SKF Fork Seal + Dust Cap KIT 43_W suitable for KTM 790 Adventure / KTM 890 Adventure

These progressive fork springs are perfectly tailored to the requirements of the fork for the KTM 790 Adventure. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * KTM 790 Adventure from 2019*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable components for the rear of the KTM 790 Adventure in our accessory recommendations. Replacing only one component will not achieve optimal handling.Our recommendation: Have the conversion carried out by a specialist workshop.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the inner tubes.Do you have further questions? We are happy to advise you personally. Contact us

The Touratech Suspension Lowering Kit from the Dutch suspension specialist Hyperpro. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of 30mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the KTM 790 Adventure. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.Info: Fits only for *KTM 790 Adventure from 2019*Scope of delivery:- Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Info: Side stand and center stand can be used without modifications.Do you have further questions? We are happy to advise you personally. Contact us

The Touratech Suspension Cartridge Kit Extreme is simply put a shock absorber for the fork and the absolute premium class in terms of suspension technology. The Closed Cartridge is installed in the original fork. This keeps the fork bridge/handlebar mount, brakes, wheel guidance, and steering geometry fully intact. No additional modifications to the fork are required. This Close Cartridge is perfectly designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme requirements.   This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The spring preload, rebound, and compression damping are fully adjustable from the top. The damping oil is in a closed cartridge, allowing for precise dosing of the oil quantity. This provides the Close Cartridge with a significantly finer and more pleasant response of the fork. The very finely adjustable damping allows for an effective, precise, and personalized suspension setup for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or a spirited, ambitious riding style. Should exceptionally severe road conditions affect the front wheel, the integrated "Hydraulic Endstop" prevents mechanical bottoming out of the fork.   You will experience a completely new riding sensation with your motorcycle. The basic setup is tailored for the demanding adventure rider with luggage. Adjustments for exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of the appropriate spring rate and further configurations.   Scope of delivery: - 2x Closed Cartridge - with damping adjustment, (1x) rebound, (1x) compression. - with spring preload adjustment (using a 22mm wrench) - Adjustment tool for damping - Installation tool for the cap. - Installed and ready to ride, filled with pre-assembled fork spring. - 1 liter of oil (for fork installation) - User manual and installation instructions - 2x fork protection stickers.     Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

Eine Tieferlegung der Front mit Gabelfedern vom Touratech Suspension. Durch diesen Federnsatz erzielen Sie eine sinnvolle Tieferlegung um -30mm, ohne eine Verschlechterung der Fahreigenschaften. Natürlich geht etwas Bodenfreiheit verloren. Die stufenlos progressiven Federn sind perfekt auf die KTM 890 Adventure R abgestimmt und bieten ein deutlich verbessertes Ansprechverhalten und höhere Sicherheiten im Grenzbereich als die Original Gabelfedern .   Info: Passt nur für KTM 890 Adventure R (2021-2023)   Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrades angepasst werden. - Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt. - Die passenden Komponenten für Ihre KTM 890 Adventure R finden Sie im Zubehör dieses Artikels. „Bitte nach unten scrollen“   Lieferung inklusive: - Gabelfedern-30mm - Austauschfeder für Original Federbein. - inklusive ausführlicher Anbauanleitung. - passendes Gabelöl. - Paste zur Verbesserung der Gleitfähigkeit der Tauchrohre. - Anbauanleitung mit Set-Up Informationen,   Unsere Empfehlung: Lassen Sie den Umbau von einer Fachwerkstatt durchführen.   Sie haben weitere Fragen? Wir beraten Sie gern persönlich. Kontaktieren Sie uns. E-Mail: [email protected] Telefon +49 (0)7728-9279-1555   Bitte nutzen Sie dafür unseren Fahrwerkscheck-Bogen und senden Sie uns das Formular ausgefüllt zu.