left and right1 x handguard mounting kit, left and rightMounting instructionsMounting materialsDetailsMaterial: Moplen / AluminumSurface: powder-coatedColor: black / blackTotal weight: approx. 1.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.