ADVENTURE Foot Brake Lever ExtensionWith this additional part, you increase the contact area of the foot brake lever, thereby improving handling during off-road rides. The Adventure extension can be adjusted upwards by 5 millimeters, allowing you to reach the brake even in a standing riding position, making you safer while riding off-road.Expansion of the contact areaHigh-quality machined step for maximum stabilityHeight adjustable by 5 millimetersScope of Delivery1 x ADVENTURE Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: AnodizedColor: Black / SilverTotal weight: Approx. 0.1 kg

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.1 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination, to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We show how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.6 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting materials includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialsDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspections outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitSW-MOTECH has developed the EVO Footpeg Kit compatible with the Ducati Multistrada V4 & DesertX.The original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotatable elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotatable, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO Footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are easily mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedDelivery Scope2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet delivered with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering by up to 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.2 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspections outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for issuing a necessary foreign certification.

EVO Footpeg KitSW-MOTECH has developed the EVO Footpeg Kit suitable for the KTM 1290 Super Adventure.Does the original footpeg not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotatable elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are easily mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotatable, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedDelivery Scope2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We show how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet delivered with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitSW-MOTECH has developed the EVO Footpeg Kit compatible with the Ténéré 700 & Aprilia Tuareg 660.The original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitSW-MOTECH has developed the EVO Footpeg Kit compatible with the Harley-Davidson Pan America.The original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with non-slip surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.1 kgNot compatible withDoes not fit in conjunction with the original center stand.Approval NoteThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Footpeg KitSW-MOTECH has developed the EVO Footpeg Kit suitable for the Harley-Davidson Pan America.The original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are easily mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedDelivery Scope2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of necessary foreign certification.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We demonstrate how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.4 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

EVO Passenger Footpeg KitThe original passenger footpeg does not provide a comfortable position? Then the EVO Passenger Footpeg Kit for Triumph Tiger 1200 models is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are easily mounted with the original parts on the footpeg holder. We show how this works in the installation instructions.Easy installation on the original passenger footpeg holder36-way adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and supportMade of electropolished, corrosion-resistant stainless steel castingMounting materials includedDelivery Contents2 x EVO footpegs2 x mounting materials for EVO footpegsInstallation instructionsMounting materialsDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kg

EVO Passenger Footpeg KitThe original passenger footpeg does not provide a comfortable position? Then the EVO Passenger Footpeg Kit for the Harley-Davidson Pan America is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg mount. We show how this works in the installation instructions.Easy installation on the original passenger footpeg mount36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesExtra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and supportMade of electropolished, corrosion-resistant stainless steel castingMounting materials includedScope of Delivery2 x EVO footpegs2 x mounting materials for EVO passenger footpegInstallation instructionsMounting materialsDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.3 kg

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the Suzuki V-Strom 800DE.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized finish and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a textured surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to the textured surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersScope of Delivery1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelMaterial Thickness: 12.80 cmColor: Black / SilverTotal Weight: Approx. 0.3 kgApproval NoticeThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.