Revit Motorcycle Jacket Morgan
Product number:
1017-FJL145-0010-M58
Product information "Revit Motorcycle Jacket Morgan"
Classic cut with a special twist. This is the Morgan jacket, the first of its kind in our Heritage collection.
Where adventure meets tradition
The combination of functions that we use in one area and transfer to another is not unknown at REV'IT! So when we brought the idea of a zippered ventilation panel in the lining – as currently used in our Offtrack adventure jacket – into the development of the Morgan, it made perfect sense. The jacket is lined with a windstopper material, but when you open the specially crafted, laser-cut ventilation elements, air can flow freely to the body. This is also due to the perforated full-grain leather inserts on the front.
Staying stylish
With its high collar, wide shoulder area, tailored fit, and seamlessly integrated side pockets, the Morgan jacket meets all the criteria to be stylish without being too flashy. Additionally, the CE AA classification, integrated SEESMART elbow and shoulder protectors, and safety seams ensure that you look good and are protected on the road.
Features
Insulation
Removable thermal body warmer
Windcatcher behind the front zipper
There is a wind-blocking flap behind the front zipper.
Windcatcher behind cuff zipper
Windproof window inside
As this garment is naturally ventilated, it features a unique internal windproof window that keeps the cold out. When temperatures rise, simply unzip the side of the window, roll it down, stow it in its own pocket, and continue riding. When it gets colder, zip it back up. A clever solution for generous ventilation or wind protection as needed.
Protection
Prepared for SEESOFT CE-Level 2 back protector
The back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.
SEESMART CE-Level 1 shoulder protectors
SEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.
Safety seams
The seams determine the durability of a motorcycle garment in a fall. That’s why REV’IT! uses only safety seams in crash-prone areas. These have a visible and an invisible seam. This construction keeps the outer shell together even if the visible seam is worn through.
SEESMART CE-Level 1 elbow protectors
SEESMART elbow protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.
Adjustment options
Adjustment straps at the waist
Pockets
Slip pocket at the waist
Inner pocket
Fit
Slim Fit
Slim Fit accentuates the natural body shape and provides a sleek and elegant appearance. It features a tighter and narrower cut that highlights certain body areas. Despite the slimmer profile, Slim Fit still offers plenty of comfort and freedom of movement where needed.
Lining
3D mesh
Mesh
Polyester ripstop
Polyester ripstop is a lightweight fabric with special fibers woven into the base material at specific points. This creates high resistance to tearing.
Features
Short connection zipper
The short connection zipper is the shorter, simpler, and faster choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.
Jeans loop
With the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making riding with a bare back a thing of the past.
Cuff zipper
The zipper at the sleeve cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer layer and over your base layer.
Wind collar tab
Outer fabric
full-grain, soft cowhide
Ventilation
Ventilation panel at the middle front
Visibility
Reflective logo on the back
Retro-reflective, fluorescent label on the back for better visibility and increased safety in low light conditions.
Login