PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Aprilia Tuareg, designing it as closely as possible to the vehicle.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed closely to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.8 kgWidth mounted on motorcycle: 52.5 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically designed this PRO Side Carrier to fit the rear of the Benelli TRK 502 X as closely as possible to the vehicle.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely durable.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes in the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed closely to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation on original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.6 kgWidth mounted on motorcycle: 58.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily opened with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarrierMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 6.5 kgWidth mounted on motorcycle: 57.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierSW-MOTECH has specifically designed this PRO Side Carrier for the rear of the BMW F 900 R / XR, constructing it as close to the vehicle as possible. The mounting width without cases is 500 mm.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, constructed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy mounting on original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Scope2 x PRO Side CarriersMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.7 kgWidth mounted on motorcycle: 50.0 cmNoteSpecific adapter kits are necessary for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.3 kgWidth mounted on motorcycle: 53.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Scope2 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.9 kgWidth mounted on motorcycle: 51.0 cmNoteSpecific adapter kits are necessary for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Ducati DesertX, constructing it as closely as possible to the vehicle.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely durable.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes in the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, constructed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents1 x PRO Side CarrierMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.6 kgWidth mounted on motorcycle: 50.5 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily opened with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Scope2 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.5 kgWidth mounted on motorcycle: 47.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market; the PRO side carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO side carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO side carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO side carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO side carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO side carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.3 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are necessary for mounting side cases on the PRO side carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market; the PRO side carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO side carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO side carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO side carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO side carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO side carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.8 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market; the PRO side carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO side carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO side carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO side carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO side carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO side carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.2 kgWidth mounted on motorcycle: 52.0 cmNoteAlso fits in conjunction with Akrapovic slip-on exhaust system.Specific adapter kits are required for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Honda Africa Twin, constructing it as closely as possible to the vehicle. The mounting width without cases is 520 mm.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely durable.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Mounting not possible with original Honda luggage bridgeExtremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, constructed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy mounting on original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: PVC-coatedColor: blackTotal weight: approx. 5.6 kgWidth mounted on motorcycle: 52.0 cmNoteFits in conjunction with Akrapovic slip-on exhaust system.Specific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Not compatible withMounting not possible with original Honda luggage bridge.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically designed this PRO Side Carrier to fit the rear of the Honda NC 750 X as closely as possible to the vehicle.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely durable.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes in the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily disengaged with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who wish to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed closely to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.7 kgNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily disengaged with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.4 kgWidth mounted on motorcycle: 56.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Required for InstallationInstallation is only possible in conjunction with STREET-RACK luggage carrier GPT.01.889.16000/B.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.2 kgWidth mounted on motorcycle: 54.0 cmNoteOnly in conjunction with STREET-RACK luggage carrierSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Husqvarna Norden 901, constructing it as closely as possible to the vehicle. The mounting width without cases is 590 mm.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, constructed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents1 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 6.2 kgWidth mounted on motorcycle: 59.0 cmNoteSpecific adapter kits are necessary for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Kawasaki KLR 650 (21-) and designed it as close to the vehicle as possible.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.8 kgWidth mounted on motorcycle: 51.5 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market; the PRO side carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO side carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO side carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO side carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO side carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO side carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Scope2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 6.0 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are necessary for mounting side cases on the PRO side carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily opened with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Scope1 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.9 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.9 kgWidth mounted on motorcycle: 45.0 cmNoteSpecific adapter kits are necessary for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Suzuki V-Strom 1050 DE, constructing it as closely as possible to the vehicle.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, constructed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableScope of Delivery2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.6 kgWidth mounted on motorcycle: 55.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically tailored this PRO Side Carrier to the rear of the Suzuki V-Strom 800DE, constructing it as closely as possible to the vehicle.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely durable.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, constructed close to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation on original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.5 kgWidth mounted on motorcycle: 59.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases from the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierWe have specifically designed this PRO Side Carrier to fit the rear of the Triumph Tiger 1200 models as closely as possible to the vehicle. The mounting width without cases is 500 mm.Even more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a standard in the accessory market; the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely durable.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the matching adapter kits are available separately. The numerous functional holes in the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick-release fasteners, which have also been revised as part of the new development. The quick-release fasteners can be released as usual with a quarter turn using a flat screwdriver or our multitool. The carrier can be completely removed in no time, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick-release fasteners is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely durable due to optimized shape and 2.5 mm thick steelPerfect fit, designed closely to the vehicleCompletely removable with newly developed, even more robust quick-release fastenersOptional anti-theft device availableFor permanent mounting, quick-release fasteners can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarriersMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 5.1 kgNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

PRO Side CarrierEven more robust, even more adventurous - still removable: with the introduction of the first removable carrier for motorcycle cases, we have set a benchmark in the accessory market, the PRO Side Carrier is the new generation. Off-road fans will be thrilled. The model-specific PRO Side Carrier made of 2.5 mm thick steel is extremely load-bearing.The PRO Side Carrier provides secure support for side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser, and Shad, as well as SysBag bags (SysBag 15, 30, and WP L) - the appropriate adapter kits are available separately. The numerous functional holes of the PRO Side Carrier allow for the attachment of RotopaX canisters and other accessories. We continue to rely on the popular QUICK-LOCK quick releases, which have also been revised as part of the new development. The quick releases can be easily detached with a quarter turn using a flat screwdriver or our multitool. In no time, the carrier can be completely removed, leaving only inconspicuous mounting elements on the bike. For those who want to permanently attach the PRO Side Carrier to their motorcycle, the new design of the quick releases is advantageous. No special mounting kit is required anymore; instead, the PRO Side Carrier can now be securely bolted with more affordable standard parts (M8). A corresponding screw kit (M8) is available separately from us.Extremely load-bearing due to optimized shape and 2.5 mm thick steelPerfect fit, designed close to the vehicleCompletely removable with newly developed, even more robust quick releasesOptional anti-theft device availableFor permanent mounting, quick releases can be replaced with standard parts (M8)Numerous functional holes, including compatibility with RotopaX systemEasy installation at original mounting pointsEffective corrosion protection through powder coatingSecure hold for TRAX, AERO, and SysBag bags (SysBag 15, 30, and WP L) with adapter plateAdapter kits for mounting cases from Givi/Kappa, Krauser, and Shad are also availableDelivery Contents2 x PRO Side CarrierMounting instructionsMounting materialDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 4.8 kgWidth mounted on motorcycle: 54.0 cmNoteSpecific adapter kits are required for mounting side cases on the PRO Side Carrier. These are available separately for the SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series, as well as SysBag with adapter plate (SysBag 15, 30, and WP L). Adapter kits for case systems from other manufacturers are also available separately.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.