Revit Adventure Offroad Motorcycle Jacket Continent
Product number:
1017-FJT336-0130-XXL
Product information "Revit Adventure Offroad Motorcycle Jacket Continent"
The Continent WB Jacket is an adventure-ready high-tech jacket from our DIRT Series that offers much more than meets the eye at first glance. It has been designed with serious adventure tours in mind and adapts to changing conditions.
When the going gets tough
The Continent WB has been designed and certified to be ready for action immediately. The SEESMART protection ensures that your elbows and shoulders are protected from injuries, and there is a pocket for a SEESOFT back protector. However, it is also possible to remove the standard protectors and wear the Continent WB jacket over our Proteus protector jacket with CE Level 1 and 2 certified impact absorbers when the going gets tough.
Functional beyond looks and feel
The elastic softshell construction not only looks functional but feels that way too – especially when the sleeves have been removed for even more freedom of movement and ventilation. As the Continent WB is a transitional jacket, the sleeves can be removed at the shoulders, allowing it to quickly transform from a jacket for moderate temperatures into a fully-fledged, warming off-road vest.
Features
Insulation
WindBarrier®
The REV’IT! WindBarrier® membrane is laminated between two different fabric layers: an elastic outer layer and a soft fleece inner layer. This combination blocks wind and helps repel water. Stopping wind and rain means preventing hypothermia and increasing the comfort and warmth level of the rider.
Protection
Prepared for SEESOFT CE-Level 2 back protector
The back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.
SEESMART CE-Level 1 elbow protectors
SEESMART CE-Level 1 shoulder protectors
SEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 both at normal and high (T+) ambient temperatures.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.
Ventilation
Perforation on the upper front
Visibility
Laminated reflective material on the upper arms
Reflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.
Reflective logo on the back
Reflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.
Laminated reflective logo on the back
This product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.
Pockets
Two front pockets
Inner pocket
Back pocket
A slit pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.
Adjustment options
Adjustable tabs at the cuffs
Drawstring for waist adjustment
Fit
Active fit
Active Fit means full freedom of movement while minimizing material that could restrict mobility. It is intelligently tailored and adapts to the body where needed. At the same time, it allows unrestricted mobility during activity-oriented movements.
Outer fabric
Softshell 3L
CORDURA® 750D Ripstop
CORDURA® with ripstop properties.
Features
Elastic key cord in the pocket
An integrated elastic cord in the pocket secures your keys and makes them quickly accessible.
Removable sleeves
Removable sleeves for more freedom of movement and additional cooling for the arms.
Sustainability
Outer shell made with recycled polyester
Login