1" Ball for M10 Mirror ThreadThe ball adapter with a diameter of 1" is used for mounting a clamp arm. The delivery includes a screw with thread M10 x 1.25 mm for mounting on the mirror thread.Delivery Contents1 x 1" Ball for M10 Mirror ThreadDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal Weight: Approx. 0.1 kgNoteFor StVZO approval, 2 mirrors must be mounted

1" Ball for M6 ThreadThe ball adapter with a 1" diameter is used for mounting a clamp arm. The delivery includes M6 screws of varying lengths.Delivery Contents1 x Ball Adapter M6Mounting MaterialDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal Weight: Approx. 0.1 kg

1" Ball for M8 ThreadThe ball adapter with a 1" diameter is used for mounting a clamp arm. The delivery includes M8 screws of varying lengths.Delivery Contents1 x Ball Adapter M8Mounting MaterialDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal Weight: Approx. 0.1 kg

1" Ball Kit for Mirror ThreadsThe 1" Ball Kit allows the attachment of navigation devices to mirror threads with M8 or M10 threads. A clamp arm can be mounted on the ball adapter, allowing for variable positioning of the navigation device.for mounting on the original mirror mount (between mirror and handlebar mount)Scope of Delivery1 x Ball Adapter1 x Mounting PlateInstallation InstructionsMounting MaterialDetailsColor: blackTotal Weight: approx. 0.1 kg

1" Ball with Mount for GoPro CameraBall adapter for attaching GoPro HD cameras to the swiveling clamp arm with a 1" diameter ball. The ball holder is also compatible with the Actionpro x7.Ball holder for mounting a GoPro HD camera on the clamp armFor GoPro HD HERO and GoPro SessionDelivery Contents1 x 1" Ball with Mount for GoPro CameraInstallation instructionsMounting materialsDetailsColor: blackTotal weight: approx. 0.1 kg

1" Ball with Mounting PlateIf you already have a clamp arm, you can easily and securely attach a GPS device or a splash-proof bag with this universal holder. The holder, consisting of a ball joint with a 1" diameter and a mounting plate, is made of fiberglass-reinforced plastic with very high strength.The hole pattern of the universal holder corresponds to the standard hole pattern of the device bases for TOMTOM Rider and Garmin zumo modelsScope of Delivery1 x 1" Ball with Mounting PlateInstallation InstructionsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal Weight: approx. 0.1 kg

Adapter Kit for Garmin Zumo ModelsAdapter set for mounting Garmin Zumo motorcycle navigation devices on the vibration-dampened QUICK-LOCK and Nonshock GPS holders from SW-MOTECH.For Garmin Zumo 340/345/350/390/395/396/590/595/660 on QUICK-LOCK GPS holders and on Nonshock GPS holders with handlebar clampScope of Delivery1 x Adapter Kit for Garmin Zumo ModelsInstallation instructionsMounting materialsDetailsColor: blackTotal weight: approx. 0.1 kg

Swivel Clamp ArmThe swivel and rotatable clamp arm is designed for mounting devices such as navigation systems, cameras, or smartphones. It is intended for ball adapters with a 1" diameter.Swivels in two axes up to 90° and 45° respectivelyVarious mounting optionsCompatible with TomTom Rider, Garmin Zumo, and Blaupunkt MotoPilotLength: 7.62 cmDelivery Contents1 x Swivel Clamp ArmDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal Weight: approx. 0.2 kg

Clamp Arm ExtensionWith this 3-inch clamp arm and the joint with two 1-inch balls, an existing system can be extended. This allows for better and more individual positioning of navigation devices, cameras, or smartphones.For extending an already existing systemFurther improved positioningSwivels in two axes up to 90° or 45°Scope of Delivery1 x 3-inch clamp arm1 x joint with two 1-inch ballsInstallation instructionsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 0.2 kgNoteCompatible with Navi Case Pro and Smartphone Hardcase (adapter required)

Navigation Mount with Handlebar ClampWith this navigation mount featuring a handlebar clamp, motorcycle navigation devices can be securely attached to tubular handlebars with a diameter of 22 mm. The surface of the high-quality aluminum clamp is black anodized to match the appearance of the motorcycle.Special rubber dampers between the handlebar clamp and the device holder provide protection against vibrations and shocks. The swiveling mount offers secure support for many current navigation devices, as well as for Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern.Easy installation on handlebars with a diameter of 22 mmSwiveling and vibration-dampenedMounting plate with a universal hole pattern provides secure support for common navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHMade from high-strength aluminum alloy, CNC machinedDelivery Contents1 x Navigation Mount with Handlebar ClampInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: AnodizedColor: BlackTotal Weight: Approx. 0.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navigation Mount with Handlebar ClampWith this navigation mount featuring a handlebar clamp, motorcycle navigation devices can be securely attached to tubular handlebars with a diameter of 25.4 mm. The surface of the high-quality aluminum clamp is anodized in black to match the appearance of the motorcycle.Special rubber dampers between the handlebar clamp and the device holder provide protection against vibrations and shocks. The swiveling mount offers secure support for many current navigation devices, as well as for Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern.Easy installation on handlebars with a diameter of 25.4 mmSwiveling and vibration-dampenedMounting plate with a universal hole pattern provides secure support for common navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHMade from high-strength aluminum alloy, CNC machinedScope of Delivery1 x Navigation Mount with Handlebar ClampInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: Anodized / polishedColor: SilverTotal weight: Approx. 0.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navi CaseThe Navi Case impresses with practical features for landscape-oriented navigation devices: The cover membrane with sunshade allows for easy operation of touch surfaces. Velcro straps in the padded and splash-proof device bag provide support for the hardware, and the surrounding zipper allows for easy opening. A rubber coating prevents moisture from entering.With the T-Lock mount on the back, you can quickly and easily secure the bag to the appropriate holders. With a quarter turn clockwise, the Navi Case is attached to the holder.Compatible with the following models:Blaupunkt Motopilot 43 EU LMUBMW NavigatorV, VIGarmin Zumo340-LM, 345, 346 LMT-S, 350 LM, 390 LM, 395 LM, 396 LMT-S, 590, 595 LM, 660, DriveSmart 55 MT-D, DriveAssist 51 EU LMT-DTomTom Rider:50, 400, 420, 410, 450, 500, 550, Urban Rider, Start 52, Start 62, GO Premium, GO Premium, GO Essential TMC, GO Essential TMC, GO 520, GO 620, GO 5200, GO 6200For landscape-oriented devicesMade from shape-stable EVA materialWith T-Lock mount on the backTouch operation windowRobust case with reinforced base plateRemovable inner paddingFoam rubber inserts and Velcro straps for positioning the navigation deviceCable passageSurrounding, water-repellent zipper, can be stored securelyScope of delivery1 x Navi CaseInstallation instructionsMounting materialsDetailsMaterial: EVAColor: blackTotal weight: approx. 0.2 kgNoteWhether all functions of the touch control panel can be used depends on the device model (e.g., fingerprint sensor)

Navi Holder for Pipe Ø 17 mmThe central brace, windscreen mount, or other pipes in the cockpit can provide ideal mounting options for the navigation device depending on the vehicle. For these models, the removable Navi holder with clamp for pipes is available.For mounting on the handlebar central brace or other pipes with Ø 17 mmRemovable, vibration-dampened GPS device holderSwivels for ideal visibility of the devicesMounting plate with universal hole pattern provides secure hold for common navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Navi Holder for Pipe Ø 17 mmInstallation instructionsMounting materialsDetailsMaterial: Aluminum / SteelSurface: Anodized / Powder-coatedColor: Black / BlackTotal weight: Approx. 0.4 kgNoteThe hole pattern on the included mounting plate corresponds to that of the device bases of all TOMTOM Rider, Garmin Montana, Blaupunkt MotoPilot, as well as all RAM applications and our GPS bags.For the Garmin Zumo 340/345/350/390/395/590/595/660, the adapter kit for Garmin Zumo models GPS.00.085.10000/B is required.Approval NoteThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navigation Mount for ThreadThe 1" ball of the navigation mount is attached to the motorcycle using a screw by simply replacing an original screw. The adjustable clamp arm allows for optimal positioning of the navigation device. Thanks to the universal hole pattern of the mounting plate, the navigation mount provides secure support for many current navigation devices as well as for Navi Case Pro device bags and smartphone hard cases from SW-MOTECH.For M8 threadsEasy installation on existing threads in the cockpitOptimal positioning through rotatable and adjustable clamp armMounting plate with universal hole pattern provides secure support for common navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Ball Adapter M81 x Ball Joint with Mounting Plate1 x Clamp ArmInstallation InstructionsMounting MaterialDetailsColor: blackTotal Weight: approx. 0.4 kg

Navi Holder for Tube Ø 10/12 mmThe central brace, windscreen mount, or other tubes in the cockpit can provide ideal mounting options for the navigation device depending on the vehicle. For these models, the removable Navi holder with clamp for tubes is available.For mounting on the handlebar central brace or other tubes with Ø 10/12 mmRemovable, vibration-dampened GPS device holderSwivels for ideal visibility of the devicesMounting plate with universal hole pattern provides secure hold for common navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHDelivery Contents1 x Navi Holder for Tube Ø 10/12 mmInstallation instructionsMounting materialsDetailsMaterial: Aluminum / SteelSurface: Anodized / Powder-coatedColor: Black / BlackTotal Weight: Approx. 0.3 kgNoteThe hole pattern on the supplied mounting plate corresponds to that of the device bases of all TOMTOM Rider, Garmin Montana, Blaupunkt MotoPilot, as well as all RAM applications and our GPS bags.For the Garmin Zumo 340/345/350/390/395/590/595/660, the adapter kit for Garmin Zumo models GPS.00.085.10000/B is required.Approval NoteThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navi Holder for Tube Ø 13/16 mmThe central strut, windscreen mount, or other tubes in the cockpit can provide ideal mounting options for the navigation device depending on the vehicle. For these models, the removable Navi holder with clamp for tubes is available.For mounting on the handlebar central strut or other tubes with Ø 13/16 mmRemovable, vibration-dampened GPS device holderSwivels for ideal visibility of the devicesMounting plate with universal hole pattern provides secure hold for common navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHDelivery Scope1 x Navi Holder for Tube Ø 13/16 mmInstallation instructionsMounting materialsDetailsMaterial: Aluminum / SteelSurface: Anodized / Powder-coatedColor: Black / BlackTotal Weight: Approx. 0.4 kgNoteThe hole pattern on the supplied mounting plate corresponds to that of the device bases of all TOMTOM Rider, Garmin Montana, Blaupunkt MotoPilot, as well as all RAM applications and our GPS bags.For the Garmin Zumo 340/345/350/390/395/590/595/660, the adapter kit for Garmin Zumo models GPS.00.085.10000/B is required.Approval NoteThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navigation Mount for Steering Head Tube with T-LockMounting navigation devices can be tricky on a supersport bike. We have a solution! Our ball clamp can be attached using two clamping sleeves in steering head tubes with an inner diameter of 12.5 to 25.0 mm.The 1” ball is compatible with our clamp arm and device holders as well as RAM systems. This allows you to position your navigation device, GoPro, or camera individually on supersport bikes.In addition to the various mounting elements included, the T-Lock mount offers a quick attachment option for additional devices on the steering head tube. Once the T-Lock mount is installed, navigation devices or other equipment can be easily removed with a quarter turn and just as quickly reattached.T-Lock mount for quick attachment to the clamp armAttachment to the steering head tubeSuitable for supersport bikes1” ball compatible with clamp arm and device holdersDelivery Contents1 x Clamp Arm1 x Ball Adapter M81 x Ball Joint with Mounting Plate1 x T-Lock MountInstallation InstructionsMounting MaterialDetailsTotal Weight: approx. 0.3 kg

Navigation Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate secures the stable attachment of the navigation mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: these are combined in the vehicle-specific navigation mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavigation mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for standard navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Navigation Mount in the CockpitInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: Black / BlackTotal Weight: Approx. 0.7 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navigation Mount in the CockpitThe swiveling clamp arm allows for optimal positioning of the navigation device. Thanks to the universal hole pattern of the mounting plate, the navigation mount provides secure support for many current navigation devices as well as for Navi Case Pro device bags and smartphone hard cases from SW-MOTECH.The mount has been precisely designed for this motorcycle modelThe RAM clamp arm with two ball joints allows for individual positioning of devicesGPS devices or splash-proof bags can be mounted on the universal holderScope of Delivery1 x Mounting plate1 x Ball adapter M81 x Ball joint with mounting plate1 x RAM clamp armMounting instructionsMounting materialsDetailsMaterial: Aluminum / SteelSurface: Anodized / Powder-coatedColor: Black / BlackTotal weight: Approx. 0.6 kg

Navi Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate secures the stable attachment of the Navi mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: these are combined in the vehicle-specific Navi mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavi mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for common Navi models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Navi mount in the cockpitInstallation instructionsMounting materialsDetailsMaterial: Steel / fiberglass-reinforced plasticSurface: Powder-coatedColor: Black / BlackTotal weight: Approx. 0.6 kgNoteThe hole pattern on the supplied mounting plate corresponds to that of the device bases of all TOMTOM Rider and Garmin Zumo models, Garmin Montana, Blaupunkt MotoPilot, as well as all RAM applications and our GPS bagsApproval NoteThis product does not require approval. Therefore, it also does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navi Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate secures the stable attachment of the Navi mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: these are combined in the vehicle-specific Navi mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavi mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for standard navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHDelivery Contents1 x Navi mount in the cockpitInstallation instructionsMounting materialsDetailsMaterial: Steel / fiberglass-reinforced plasticSurface: Powder-coatedColor: Black / BlackTotal weight: Approx. 0.6 kgNoteThe hole pattern on the supplied mounting plate corresponds to that of the device bases of all TOMTOM Rider and Garmin Zumo models, Garmin Montana, Blaupunkt MotoPilot, as well as all RAM applications and our GPS bagsApproval NoteThis product does not require approval. Therefore, it also does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navigation Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate secures the stable attachment of the navigation mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: These are combined in the vehicle-specific navigation mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavigation mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for standard navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Navigation Mount in the CockpitInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: Black / BlackTotal weight: Approx. 0.6 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Navi Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate secures the stable attachment of the Navi mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: these are combined in the vehicle-specific Navi mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavi mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for common Navi models and Navi Case Pro device bags or hard cases from SW-MOTECHDelivery Contents1 x Navi mount in the cockpitInstallation instructionsMounting materialsDetailsMaterial: Steel / fiberglass-reinforced plasticSurface: Powder-coatedColor: Black / BlackTotal weight: Approx. 0.6 kgNoteThe hole pattern on the supplied mounting plate corresponds to that of the device bases of all TOMTOM Rider and Garmin Zumo models, Garmin Montana, Blaupunkt MotoPilot, as well as all RAM applications and our GPS bagsApproval NoteThis product does not require approval. Therefore, it also does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Navigation Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate ensures the stable attachment of the navigation mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: These are combined in the vehicle-specific navigation mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavigation mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for standard navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Navigation Mount in the CockpitInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: Black / BlackTotal Weight: Approx. 0.8 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.