Brake Fluid Reservoir ProtectorThe compact brake fluid reservoir protector shields the original brake fluid reservoir from stone chips and simultaneously prevents the unwanted removal of the cap. The protector can be easily attached to the motorcycle with just a few hand movements.High-quality appearance and workmanshipProtection of the original brake fluid reservoir from stone chipsPrevents the unwanted removal of the capScope of Delivery1 x Brake Fluid Reservoir ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: blackOverall weight: approx. 0.1 kg

Brake Pump ProtectorSW-MOTECH manufactures this brake pump protector specifically for the Harley-Davidson Pan America.The protector, made from bent and laser-cut aluminum, protects the foot brake cylinder - even from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: Powder-coatedColor: BlackTotal weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - even from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: brushedColor: silverTotal weight: approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder of the Yamaha Ténéré 700 - also from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmColor: silverTotal weight: approx. 0.1 kg

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - also from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: powder-coatedColor: blackTotal weight: approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - even from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - also from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: brushedColor: silverTotal weight: approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it also does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Screen ReinforcementThe screen reinforcement from SW-MOTECH increases the contact area and provides additional stability to the GS windscreen. Fluttering and rattling noises of the windscreen are noticeably reduced, and vibration cracks are prevented. The screen reinforcement can be easily attached to the original mounts, and all adjustment options remain intact.Stabilizes the windscreenReduces vibration and noiseCompatible with original windscreen or screens from other manufacturersAdjustment options of the screen remain intactEasy installation on original mountsCan also be mounted in conjunction with BMW or SW-MOTECH navigation holdersScope of Delivery1 x Screen ReinforcementInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 0.5 kg

Engine Case Cover ProtectionSet of machined protectors made from high-strength aluminum alloy for alternator and clutch covers. The elegant design provides extra protection for exposed areas in case of ground contact, stone impacts, or in the event of a fall.Protection of the clutch cover and alternator coverExclusively developed for the KTM 790 DukeNo impact on handlingCNC machined for precise fit and appealing aestheticsEasy installation at original mounting points on the caseMade from high-strength aluminum alloy with weather-resistant anodizingScope of Delivery1 x Clutch Cover Protection, right1 x Alternator Cover Protection, leftInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal weight: Approx. 0.4 kg

Heel ProtectorWell protected: This heel protector prevents contact with the hot exhaust or the chain and protects against the movements of the swingarm.For installation on the left and right sideProtection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific development for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery2 x Heel ProtectorsInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal weight: Approx. 0.3 kg

Heel ProtectorWell protected: This heel protector prevents contact with the hot exhaust or the chain and protects against the movements of the swingarm.For mounting on the left and right sideProtection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific development for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery2 x Heel ProtectorsInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal weight: Approx. 0.3 kg

Heel GuardWell protected: This heel guard prevents contact with the hot exhaust or the chain and protects against the movements of the swingarm.For installation on the left and right sideProtection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific design for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery2 x Heel GuardsInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.60 cmSurface: AnodizedColor: BlackTotal weight: Approx. 0.3 kg

Injector Nozzle Cover SetThe cover can protect the injector nozzle of your BMW R nineT from damage and is screwed onto the existing mounting points on the vehicle. Specifically designed to fit the shape of the boxer engine, the cover can also be installed in conjunction with the cylinder protection MSS.07.653.10000/S. Installation without the SW-MOTECH cylinder protection, as well as with the machined original BMW valve covers, is also possible. For filling the engine with oil at the right cylinder, the injector nozzle cover can remain on the motorcycle.For the construction of the injector nozzle cover, we use laser-cut and brushed aluminum sheet and components made from CNC-machined black anodized aluminum.Set with two covers for both sides of the boxer engineProtection of the injector nozzleCNC-machined and laser-cut aluminum componentsScope of Delivery1 x Injector Nozzle Cover SetInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: silverTotal weight: approx. 0.3 kg

Heel GuardWell protected: This heel guard prevents contact with the hot exhaust or chain and protects against the movements of the swingarm.For installation on the left sideFor Harley-Davidson Pan AmericaProtection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific design for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery1 x Heel Guard, left sideInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: AnodizedColor: BlackTotal weight: Approx. 0.1 kg

Left Heel GuardWell protected: This heel guard prevents contact with the hot exhaust or the chain and protects against the movements of the swingarm.For installation on the left sideFor Triumph Tiger 900 modelsProtection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific development for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery1 x Left Heel Guard, left sideInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.60 cmSurface: AnodizedColor: BlackTotal weight: Approx. 0.1 kg

Heel GuardWell protected: This heel guard prevents contact with the hot exhaust or the chain and protects against the movements of the swingarm.Protection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific design for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery1 x Heel Guard, left sideInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: brushedColor: silverTotal weight: approx. 0.1 kg

Protection for EVO HeadlightsThe protector made of powder-coated steel protects the housing of the EVO headlights from SW-MOTECH and gives your machine an adventure look. It is mounted directly on the headlight with just two screws.Compatible with EVO main and auxiliary headlights from SW-MOTECHProtection of the headlight housingEasy attachment of the protector to the headlight's mountingMade of corrosion-resistant and powder-coated steelWith laser-etched SW-MOTECH logoScope of Delivery2 x Protection for EVO HeadlightsInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 0.2 kg

Headlight Protector with GuardThe protector made of brushed stainless steel protects the housing of the EVO headlights from SW-MOTECH and gives your machine an adventure look. It is mounted directly to the headlight with just two screws. The delivery includes two protectors and mounting materials.The headlight guard, designed to match the retro look of the motorcycle, protects against stone chips and larger foreign objects. The steel guard can be easily attached to the original headlight holder of the motorcycle, and a black powder coating prevents scratches and corrosion.Compatible with EVO main and auxiliary headlights from SW-MOTECHProtection of the headlight housingEasy attachment of the guard to the headlight's mounting screwsMade of corrosion-resistant stainless steelElegant appearance with brushed surfaceWith engraved SW-MOTECH bull logoHeadlight guard in retro designProtection against stone chips and flying objectsEasy installation on the original headlight holderDelivery Contents2 x Headlight protector with guardInstallation instructionsMounting materialsDetailsMaterial: Stainless steelColor: SilverTotal weight: Approx. 0.2 kgNoteNot approved in the area of the StVZOApproval NoteThe regulations for approval in the respective country must be clarified before purchasing the product.

Right Heel GuardWell protected: This heel guard prevents contact with the hot exhaust or chain and protects against the movements of the swingarm.For replacement of the original heel guard on the right sideFor Triumph Tiger 900 modelsProtection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific development for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsDelivery Scope1 x Right Heel GuardInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial Thickness: 0.60 cmSurface: AnodizedColor: BlackTotal Weight: Approx. 0.1 kg

Heel ProtectorWell protected: This heel protector prevents contact with the hot exhaust or chain and protects against the movements of the swingarm.Protection of the motorcycle boot from contact with the hot exhaust, the chain, or movements of the swingarmModel-specific design for optimal shape and sizeAesthetically pleasing and high-quality workmanshipEasy installation on existing mounting pointsScope of Delivery1 x Heel Protector, right sideInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: brushedColor: silverTotal weight: approx. 0.1 kg

Water Pump ProtectorThe protector, designed to match the appearance of the motorcycle, can protect the water pump from damage in the event of unwanted ground contact. The water pump protector is made from high-strength aluminum alloy and can be quickly and easily mounted at the original attachment points.Effective protection for the water pump located on the left sideCNC machined from high-strength aluminum alloySolid construction and easy installation at original mounting pointsDesigned by SW-MOTECH to match the appearance of the motorcycleScope of Delivery1 x Water Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.2 kg