Revit Motorcycle One-Piece Leather Suit Xena 4 Ladies
Product number:
1017-FOL040-1600-L38
Product information "Revit Motorcycle One-Piece Leather Suit Xena 4 Ladies"
For all the fast female riders out there who are fine-tuning their lap times and want to continuously improve, we bring you the Xena 4 leather suit. A high-tech one-piece, specially designed for women and tested on the racetrack.
Tailored for the racetrack
Since the inception of the Xena one-piece, the right fit has been at the top of the priority list. It’s already hard enough for women to find a suitable suit, let alone one that hugs the body in the right places while also allowing the necessary freedom of movement in the curves of the racetrack. By combining high-performance cowhide leather, strategically placed stretch panels, and the ability to adjust the knee sliders (not only for optimal comfort but also for optimal performance), we are able to help women get the best out of themselves and their suit.
Ready for racing
When you’re laying down your fastest lap times, you want to be able to rely on your safety in case something happens. We’ve got you covered. The Xena 4 Ladies one-piece is prepared for the Tech-Air™ airbag system. Since the female fit of the suit is smaller compared to the male version – also regarding the stretch panels – we recommend taking the next larger size if you want to use the airbag system. A variety of additional safety features (BETAC® elbow, knee, and shoulder protectors), safety seams, and much more ensure a CE certification of class AAA.
Features
Protection
Prepared for SEESOFT CE-Level 2 back protector
The back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.
SEESMART CE-Level 1 hip protectors
SEESMART hip protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.
Safety seams
The seams determine the durability of a motorcycle garment in a fall. That’s why REV’IT! uses only safety seams in areas at risk of falling. These have a visible and an invisible seam. This construction keeps the outer shell together even if the visible seam is worn through.
TPU protectors on the shoulder
TPU protectors on the knees
TPU elbow sliders
Tailbone protection
BETAC® shoulder protectors "S" Type A-L1
This product includes the impact-absorbing BETAC® shoulder protectors "S" Type A-L1. "S" stands for shoulder – the area of the body it protects – Type A refers to the area it covers (which is smaller compared to the Type B variant), and L1 stands for CE certification according to Level 1.
BETAC® elbow protectors "E" Type A-L1
This product includes the impact-absorbing BETAC® elbow protectors "E" Type A-L1. "E" stands for elbow – the area of the body it protects – Type B refers to the area it covers (which is smaller compared to the Type A variant), and L1 stands for CE certification according to Level 1.
BETAC® knee protectors "K+L" Type A-L1
This product includes the impact-absorbing BETAC® knee protectors "K+L" Type A-L1. "K+L" stands for knee and lower leg – the area of the body it protects – Type A refers to the area it covers (which is smaller compared to the Type B variant), and L1 stands for CE certification according to Level 1.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment, you can wear our REV'IT! Avertum Tech-Air® airbag or a Tech5 airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your bust circumference and divide the value by two. 2. Measure the garment flat at the bust line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To make room for the expansion of the airbag, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.
Ventilation
Ventilation panels on the thighs
The ventilation panels on this garment allow for optimal airflow, cooling the body while riding.
Ventilation panels on the forearms
The ventilation panels on this garment allow for optimal airflow, cooling the body while riding.
Ventilation panels on the back
The ventilation panels on this garment allow for optimal airflow, cooling the body while riding.
Ventilation panel at the mid-front
Visibility
Reflective logo on the back
Reflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.
Pockets
Inner pocket
Fit
Tight fit
Tight Fit is designed to fit snugly and conform to the rider's body shape. The contoured design ensures that the fabric moves with the body without restricting independence in any situation. This fit is primarily found in base layers and in our race-oriented garments.
Lining
Removable lining
Mesh
Polyamide stretch
Integrated stretch made from durable polyamide in the lining provides comfort and fit.
Features
Aero hump
Comfort collar
The comfort collar adds extra coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.
Comfort cuffs
Zip at the cuff
The zip at the sleeve cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer layer and over your base layer.
Stretch in the crotch
Stretch on the shoulder
Stretch panels on the shoulder
Stretch panels
Soft collar edge
The inside of the collar is equipped with a soft fabric for more wearing comfort.
Stretch in the sleeves
Stretch at the armholes
Stretch at the front
Stretchable arm cuff
Stretch at the calf
Wind catcher behind the front zipper
Stretch at the ankle
Stretch at the ankle provides this garment with more freedom of movement and comfort, as well as easy on and off.
Calf zipper for easy entry
This garment has a zipper at the calf to facilitate putting on and taking off despite the tight racing fit. When putting it on, simply open it for more space and close it when you’re ready to go.
Outer fabric
Neoprene
Neoprene is a synthetic rubber and useful for protective clothing: it is abrasion-resistant, insensitive to chemicals, waterproof, slightly stretchy, and elastic.
3D Air Mesh
This knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.
PWR|Shell Stretch
NULL
Cowhide leather
This garment uses cowhide leather for optimal fit and protection.
Perforated cowhide leather
Artificial leather
A synthetic leather version with a similar appearance.
Artificial nubuck
Login