Crash Pad Kit for Rear AxleThe crash pad is precisely designed for BMW models with a single-sided swingarm.The crash pads for the rear axle made of abrasion-resistant plastic protect the swingarm from damage in the event of a fall. With a fiberglass content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished red bull logo adds a visual highlight to your motorcycle.Protection of the swingarmDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersScope of Delivery1 x Crash Pad Kit for Rear AxleInstallation instructionsMounting materialsDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Adventure Hand Protector Shell SetThe Adventure hand shells have a closed shape with increased lateral coverage. The impact-resistant plastic is flexible and provides excellent protection against wind, cold, or branches and bushes during off-road rides. The distinctive design of the shells with a matte black surface gives your bike a special look. If necessary, damaged shells can be easily replaced.The Adventure hand shells are screwed onto the aluminum bars of the hand protector mounting kits with just a few simple steps. For even more protection, separately available crash pads and the extension set for the hand shells are available.Closed shape with lateral coverageImpact-resistant plastic protects against wind, weather, and bushesDistinctive design with matte black surfaceAdditional protection with separately available CRASH PAD SETMore weather protection with separately available EXTENSION SETScope of Delivery1 x Adventure Hand Protector Shell SetInstallation instructionsMounting materialsDetailsMaterial: PlasticColor: BlackTotal weight: Approx. 0.3 kgNoteNot compatible with KOBRA or BB STORM mounting kits.

Adventure Handguard KitWhether on the road or off-road: The Adventure Handguard Kit protects the handlebar controls of your bike in case of falls and your hands from weather conditions as well as stone impacts and branches. The base consists of a sturdy aluminum bracket to which the Adventure hand shells are attached. The impact-resistant polypropylene plastic of the shells is flexible and offers excellent protection against wind and weather; during off-road rides, the hands are protected from stone impacts and contact with branches and bushes. The elegant shells with a matte black finish provide a striking look for your bike. Thanks to the closed shape of the Adventure hand shells, the handlebars and hands are also covered on the sides. For even more protection, the separately available crash pad set can be attached to the handguards. The extension set, which increases the protective area of the Adventure hand shells, provides additional weather protection.Simple two-point mounting without special toolsModel-specific aluminum bracket with high-quality powder coatingReliable protection of the handlebar controls in case of fallsAdventure hand shells made of impact-resistant plastic protect against weather, stone impacts, and branchesElegant, aerodynamic design, matte black finish.Additional protection with separately available CRASH PAD SETMore weather protection with separately available EXTENSION SETScope of Delivery1 x Handguard Mounting Kit1 x Handguard Kit Supplement1 x Adventure Handguard Shell SetInstallation instructionsMounting materialsDetailsMaterial: Plastic / AluminumColor: black / blackTotal weight: approx. 1.8 kgNoteAluminum bracket is not compatible with KOBRA or BBSTORM handguard shells.

Adventure Set ProtectionThe Adventure Set Protection includes all the essential protective components for the Ducati Multistrada V4.Ready for any adventure: the protective parts of this Adventure Set provide you and your bike with an extra layer of protection in case of a fall and during off-road rides. The model-specific protectors impress with their optimal fit. They can be easily mounted at the original attachment points and blend seamlessly into the motorcycle's appearance. Treat yourself and your machine to that extra protection!Crash BarsConstruction made of robust steel with a 22 mm tube diameterWeather and corrosion-resistant powder coating in blackReliable protection for important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame attachment pointsDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 6.4 kgEngine GuardUnderbody protection against stone impacts and collisionsProvides more protection through secure and stable attachment pointsDurable and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting materials includedRobust design made of high-quality aluminum alloyDetailsMaterial: AluminumSurface: brushedColor: silverTotal weight: approx. 2.9 kgCrash Pad Kit for Rear AxleProtection of the swingarmDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.3 kgCrash Pad Kit for Front AxleProtection of the forkDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.3 kgDelivery Contents2 x Crash Bars, steel, black1 x Engine Guard, aluminum, silver1 x Crash Pad Kit for Rear Axle, PA6 Ertalon, black1 x Crash Pad Kit for Front Axle, PA6 Ertalon, blackInstallation instructionsMounting materialsDetailsTotal weight: approx. 10.9 kg

Adventure Set ProtectionThe Adventure Set Protection includes all the essential protective components for the Kawasaki KLR 650.Ready for any adventure: the protective parts of this Adventure Set provide you and your bike with an extra layer of protection in case of a fall and during off-road rides. The model-specific protectors impress with their optimal fit. They can be easily mounted at the original attachment points and blend seamlessly into the motorcycle's appearance. Treat yourself and your machine to that extra protection!Crash BarsConstruction made of robust steel with a 27 mm tube diameterWeather and corrosion-resistant powder coating in blackReliable protection for important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame attachment pointsDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 6.8 kgEngine GuardUnderbody protection against stone impacts and collisionsDurable and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting material includedRobust design made of high-quality aluminum alloyDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: brushedColor: silverTotal weight: approx. 1.9 kgNot compatible withDoes not fit in conjunction with the original crash bars of the KLR 650.Hand Protector Mounting KitModel-specific mounting kit with aluminum brackets for particularly durable two-point mountingCompatible with KOBRA or BBSTORM hand protector shellsProtection for levers and handsEasy installation of the hand shells on the aluminum bracketsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.1 kgWidth mounted on motorcycle: 106.0 cmNoteThe delivery only includes the aluminum brackets for the right and left side. The KOBRA or BBSTORM hand protector shells are available separately.KOBRA Hand Protector ShellsHand shells made of impact-resistant Moplen plasticEasy bolting of the hand protectors to KOBRA mounting kitsModern design, blends seamlessly into the motorcycle's appearanceProtection for levers and hands in off-road conditions and against weather influencesDetailsMaterial: MoplenColor: blackTotal weight: approx. 0.2 kgNoteThe delivery only includes two KOBRA hand shells. A separately available KOBRA hand protector mounting kit is required for attachment.Scope of Delivery2 x Crash Bars, Steel, Black1 x Engine Guard, Aluminum, Silver2 x KOBRA Hand Protectors, Moplen, BlackMounting instructionsMounting materialDetailsTotal weight: approx. 10.7 kg

Adventure Set ProtectionThe Adventure Set Protection includes all the essential protective components for the Triumph Tiger 660.Ready for any adventure: the protective parts of this Adventure Set provide you and your bike with an extra layer of protection in case of a fall and during off-road rides. The model-specific manufactured protectors impress with their optimal fit. They can be easily mounted at the original attachment points and blend seamlessly into the motorcycle's appearance. Treat yourself and your machine to that extra protection!Crash BarsConstruction made of robust steel with a 27 mm pipe diameterWeather and corrosion-resistant powder coating in blackReliable protection for important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame attachment pointsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 3.1 kgEngine ProtectionUnderbody protection made of 4 mm and black side walls made of 2.5 mm thick aluminumUnderbody protection against stone impacts and collisionsDurable and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting material includedRobust design made of high-quality aluminum alloyDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgCrash Pad Kit for Front AxleProtection for the forkDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of glass-fiber reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: BlackTotal weight: Approx. 0.3 kgCrash Pad Kit for Rear AxleProtection for the swingarmDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of glass-fiber reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: BlackTotal weight: Approx. 0.3 kgDelivery Contents2 x Crash Bars, Steel, Black2 x Engine Protection, Aluminum, Black2 x Crash Pad Kit for Front Axle, PA6 Ertalon, Black2 x Crash Pad Kit for Rear Axle, PA6 Ertalon, BlackInstallation instructionsMounting materialDetailsTotal weight: Approx. 5.4 kg

Adventure Set ProtectionThe Adventure Set Protection includes all the essential protective components for the Yamaha MT-09 Tracer.Ready for any adventure: the protective parts of this Adventure Set provide you and your bike with an extra layer of protection in case of a fall and during off-road rides. The model-specific protectors impress with their optimal fit. They can be easily mounted at the original attachment points and blend seamlessly into the motorcycle's appearance. Treat yourself and your machine to that extra protection!Crash BarsConstruction from robust steel with a 27 mm tube diameterWeather and corrosion-resistant powder coating in blackReliable protection of important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame attachment pointsDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 3.2 kgEngine Cover ProtectionReliable protection of the left engine coverTwo-part, the upper part serves as a sliding padNo impact on riding behaviorCNC machined for precise fit and appealing appearanceEasy installation at original attachment points on the coverMade from high-strength aluminum alloy with weather-resistant anodizingDetailsMaterial: Aluminum / AluminumSurface: anodized / anodizedColor: silver / blackTotal weight: approx. 0.3 kgNot compatible withDoes not fit in conjunction with alternator cover protectionEngine ProtectionGood ventilation through surrounding air intakesCan be installed without drilling and weldingDurable and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting material includedRobust design made from high-quality aluminum alloyDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: brushedColor: silverTotal weight: approx. 1.1 kgNot compatible withFront spoiler MSS.06.471.10000/B. Akrapovic exhaust system.Crash Pad Kit for Front AxleProtection of the forkDiscreet sliding pad made from abrasion-resistant polyamideRobust core made from glass-fiber reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.3 kgCrash Pad Kit for Rear AxleProtection of the swingarmDiscreet sliding pad made from abrasion-resistant polyamideRobust core made from glass-fiber reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.3 kgScope of Delivery2 x Crash Bars, steel, black1 x Engine Cover Protection, aluminum, silver1 x Engine Protection, aluminum, silver1 x Crash Pad Kit for Front Axle, PA6 Ertalon, black1 x Crash Pad Kit for Rear Axle, PA6 Ertalon, blackInstallation instructionsMounting materialDetailsTotal weight: approx. 6.2 kg

Adventure Set ProtectionThe Adventure Set Protection includes all the essential protective components for the Yamaha MT-09 Tracer.Ready for any adventure: the protective parts of this Adventure Set provide you and your bike with an extra layer of protection in case of a fall and during off-road rides. The model-specific protectors impress with their optimal fit. They can be easily mounted at the original attachment points and blend seamlessly into the motorcycle's appearance. Treat yourself and your machine to that extra protection!Crash BarsConstruction from robust steel with a 27 mm tube diameterWeather and corrosion-resistant powder coating in blackReliable protection of important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame attachment pointsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 3.2 kgEngine Cover ProtectionReliable protection of the left engine coverTwo-part, the upper part serves as a sliding padNo impact on riding behaviorCNC machined for precise fit and appealing appearanceEasy installation at original attachment points on the coverMade from high-strength aluminum alloy with weather-resistant anodizingDetailsMaterial: Aluminum / AluminumSurface: Anodized / AnodizedColor: Silver / BlackTotal weight: Approx. 0.3 kgNot compatible withDoes not fit in conjunction with generator cover protectionEngine ProtectionGood ventilation through surrounding air intakesCan be installed without drilling and weldingDurable and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting material includedRobust design made from high-quality aluminum alloyDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: BrushedColor: SilverTotal weight: Approx. 1.1 kgNot compatible withFront spoiler MSS.06.471.10000/B. Akrapovic exhaust system.Crash Pad Kit for Rear AxleProtection of the swingarmDiscreet sliding pad made from abrasion-resistant polyamideRobust core made from glass-fiber reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: BlackTotal weight: Approx. 0.3 kgCrash Pad Kit for Front AxleProtection of the forkDiscreet sliding pad made from abrasion-resistant polyamideRobust core made from glass-fiber reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: BlackTotal weight: Approx. 0.3 kgDelivery Contents2 x Crash Bars, Steel, Black1 x Engine Cover Protection, Aluminum, Silver1 x Engine Protection, Aluminum, Silver1 x Crash Pad Kit for Rear Axle, PA6 Ertalon, Black1 x Crash Pad Kit for Front Axle, PA6 Ertalon, BlackInstallation instructionsMounting materialDetailsTotal weight: Approx. 6.1 kg

Adventure Set ProtectionReady for any adventure: the protective parts of this Adventure Set provide you and your bike with an extra layer of protection in case of a fall and during off-road rides. The model-specific protectors impress with their optimal fit. They can be easily mounted at the original attachment points and blend seamlessly into the motorcycle's appearance. Treat yourself and your machine to that extra protection!Crash BarsConstruction from robust steelWeather and corrosion-resistant powder coating in blackReliable protection for important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame attachment pointsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.6 kgEngine GuardUnderbody protection against stone impacts and collisionsOffers more protection through secure and stable attachment pointsDurable and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting materials includedRobust design made from high-quality aluminum alloyDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 3.4 kgHand Protector Mounting KitModel-specific mounting kit with aluminum brackets for particularly durable two-point mountingCompatible with KOBRA or BBSTORM hand protector shellsProtection for levers and handsEasy mounting of the hand shells to the aluminum bracketsDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.0 kgNoteThe delivery includes only the aluminum brackets for the right and left sides. The KOBRA or BBSTORM hand protector shells are available separately.KOBRA Hand Protector ShellsHand shells made from impact-resistant Moplen plasticSimple bolting of the hand protectors to KOBRA mounting kitsModern design, blends seamlessly into the motorcycle's appearanceProtection for levers and hands in off-road conditions and against weather influencesDetailsMaterial: MoplenColor: BlackTotal weight: Approx. 0.2 kgNoteThe delivery includes only two KOBRA hand shells. A separately available KOBRA hand protector mounting kit is required for attachment.Crash Pad Kit for Front AxleProtection for the forkDiscreet sliding pad made from abrasion-resistant polyamideRobust core made from fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: BlackTotal weight: Approx. 0.4 kgCrash Pad Kit for Rear AxleProtection for the swingarmDiscreet sliding pad made from abrasion-resistant polyamideRobust core made from fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersDetailsMaterial: PA6 ErtalonColor: BlackTotal weight: Approx. 0.4 kgDelivery Contents2 x Crash Bars, Steel, Black1 x Engine Guard, Aluminum, Black2 x Hand Protector Kit, Moplen, Black1 x Crash Pad Kit for Front Axle, PA6 Ertalon, Black1 x Crash Pad Kit for Rear Axle, PA6 Ertalon, BlackMounting instructionsMounting materialsDetailsTotal weight: Approx. 10.9 kg

Barkbusters STORM Handguard KitsSTORM handguards are suitable for street machines, adventure bikes, naked bikes, and scooters. The one-point mounting system allows for a high level of protection with easy installation. The handguard kit includes the plastic shells, the appropriate aluminum frames, and the mounting materials. The STORM handguards offer a particularly large protective area, providing good protection against weather conditions.Fits 22 mm handlebarsOne-point attachmentEspecially large protective areaProtection against weather conditionsFor hollow handlebarsScope of Delivery1 x Barkbusters STORM Handguard KitsInstallation instructionsMounting materialsDetailsColor: blackTotal weight: approx. 0.6 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Fluid Reservoir ProtectorThe compact brake fluid reservoir protector shields the original brake fluid reservoir from stone chips and simultaneously prevents the unwanted removal of the cap. The protector can be easily attached to the motorcycle with just a few hand movements.High-quality appearance and workmanshipProtection of the original brake fluid reservoir from stone chipsPrevents the unwanted removal of the capScope of Delivery1 x Brake Fluid Reservoir ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: blackOverall weight: approx. 0.1 kg

Brake Pump ProtectorSW-MOTECH manufactures this brake pump protector specifically for the Harley-Davidson Pan America.The protector, made from bent and laser-cut aluminum, protects the foot brake cylinder - even from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: Powder-coatedColor: BlackTotal weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - even from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: brushedColor: silverTotal weight: approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder of the Yamaha Ténéré 700 - also from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmColor: silverTotal weight: approx. 0.1 kg

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - also from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: powder-coatedColor: blackTotal weight: approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - even from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Brake Pump ProtectorThe aluminum-bent and laser-cut protector protects the foot brake cylinder - also from unwanted boot contact.Prevents contact between boot and brake pumpProvides additional protection during off-road ridingScope of Delivery1 x Brake Pump ProtectorInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: brushedColor: silverTotal weight: approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it also does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Belly PanThe belly pan from SW-MOTECH, designed to match the aesthetics of the bike, offers reliable protection against stone chips and unintended ground contact. The powder-coated surface is extremely durable and provides long-lasting protection against corrosion. The highly stable underbody protection can be easily mounted without drilling or welding at the original mounting points using the included custom-fit mounting elements made of steel.Designed to match the aesthetics of the Honda CB1000RUnderbody protection against stone chips and collisionsRobust and easy installation at original mounting pointsCan be mounted without drilling and weldingPowder-coated surfaceDelivery Contents1 x Belly PanInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.4 kg

Engine ProtectionThis engine protection is specifically designed by SW-MOTECH for the Kawasaki Versys 650.Additional protection for the engine against stone impacts and ground contact: The engine protection, made from high-quality aluminum alloy, shows its full potential off-road, but also provides street motorcycles with enhanced safety and a unique look. State-of-the-art manufacturing processes give the model-specific protective parts a secure fit. The attachment to frame mounting points provides additional stability and allows for easy installation.Underbody protection against stone impacts and collisionsRobust and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting materials includedSturdy design made from high-quality aluminum alloyScope of Delivery1 x Engine ProtectionInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 3.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Engine ProtectionThis engine protection has been specifically designed for the Triumph Trident 660.Additional protection for the engine against stone impacts and ground contact: The engine protection made from high-quality aluminum alloy shows its full potential off-road, but also provides street motorcycles with added safety and a unique look. State-of-the-art manufacturing processes give the model-specific protective parts a secure fit. The attachment to frame mounting points provides additional stability and allows for easy installation.Underbody protection made of 4 mm and black side walls made of 2.5 mm thick aluminumUnderbody protection against stone impacts and collisionsRobust and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting materials includedSturdy design made from high-quality aluminum alloyScope of Delivery1 x Engine ProtectionInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Belly PanThe belly pan from SW-MOTECH, designed to match the bike's aesthetics, offers reliable protection against stone chips and unintended ground contact. The powder-coated surface is extremely durable and provides long-lasting protection against corrosion. The highly stable underbody protection can be easily attached to the original mounting points using the included custom-fit steel mounting elements, without the need for drilling or welding.Underbody protection against stone chips and collisionsRobust and easy installation at original mounting pointsInstalled without drilling or weldingPowder-coated surfaceScope of Delivery1 x Belly PanInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 2.1 kg

Belly PanThe belly pan from SW-MOTECH, designed to match the bike's aesthetics, offers reliable protection against stone chips and unintended ground contact. The powder-coated surface is extremely durable and provides long-lasting protection against corrosion. The highly stable underbody protection can be easily attached to the original mounting points using the included custom-fit steel mounting elements, without the need for drilling or welding.Underbody protection against stone chips and collisionsRobust and easy installation at original mounting pointsInstalled without drilling or weldingPowder-coated surfaceScope of Delivery1 x Belly PanInstallation instructionsMounting materialsDetailsMaterial: Aluminum / AluminumSurface: powder-coated / powder-coatedColor: black / silverTotal weight: approx. 1.4 kg

Front SpoilerThis front spoiler has been specifically designed for the Suzuki GSX-8S.The front spoiler from SW-MOTECH, tailored to the bike's design, offers reliable protection against stone chips and unintended ground contact. The powder-coated surface is extremely durable and provides long-lasting protection against corrosion. The highly stable underbody protection can be easily mounted without drilling or welding at the original mounting points using the included custom-fit mounting elements made of steel.Made from 3 mm thick aluminum sheetDesigned to match the Suzuki GSX-8SUnderbody protection against stone chips and collisionsRobust and easy installation at original mounting pointsCan be installed without drilling and weldingPowder-coated surfaceDelivery Contents1 x Front SpoilerInstallation instructionsMounting materialsDetailsMaterial: Aluminum / AluminumSurface: powder-coated / powder-coatedColor: black / silverTotal weight: approx. 2.0 kg

Engine ProtectionThis engine protection has been specifically developed for the Honda CB750 Hornet.Additional protection for the engine against stone impacts and ground contact: The engine protection, made from high-quality aluminum alloy, shows its full capabilities off-road, but also provides street motorcycles with added safety and a unique look. State-of-the-art manufacturing processes give the model-specific protective parts a secure fit. The attachment to frame mounting points provides additional stability and allows for easy installation.Underbody protection against stone impacts and collisionsRobust and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting materials includedSturdy design made from high-quality aluminum alloyDelivery Scope1 x Engine ProtectionInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: brushed / powder-coatedColor: silverTotal weight: approx. 2.3 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.