Revit Motorcycle Jacket Component 2 H2O
Product number:
1017-FJT353-0010-XXL
Product information "Revit Motorcycle Jacket Component 2 H2O"
Die Component 2 H2O is the evolution of a modern classic from the DIRT Series. It builds on the popular, function-oriented design approach of this top adventure jacket, enhancing its outstanding details and adding a few more.
Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, form and function stand in fashionable harmony. This does not mean it is a compromise – quite the opposite. The strategically coordinated, abrasion-resistant materials Cordura® Ripstop and PWR|Shell Stretch Ripstop give the Component 2 H2O a durable, long-lasting appearance alongside its lightweight properties. With a 100 percent wind- and waterproof laminated hydratex membrane, SEESMART CE-Level 2 protectors, and an additional pocket for an optional SEESOFT CE-Level 2 back protector, the Component 2 H2O pulls out all the stops.
Dive into adventure
With the removable hood, comfortable neoprene collar, and good ventilation, the Component 2 H2O is ready for the road. It has everything you need to explore the less-traveled roads – or to leave them altogether. The active fit provides a casual outdoor feel, while the generous sizing is primarily designed to fit over our Proteus protector jacket when you really want to dive into adventure.
Features
Ventilation
Zippers on the forearms
Zippers on the upper arms
Zipper on the upper back
Waterproofing
hydratex I 3L
A 3-layer construction; the hydratex|3L membrane has a protective layer of tricot fabric laminated to the back of the membrane. This results in a waterproof and breathable membrane that is also very durable.
Protection
Prepared for SEESOFT CE-Level 2 back protector
The back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.
SEESMART CE-Level 1 elbow protectors
SEESMART CE-Level 1 shoulder protectors
SEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.
Visibility
Reflective logo on the back
Reflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.
Laminated reflective logo on the back
This product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.
Laminated reflective material on the hood
Reflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.
Laminated reflective material on the collar
Reflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.
Pockets
Two inner pockets
Waterproof pocket at the waist
Slip pocket on the back
A slit pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.
Adjustment options
Adjustable tab at the cuffs
Drawstring for waist adjustment
Features
Comfort collar
The comfort collar adds extra coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.
Removable hood
The zippered hood is easily detachable from the jacket.
Adjustable drawstring on the hood
Fit
Active fit
Active Fit means full freedom of movement while minimizing material that could restrict mobility. It is intelligently tailored and adapts to the body where needed. At the same time, it allows unrestricted mobility during activity-oriented movements.
Outer fabric
Neoprene
Neoprene is a synthetic rubber and useful for protective clothing: it is abrasion-resistant, insensitive to chemicals, waterproof, slightly stretchable, and elastic.
3L CORDURA® 750D Ripstop
A three-layer CORDURA® with ripstop properties.
PWR|Shell Ripstop-Stretch
Due to its special ripstop weaving method, durability and abrasion resistance are among the special characteristics of PWR|Shell. Thick threads woven in a cross pattern at regular intervals prevent the fabric from tearing further.
Login