Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Suzuki V-Strom 800DE.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a textured surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to the textured surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelMaterial Thickness: 12.80 cmColor: Black / SilverTotal Weight: Approx. 0.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Aprilia Tuareg 660.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Benelli TRK 502 X (18-).SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the BMW F 850 GS.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even while standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a textured surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to the textured surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersDelivery Contents1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the BMW F 900 XR.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a textured surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to the textured surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal adaptation to ergonomics, the height of the brake lever footrest can be adjusted in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and guarantees a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even while standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsIncrease of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the BMW R 1300 GS.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing positions. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even while standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersDelivery Contents1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: AnodizedColor: BlackApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the BMW R 1200 GS and R 1250 GS.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersDelivery Scope1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the BMW S 1000 RR.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing positions. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Ducati Multistrada.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Ducati Scrambler Desert Sled (16-18).SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: AnodizedColor: Black / SilverTotal weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Harley-Davidson Pan America Special.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Honda CB500X.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersDelivery Contents1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: AnodizedColor: Black / SilverTotal weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Honda Africa Twin CRF1100L.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Honda NC 750 X.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Kawasaki KLR 650.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersDelivery Contents1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: AnodizedColor: Black / SilverTotal weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Kawasaki Versys 1000.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelColor: Black / SilverTotal Weight: Approx. 0.2 kgApproval NoteThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Kawasaki Versys 650.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Stainless steelSurface: AnodizedColor: Black / SilverTotal weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake levers of KTM motorcycles.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing positions. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even while standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Royal Enfield Himalayan.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing positions. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a textured surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to the textured surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Suzuki DL 650 V-Strom.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and guarantees a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even while standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.5 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Suzuki V-Strom 1050.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footplate can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footplate and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a textured surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footplateIncreased and wider contact areaBetter grip thanks to the textured surface – even in wet and dirty conditionsHeight increase of the brake lever footplate by 22 or 27 millimetersDelivery Contents1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Triumph Tiger 1050 Sport (13-).SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersDelivery Contents1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Triumph Tiger 800 models.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled step on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even while standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.