BMW Models - Closer - Higher - FurtherThe first adjustable handlebar adapter for BMW K1WE SET STANDARDS With the adjustable handlebar adapter, we have succeeded in manufacturing an adjustable adapter that fits nearly all series-produced motorcycles with tubular handlebars from 1910 to today and in the future – just like your BMW K1.Tubular handlebars have existed since the inception of series motorcycles. However, different arm lengths do too. There are some "lucky" ones among us who simply sit on the motorcycle and say: "This fits!". Many, however, wish for the handlebars to be a little closer or perhaps a bit higher.Every motorcyclist knows the tension in the body and neck area that arises from tense arm positions during longer rides. This well-known issue among racers is often resolved through surgical intervention. However, one must refrain from riding for 2-3 months afterward.No one needs to fool themselves: "I only have this today!". You will experience these issues on every ride. As long as you sit tense on the motorcycle, you will not achieve comfort while riding.We have now solved this problem for motorcycles with tubular handlebars.With the new development, no wish for adjustability remains unfulfilled. A full 70 mm closer - higher or further adjustment range is now available.This allows you to achieve a natural ergonomics for a healthier sitting position.With adjustment times of only about 2 minutes, the handlebars can be quickly adapted to the respective tour. A high handlebar position for highway riding followed by sporty cornering in the mountains is now no longer an obstacle.The adapters are equipped with a strong milled knurling on the holding pin. This has achieved an extreme anti-twist protection, which is especially necessary during strong braking maneuvers.The unsightly appearance of the M8 screws in the clamping blocks has been designed so that they are invisibly installed downwards.On the handlebar adapter with 22 mm, you can attach a ball for securing your navigation device.(see photo).For the BMW K1, the impact plate needs to be slightly adjusted.Please keep in mind that we cannot check all models. However, you can check on your motorcycle whether the brake and clutch hoses are long enough. We would appreciate it if you could share your experience with us. Always ensure that the lines are not strained or pinched. All items have been mounted and tested on original motorcycles - without any modifications.

ADVENTURE-RACK Luggage RackReady for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. Over 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for adventure touring bikes, large road, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade from lightweight yet robust 4 mm thick aluminum alloyDelivery Contents1 x ADVENTURE-RACK Luggage RackMounting instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 3.0 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

ADVENTURE-RACK Luggage RackSW-MOTECH manufactures this versatile ADVENTURE-RACK luggage rack suitable for the Yamaha Ténéré 700.Ready for great adventures: our ADVENTURE-RACK impresses with its extreme load capacity and function-oriented design. More than 15 years of experience in manufacturing luggage racks and feedback from customers and test riders have gone into the development of this aluminum luggage rack. Material thickness, weight, and geometry have been optimized for demanding tours as well as off-road use. The model-specific mounting elements ensure the best fit and easy installation at original mounting points. Specifically designed for travel enduros, large street, and sport touring machines, the ADVENTURE-RACK offers a generous support surface. Numerous large tie-down points provide secure hold for rear bags. The functional holes accommodate adapter kits for mounting top cases from SW-MOTECH, Givi, Krauser, and Shad or SysBag bags.The luggage rack has been tested under harsh conditions in the lab and in the field. Its robustness has been confirmed. The ADVENTURE-RACK carries your luggage to the ends of the earth or wherever you want to go.Especially robust luggage rack for long tours on and off the roadSelected manufacturing processes and its optimized shape give the ADVENTURE-RACK an extra portion of stabilityExtreme load capacity tested under harsh conditions in the lab and in the field for vibrations, impacts, and high weightMany functional holes: for TRAX top cases, SysBag bags with adapter plate are available separately for the respective adapter kitsAdapter kits for mounting top cases from other manufacturers (Givi Monokey and Monolock, Krauser, Shad I and II) are also availableEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleEspecially generous support surface (Width: 32.9 cm front, 22.5 cm rear, Length: 30.3 cm)Easy installation at original mounting points with model-specific mounting elementsEffective corrosion protection through black powder coatingMade of lightweight yet robust 4 mm thick aluminum alloyScope of Delivery1 x ADVENTURE-RACK luggage rackMounting instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackTotal weight: approx. 4.0 kgNot compatible withThe ADVENTURE-RACK cannot be mounted together with the original luggage rack for the solo seat of YamahaApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the mounting instructions must be observed.

Extension for STREET-RACK Luggage CarrierSafe transport of wide bags and luggage rolls: The sturdy extension nearly doubles the surface area of the STREET-RACK adapter plate. The numerous tie-down points and the raised elements at the front and back of the extension are ideal for securely fastening bulky luggage. A black powder coating protects the aluminum construction from corrosion and gives it an appealing look.Without any tools and with just one hand movement, the adapter plate can be mounted on the STREET-RACK luggage carrier. The adapter plate is simply slid onto the luggage carrier and securely locked in place with a twist-lock mechanism. After the trip, the adapter plate can be removed in seconds, leaving only the luggage carrier on the motorcycle.Generous surface area (30 x 45 cm) for easy transport of large tail bags and other bulky itemsEasy securing of luggage at numerous large tie-down points, threading of 25 mm buckles possibleParticularly quick attachment of the Rackpack tail bagSimple installation: the extension is easily screwed onto the adapter plate for STREET-RACK luggage carriersHigh-quality processed extension made of lightweight aluminumProtection against corrosion and abrasion through black powder coatingDelivery Contents1 x Extension for STREET-RACK luggage carrier1 x Adapter plate for STREET-RACK luggage carrierInstallation instructionsMounting materialsDetailsMaterial: AluminumSurface: powder-coatedColor: blackDimensions: 30.0 x 45.0 cmTotal weight: approx. 0.6 kg

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.1 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the tank fairingModel-specific variant for best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankDelivery Contents1 x EVO Tankring1 x Mounting PlateInstallation InstructionsMounting MaterialDetailsMaterial: fiberglass-reinforced plastic / steelSurface: powder-coatedColor: black / blackTotal Weight: approx. 0.3 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankDelivery Contents1 x EVO TankringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.1 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand and provide secure hold even during off-road rides.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.2 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand and provide secure hold even during off-road rides.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.3 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.2 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the tank fairingModel-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankDelivery Contents1 x EVO Tankring1 x Mounting PlateInstallation InstructionsMounting MaterialDetailsMaterial: fiberglass-reinforced plastic / steelSurface: powder-coatedColor: black / blackTotal Weight: approx. 0.4 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the tank fairingSecure and robust locking mechanismModel-specific variant for the best fit and individual solutionsEasy installation at the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ring1 x mounting plateInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.3 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the fuel cap ringModel-specific variant for best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ring1 x mounting plateInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plastic / steelSurface: powder-coatedColor: black / blackTotal weight: approx. 0.2 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.2 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand and provide secure hold even during off-road rides.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.1 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ring1 x tank ring adapter for Kawasaki modelsInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.2 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.1 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.1 kgNoteFor the KTM Duke 125/390 (17-) and 790 (18-), the EVO tank ring and thus the EVO tank bag are mounted rotated by 180 degrees.The tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankDelivery Contents1 x EVO TankringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.1 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ringInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.4 kgNoteNot compatible with handlebar risers or relocations.The tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the tank fairingModel-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ring1 x mounting plateInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plastic / steelSurface: powder-coatedColor: black / blackTotal weight: approx. 0.5 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the fuel cap ringModel-specific variant for best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ring1 x mounting plateInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plastic / steelSurface: powder-coatedColor: black / blackOverall weight: approx. 0.3 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringWith the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO tank ring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO tank ring provides secure support.For attachment to the fuel cap ringModel-specific variant for best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of delivery1 x EVO tank ring1 x mounting plateInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plastic / steelSurface: powder-coatedColor: black / blackTotal weight: approx. 0.3 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.

EVO TankringThe EVO Tankring for the Ténéré 700 World Raid is mounted on a model-specific attachment element that is secured to the two fuel filler necks. The attachment element is firmly bolted to the motorcycle's tank.With the introduction of the first tank ring featuring a convenient QUICK-LOCK mechanism, SW-MOTECH revolutionized motorcycle luggage. The patented EVO Tankring made of fiberglass-reinforced polyamide is tailored to the motorcycle model and impresses with its stability and optimal fit. EVO tank bags can be attached or removed with just one hand, and even during off-road rides, the EVO Tankring provides secure support.Model-specific variant for the best fit and individual solutionsEasy installation on the fuel filler neckQuick release via pull strap allows for removal of the EVO tank bag with one handEasy refueling, fuel cap can be opened as usualMade of fiberglass-reinforced polyamidePaint-friendly solution: the tank bag does not rest on the tankScope of Delivery1 x EVO Tankring1 x Mounting plateInstallation instructionsMounting materialsDetailsMaterial: fiberglass-reinforced plasticColor: blackTotal weight: approx. 0.5 kgNoteThe tank rings of the EVO series are not compatible with the PRO tank bags.