SysBag WP LThe largest model of the SysBag WP trio is made entirely of TPU material and has a total volume of a proud 40 liters. The SysBag WP L is exclusively designed for off-road use: The strap buckles of the front pocket are intentionally placed on the top, so branches cannot get caught on narrow paths. The outer edges of the bag are covered with robust Hypalon material, providing additional protection in case of falls. The four compression straps on both sides allow the bag to be secured into a compact unit even with a lower load. On the front of the SysBag L WP, there is a spacious additional pocket that is easy to access and offers space for a rain suit or A4-sized maps. Two zippered pockets on the inside of the bag and the lid provide additional storage for smaller items.The SysBag WP models are your reliable companions for uncompromising motorcycle adventures. Thanks to careful material selection and elaborate processing, all three bags are completely waterproof and extremely robust.There is a suitable SysBag WP for every application and every motorcycle – the three models S, M, and L differ in luggage volume and method of attachment. All three bags feature a roll-top closure and an overlapping lid. The inner bag is removable, and two freely positionable dividers with Velcro make organizing your luggage easier. The SysBag WP models are available either individually, with an adapter plate, or in a set with the appropriate side carrier. Those opting for the simple quick-release solution on the carrier must first loop the bags onto an adapter plate using straps and double D-rings. These, in turn, are either attached to the SLC carrier (S, M) or the removable PRO side carrier (L). Alternatively, all three SysBag WP models can also be looped onto the rear, a luggage rack, or side carriers from other manufacturers using the included straps. Made of TPU materialAttachment to the PRO side carrier or by looping onto the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for fixing excess strap lengthsInner bag removableDelivery Contents1 x SysBag WP L4 x Loop straps4 x Anti-slip tubes1 x Paint protection filmMounting instructionsMounting materialsDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteCompatible adapter plate sold separately

SysBag WP L with Adapter Plate LeftThe largest model of the SysBag WP trio is made entirely of TPU material and has a total volume of a remarkable 40 liters. The SysBag WP L features a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make organizing your luggage easier. The SysBag WP L is exclusively designed for off-road use: The strap buckles of the front pocket are intentionally placed on the top, so branches cannot get caught on narrow paths. The outer edges of the bag are covered with robust Hypalon material, providing additional protection in case of falls. The four compression straps on both sides allow the bag to be secured into a compact unit even with a lower load. On the front of the SysBag L WP, there is a spacious additional pocket that is easy to access and offers space for a rain suit or A4-sized maps. Two zippered pockets on the inner sides of the bag and the lid provide additional storage for smaller items.For quick attachment of the bag to the left PRO or EVO side carrier, the included adapter plate must be mounted once on the SysBag WP L: In the first step, the four mounting elements for the side carrier are screwed onto the adapter plate. Then, you secure the SysBag WP L with loop straps to the adapter plate. After that, you can hang the bag on the left PRO or EVO side carrier with a single motion. The attachment of the SysBag WP M with adapter plate is also possible on the ADVENTURE or STREET RACK.Made of TPU materialAttachment to the left PRO or EVO side carrier or to SW-MOTECH luggage racks with the included adapter plate100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierEasy attachment of the adapter plate with straps on the back of the SysBag WP bagsDelivery Contents1 x SysBag WP L1 x Adapter plate left for SysBag WP L1 x Adapter kit for SysBag WP4 x Loop straps4 x Anti-slip tubes1 x Paint protection filmAssembly instructionsMounting materialsDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 4.3 kgTotal volume: 27.0-40.0 lNoteFor the SysBag WP L with left adapter plate, you can also find the SysBag WP L bag with right adapter plate for the PRO or EVO side carrier in the webshop.The adapter kit with the appropriate mounting brackets for the PRO or EVO side carriers is included in the delivery.

SysBag WP L with Right Adapter PlateThe largest model of the SysBag WP trio is made entirely of TPU material and has a total volume of a proud 40 liters. The SysBag WP L features a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make organizing your luggage easier. The SysBag WP L is exclusively designed for off-road use: The strap buckles of the front pocket are intentionally placed on the top, so branches cannot get caught on narrow paths. The outer edges of the bag are covered with robust Hypalon material, providing additional protection in case of falls. The four compression straps on both sides allow the bag to be secured into a compact unit even with a lower load. On the front of the SysBag L WP, there is a spacious additional pocket that is easy to access and offers space for a rain suit or A4-sized maps. Two zippered pockets on the inner sides of the bag and the lid provide additional storage for smaller items.For quick attachment of the bag to the right PRO or EVO side carrier, the included adapter plate must be mounted once on the SysBag WP L: In the first step, the four mounting elements for the side carrier are screwed onto the adapter plate. Then, you secure the SysBag WP L with loop straps to the adapter plate. After that, you can hang the bag on the right PRO or EVO side carrier with a single motion. The attachment of the SysBag WP M with adapter plate is also possible on the ADVENTURE or STREET RACK.Made of TPU materialAttachment to the right PRO or EVO side carrier or SW-MOTECH luggage racks with the included adapter plate100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierEasy attachment of the adapter plate with straps on the back of the SysBag WP bagsDelivery Contents1 x SysBag WP L1 x Right Adapter Plate for SysBag WP L1 x Adapter Kit for SysBag WP4 x Loop Straps4 x Anti-Slip Tubes1 x Paint Protection FilmAssembly InstructionsMounting MaterialDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal Weight: approx. 4.3 kgTotal Volume: 27.0-40.0 lNoteFor the SysBag WP L with right adapter plate, you can also find the SysBag WP L bag with left adapter plate for the PRO or EVO side carrier in the webshop.The adapter kit with the appropriate mounting brackets for the PRO or EVO side carriers is included in the delivery.

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Aprilia Tuareg for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.8 kgWidth mounted on motorcycle: 52.5 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 14.6 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Benelli TRK 502 X for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 4.6 kgWidth mounted on motorcycle: 58.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityTie-down loops for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: approx. 13.8 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW F 650 GS and BMW G 650 GS for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from the brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval round tubing close to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.2 kgWidth mounted on motorcycle: 52.0 cmNoteFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be mounted, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyDelivery Contents2 x EVO Side Carriers2 x Adapter Kit for SysBag WP1 x Adapter Plate Left for SysBag WP L1 x Adapter Plate Right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 13.0 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW F650, BMW F700, and BMW F850 for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 6.5 kgWidth mounted on motorcycle: 57.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery1 x PRO side carrier2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialDetailsTotal weight: Approx. 15.7 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW F 750 GS and BMW F 850 GS for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 5.3 kgWidth mounted on motorcycle: 53.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: approx. 14.3 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW F 900 XR for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.7 kgWidth mounted on motorcycle: 50.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 13.8 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW R 1200 GS for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval round tube close to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.8 kgWidth mounted on motorcycle: 51.0 cmNoteFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be mounted, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x EVO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LInstallation instructionsMounting materialsDetailsTotal weight: Approx. 14.1 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW R 1200 GS and BMW R 1250 GS for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.9 kgWidth mounted on motorcycle: 51.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kits for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 14.1 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW R 1200 and R 1250 for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval round tubing close to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 3.7 kgWidth mounted on motorcycle: 49.0 cmNoteFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be mounted, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyDelivery Contents2 x EVO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 12.6 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and two SysBag WP L bags, SW-MOTECH prepares the BMW R 1100 GS and the BMW R 1150 GS for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval tubing closely to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.6 kgWidth mounted on motorcycle: 50.0 cmNoteFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be mounted, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x EVO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LInstallation instructionsMounting materialsDetailsTotal weight: Approx. 13.9 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Ducati Multistrada 1200 for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner bag is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval tubing close to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 3.8 kgWidth mounted on motorcycle: 50.0 cmNoteFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be attached, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner bag removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x EVO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LInstallation instructionsMounting materialsDetailsTotal weight: Approx. 13.0 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Ducati Multistrada 1200 / 1260 / 950 for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 5.5 kgWidth mounted on motorcycle: 47.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityTie-down loops for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: approx. 14.8 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda CB 500 for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 5.8 kgWidth mounted on motorcycle: 44.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialDetailsTotal weight: approx. 15.0 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and the SysBag WP L bags, SW-MOTECH prepares the Honda CBR1100XX for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from the brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval round tube close to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 4.2 kgWidth mounted on motorcycle: 50.0 cmNoteFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be mounted, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHSuitable for PRO side carriers and EVO side carriersAlso for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x EVO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: approx. 13.4 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda CRF1000L Africa Twin for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.8 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyDelivery Contents2 x PRO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 14.2 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda CRF1000L Africa Twin for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.3 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 14.1 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda CRF1100L Africa Twin for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for every adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersInstallation not possible with original Honda luggage bridgeExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent installation, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: PVC-coatedColor: blackTotal weight: approx. 5.6 kgWidth mounted on motorcycle: 52.0 cmNoteFits in conjunction with Akrapovic slip-on exhaust system.For mounting side cases on the PRO side carrier, specific adapter kits are required. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Not compatible withInstallation not possible with original Honda luggage bridge.Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHFits PRO side carriers and EVO side carriersAlso for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNotePRO carrier side requires an adapter kitAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyDelivery Contents2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: approx. 15.0 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda CRF1100L Africa Twin Adventure Sport for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner bag is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: powder-coatedColor: blackTotal weight: approx. 5.2 kgWidth mounted on motorcycle: 52.0 cmNoteAlso fits in conjunction with Akrapovic slip-on exhaust system.For mounting side cases on the PRO side carrier, specific adapter kits are required. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: approx. 0.1 kgNotePRO carrier side requires an adapter kitAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner bag removableDetailsMaterial: TPUColor: blackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x adapter kit for SysBag WP1 x adapter plate left for SysBag WP L1 x adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: approx. 14.5 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda NC 750 for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make packing easier.PRO Side CarriersExtremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.7 kgNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Adapter Kit for SysBag WPAdapter kit is required for attaching the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 13.9 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of EVO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda VFR 800 X Crossrunner for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner bag is removable, and two freely positionable dividers with Velcro make packing easier.EVO Side CarriersRemovable luggage carrier for use with almost all common luggage systemsSeconds-fast assembly and disassembly with quick-release fasteners at inconspicuous attachment pointsCan be used with separately available SW-MOTECH luggage adapter for luggage from the brands TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadConstructed from oval tubing close to the vehicleHigh functionality and stabilityDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.0 kgWidth mounted on motorcycle: 50.0 cmNotePossibly install theft protection on the cross connectorFor theft protection, we recommend QLS.00.046.10100/BPlease note that depending on the luggage to be mounted, an adapter kit is required! (Listed under accessories)Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso suitable for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteFor the PRO carrier side, an adapter kit is requiredAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade from TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for attaching additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner bag removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x EVO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LInstallation instructionsMounting materialsDetailsTotal weight: Approx. 13.3 kgTotal volume: 80.0 l

SysBag WP L/L Bag SystemWith this combination of PRO side carriers and two SysBag WP L bags, SW-MOTECH prepares the Honda X-ADV for the next motorcycle adventure. The sturdy and removable carriers provide optimal support for the waterproof off-road bags in any terrain.The SysBag WP bags are your reliable companions for any adventure; there is a suitable model for every application and every motorcycle. Thanks to careful material selection and elaborate processing, all three sizes S, M, and L are completely waterproof and extremely robust. They feature a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro make organizing your luggage easier.PRO Side CarriersExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft protection availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional drillings, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.4 kgWidth mounted on motorcycle: 56.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Required for installationInstallation only possible in conjunction with STREET-RACK luggage carrier GPT.01.889.16000/B.Adapter Kit for SysBag WPAdapter kit is required to attach the SysBag WP L with adapter plate to PRO and EVO side carriers from SW-MOTECHCompatible with PRO side carriers and EVO side carriersAlso for ADVENTURE-RACK and STREET-RACK luggage carriersDetailsTotal weight: Approx. 0.1 kgNoteAn adapter kit is required for the PRO carrier sideAdapter Plate Left for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideAdapter Plate Right for SysBag WP LFor attachment to the EVO / PRO side carrierModel-specific EVO / PRO side carriers are available separatelyEasy fixation of the adapter plate with straps on the back of the SysBag WP bagsQuick-release system of the adapter plate ensures secure hold of the SysBag WP on the side carrierBefore first use, the included quick-release system is screwed onto the adapter plate.Adapter plate is available for either the left or right sideDetailsMaterial: AluminumSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.2 kgNoteFor each SysBag WP bag (S, M, L), there is a corresponding adapter plate for the left and right sideSysBag WP LMade of TPU materialAttachment to the PRO side carrier or by looping on the rear or on third-party carriers100% waterproof in the main compartmentRoll-top made of 210 ripstop TPUMOLLE attachment for securing additional bagsReinforced carrying handlesReflective details for better visibilityAttachment points for securing cable locksVelcro straps for securing excess strap lengthsInner pocket removableDetailsMaterial: TPUColor: BlackDimensions: 48.0 x 22.0 x 41.0 cmTotal weight: Approx. 2.9 kgTotal volume: 27.0-40.0 lNoteMatching adapter plate available separatelyScope of Delivery2 x PRO side carriers2 x Adapter kit for SysBag WP1 x Adapter plate left for SysBag WP L1 x Adapter plate right for SysBag WP L2 x SysBag WP LMounting instructionsMounting materialsDetailsTotal weight: Approx. 13.6 kgTotal volume: 80.0 l