Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Honda NC 750 X.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Yamaha Ténéré 700.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: AnodizedColor: Black / SilverTotal weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

ION Footpeg KitOur affordable ION footpeg kits allow for the installation of the footpeg at the original height or a lowering by 15 mm. Extremely stable and designed for durability, the stainless steel footpegs provide extra grip and are recommended for adventure, off-road, and street machines. Joints made from high-strength aluminum alloy ensure that the peg can fold away in the event of the vehicle falling over. A removable rubber pad reduces vibrations, and the profile offers good grip even in off-road use. For the installation of the model-specific joint adapters on the footpeg mount, the original mounting components (spring, bolt, ...) are used.Easy installation on the original footpeg mountIndividually adjustable: original height or lowering of the footpeg by 15 mmMore riding comfort thanks to a large contact areaSlip-resistant due to profiled surface structureMade from high-quality, corrosion-resistant stainless steel casting with removable rubber padMounting materials includedLarge contact area (approx. 8 x 5 cm) for more comfort and gripScope of Delivery2 x ION footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialsDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.1 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspections outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.