Adapter Kit for ADVENTURE-RACK Luggage CarrierThis adapter kit includes all necessary components to attach DUSC hard-shell cases to the luggage carrier.Adapter kit for mounting DUSC side cases on the Adventure-Rack luggage carrier from SW-MOTECHScope of Delivery1 x Adapter Kit for ADVENTURE-RACK Luggage CarrierInstallation instructionsMounting materialsDetailsTotal weight: approx. 0.1 kg

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures a model-specific ADVENTURE-RACK for the Honda Africa Twin CRF1100L, which is mounted at the original attachment points. Behind the seat, a URBAN ABS or TRAX ADV top case can be attached to the sturdy ADVENTURE-RACK, and the luggage rack also provides ample support surface and tie-down points for large waterproof rear bags like the Drybag 350 or Drybag 700.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original attachment points. Specifically developed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down loops provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down loops, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original attachment points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 3.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Benelli TRK 502 X.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.5 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. Over 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for adventure touring bikes, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade from lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.5 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for adventure touring bikes, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade from lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.5 kgRequired for InstallationFor the Adventure models of the BMW R 1200 GS and R 1250 GS, the lowering kit for the ADVENTURE-RACK luggage rack GPT.07.782.19100/B is required for installation without the original luggage rack.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the BMW R 1200 and 1250 GS Adventure. The ADVENTURE-RACK is mounted on the original long BMW stainless steel luggage bridge, allowing the passenger grab handles to be used as well.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large touring, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.8 kgNoteThe original luggage rack from BMW does not need to be removed.The passenger grab handles remain on the motorcycle.For original BMW stainless steel luggage rack longApproval NoteThis product does not require approval. Therefore, it also does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the BMW 1250 GS Adventure. The ADVENTURE-RACK is mounted on the original short BMW stainless steel luggage bridge, allowing the passenger grab handles to be used as well.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically developed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.For models with rally seat.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under vibration, impacts, and high weight in harsh lab and field conditionsMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.8 kgNoteThe original luggage rack from BMW does not need to be removed.The passenger grab handles remain on the motorcycle.For original BMW stainless steel luggage rack shortFor models with rally seat.Approval NoteThis product does not need to be approved. Therefore, it does not require any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the BMW S 1000 XR.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.5 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. Over 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for adventure touring bikes, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade from lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackDimensions: 30.3 x 32.9 cmTotal weight: approx. 1.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. Over 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large touring, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 2.0 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackThe Honda Africa Twin CRF1100L Adventure Sports comes with a standard luggage bridge. Therefore, SW-MOTECH builds a model-specific ADVENTURE-RACK for the CRF1100L Adventure Sports. Behind the seat, a URBAN ABS or a TRAX ADV top case can be attached to the sturdy ADVENTURE-RACK, and the luggage rack also provides ample support surface and tie-down points for large waterproof tail bags like the Drybag 350 or the Drybag 700.Ready for big adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically developed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down loops provide secure hold for tail bags. The functional holes accommodate adapter kits for attaching top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for attaching top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down loops, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.4 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage CarrierSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage carrier suitable for the Honda NT 1100.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage carriers and feedback from customers and test riders have gone into the development of this aluminum luggage carrier. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage carrier has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage carrier for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage carrierMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 2.0 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Honda Transalp.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 2.0 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Kawasaki KLR 650 (21-).Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.8 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage CarrierSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage carrier suitable for the KTM 1290 Adventure.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage carriers and feedback from customers and test riders have gone into the development of this aluminum luggage carrier. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage carrier has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage carrier for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage carrierMounting instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 1.7 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage CarrierSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage carrier suitable for KTM models and Husqvarna Norden 901.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage carriers and feedback from customers and test riders have gone into the development of this aluminum luggage carrier. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage carrier has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage carrier for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage carrierMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.7 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. Over 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large touring, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade from lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Tiger 900 and Tiger 1200 models.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 1.9 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. Over 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for adventure touring bikes, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade from lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 3.0 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Yamaha Ténéré 700.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 4.0 kgNot compatible withThe ADVENTURE-RACK cannot be mounted together with the original luggage rack for the solo seat of YamahaApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage CarrierSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage carrier suitable for the Voge 300 Rally.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage carriers and feedback from customers and test riders have gone into the development of this aluminum luggage carrier. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage carrier has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage carrier for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra dose of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage carrierMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 1.6 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Voge 650 DS/X.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under vibration, impacts, and high weight in harsh lab and field conditionsMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm fasteners possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 2.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

Lowering Kit for ADVENTURE-RACK Luggage CarrierWith this lowering kit, the ADVENTURE-RACK can also be mounted without grab handles. This shifts the center of gravity of the luggage carrier down from the original position. It was developed by SW-MOTECH for the following models: BMW R 1200 GS (13-), R 1200 GS Adventure (13-), R 1200 GS Rallye (16-), R 1250 GS (18-), R 1250 GS Adventure.In combination with the aluminum passenger seat cover, a larger flat support surface is achieved.With this lowering kit, the ADVENTURE-RACK can also be mounted without grab handles.The center of gravity is shifted down from the original position.Please note that the use of the original BMW side cases is not possible.Scope of Delivery1 x Lowering Kit for ADVENTURE-RACK Luggage CarrierDetailsMaterial: SteelColor: BlackTotal Weight: Approx. 0.8 kgWarningPlease note that the use of the original BMW side cases is not possible.

PRO Tankring for ADVENTURE-RACK Luggage CarrierWhether on the road or off-road: with the PRO Tankring for the ADVENTURE-RACK, PRO tank bags can be quickly and securely attached to the rear as well. The PRO Tankring is fixed with four screws and allows for the simple clicking of PRO tank bags with a flat bottom.For attaching PRO tank bags to ADVENTURE-RACK luggage carriersQUICK-LOCK function enables easy clicking of the following tank bag models: PRO Micro, PRO Daypack, PRO Sport, and possibly PRO EngageEasy installation: PRO Tankring is screwed onto the ADVENTURE-RACK luggage carrierDelivery Contents1 x PRO Tankring for ADVENTURE-RACK luggage carrier1 x Mounting ringInstallation instructionsMounting materialsDetailsMaterial: glass fiber reinforced plastic / aluminumColor: blackTotal weight: approx. 0.2 kg